Kodak Camera Accessories H 1 7299T User Manual

February 2005 H-1-7299t  
TECHNICAL DATA / COLOR NEGATIVE FILM  
KODAK VISION2 HD Color Scan  
Film 7299  
SMPTE RP131-2002, and KODAK Publications No. H-1,  
KODAK Motion Picture Film available online at http://  
The Book of Film Care.  
KODAK VISION2 HD Color Scan Film 7299 is a  
high-speed color negative motion picture film designed for  
use with the KODAK VISION2 HD System. When  
transferred to video via telecine and used in conjunction with  
image processing available in the KODAK VISION2 HD  
Digital Processor, 7299 Film can be automatically  
manipulated to reproduce the tone and color characteristics  
of other Kodak color negative films. 7299 Film, itself, has  
been optimized specifically for scanning applications to  
provide superior light capture and image rendition for  
transfer to digital data.  
When used correctly in the KODAK VISION2 HD  
System, 7299 Film can be properly exposed at an exposure  
index of either 500 for high-speed applications or 320 for  
lower-speed applications. It can also be exposed properly in  
either daylight or tungsten shooting conditions without the  
use of corrective filters. Image processing used in the  
KODAK VISION2 HD Digital Processor will automatically  
compensate for these different exposure conditions to  
produce properly balanced video images.  
EXPOSURE INDEXES  
High-Speed Application: Tungsten (3200 K) - 500  
Lower-Speed Application: Tungsten (3200 K) - 320  
Use these indexes with incident- or reflected-light  
exposure meters and cameras marked for ISO or ASA speeds  
or exposure indexes. These indexes apply for meter readings  
of average subjects made from the camera position or for  
readings made from a gray card of 18-percent reflectance  
held close to and in front of the subject. For unusually light-  
or dark-colored subjects, decrease or increase the exposure  
indicated by the meter accordingly.  
KODAK VISION2 HD Color Scan Film 7299 has been  
designed for optimum performance at an exposure index of  
both 500 and 320. EI500 can be chosen in low-light  
situations where speed is required with no degradation in  
image quality, shadow detail, or black level. EI320 can be  
chosen if light is sufficient or if improved shadow rendition  
is desired. When properly used with the KODAK VISION2  
HD Digital Processor, 7299 Film is also capable of being  
shot without correction in either tungsten or daylight  
sources. It should be noted, however, that the designed color  
balance of the film is 3200 K tungsten, and a KODAK  
WRATTEN Filter No. 85 can be used to balance daylight  
exposures on the camera if desired (though the exposure  
index must be adjusted by 23 stops accordingly).  
BASE  
KODAK VISION2 HD Color Scan Film 7299 has an acetate  
safety base with rem-jet backing.  
DARKROOM RECOMMENDATIONS  
Do not use a safelight. Handle unprocessed film in total  
darkness.  
STORAGE  
Store unexposed film at 13°C (55°F) or lower. For extended  
storage, store at -18°C (0°F) or lower. Process exposed film  
promptly. Store processed film according to the  
COLOR BALANCE  
When correctly used in the KODAK VISION2 HD System  
with the KODAK VISION2 HD Digital Processor, this film  
can be properly exposed in either tungsten (3200 K) or  
daylight (5500 K) sources. Natively, however, the film is  
balanced for exposure with tungsten illumination (3200 K)  
and filtration can be used for other illuminant sources if  
desired. For tungsten shooting, you can also expose this film  
with lamps that have slightly higher or lower color  
temperatures (+/- 150 K) without correction filters, since  
final color balancing can be done in telecine transfer. For  
other light sources, use the correction filters in the table  
below. Separate tables are listed for shooting 7299 Film at a  
nominal speed of EI500 and EI320.  
recommendations in ANSI/PIMA IT9.11-1998: for  
medium-term storage (minimum of ten years), store at  
10°C (50°F) or lower at a relative humidity of 20 to 30  
percent; for extended-term storage (for preservation of  
material having permanent value), store at 2°C (35°F) or  
lower at a relative humidity of 20 to 30 percent. For active  
use, store at 25°C (77°F) or lower, at a relative humidity of  
50 +/- 5 percent. This relates to optimized film handling  
rather than preservation; static, dust-attraction and  
curl-related problems are generally minimized at the higher  
relative humidity. After usage, the film should be returned to  
the appropriate medium- or long-term storage conditions as  
soon as possible.  
For more information about medium- and long-term  
storage, see ANSI/PIMA IT9.11-1998,  
©Eastman Kodak Company, 2005  
 
EXPOSURE TABLE - TUNGSTEN LIGHT  
FILM-TO-VIDEO TRANSFERS  
At 24 frames per second (fps), 170-degree shutter opening:  
KODAK VISION2 HD Color Scan Film 7299 is intended  
exclusively for telecine transfer using the KODAK VISION2  
HD Digital Processor. With the telecine set to the nominal  
starting conditions as recommended for the KODAK  
VISION2 HD System, color and tone characteristics can be  
automatically set to match the baseline technical starting  
point of any other Kodak color negative film. Once set to this  
starting condition, normal color correction can be applied as  
with any other typical motion picture negative film.  
For more information on the KODAK VISION2 HD  
System, please refer to the KODAK VISION2 HD Digital  
Processor User Guide, Part No. 4F2310.  
KODAK VISION2 HD Color Scan Film at  
nominal speed of EI500  
Lens  
Aperture  
f/1.4 f/2 f/2.8 f/4 f/5.6 f/8 f/11 f/16  
Footcandles  
Required  
5
10  
20  
40  
80 160 320 640  
KODAK VISION2 HD Color Scan Film at  
nominal speed of EI320  
Lens  
Aperture  
f/1.4 f/2 f/2.8 f/4 f/5.6 f/8 f/11 f/16  
IMAGE STRUCTURE  
Footcandles  
Required  
8
16  
32  
64 125 250 500 1000  
The modulation-transfer and diffuse rms granularity curves  
were generated from samples of 7299 Film exposed with  
tungsten light and processed as recommended in Process  
ECN-2 chemicals. For more information on image-structure  
characteristics, see KODAK Publication No. H-1, KODAK  
Motion Picture Film available online at http://  
Use this table for average subjects that contain a  
combination of light, medium, and dark colors. When a  
subject includes only pastels, use at least 12 stop less  
exposure; dark colors require 12 stop more exposure.  
RECIPROCITY CHARACTERISTICS  
MTF  
You do not need to make any filter corrections or exposure  
adjustments for exposure times from 1/1000 to 1 second. If  
your exposure is in the 10 second range, it is recommended  
that you increase your exposure by1 stop and use a KODAK  
Color Compensating Filter CC 10R.  
The "perceived" sharpness of any film depends on various  
components of the motion picture production system. The  
camera and projector lenses and film printers, among other  
factors, all play a role. But the specific sharpness of a film  
can be measured and charted in the Modulation Transfer  
Curve.  
PROCESSING  
Process in Process ECN-2.  
rms Granularity:  
Refer to curve.  
Read with a microdensitometer, (red, green, blue) using a  
48-micrometer aperture.  
The "perception" of the graininess of any film is highly  
dependent on scene content, complexity, color, and density.  
Other factors, such as film age, processing, exposure  
conditions, and telecine transfer may also have significant  
effects.  
Most commercial motion-picture laboratories provide a  
processing service for these films. See KODAK Publication  
No. H-24.07, Processing KODAK Color Negative Motion  
Picture Films, Module 7 available online at http://  
h2407.pdf, for more information on the solution formulas  
and the procedure for machine processing these films. There  
are also pre-packaged kits available for preparing the  
processing solutions. For more information on the  
EASTMAN ECN-2 Kit Chemicals, check Kodak's Motion  
Picture Films for Professional Use price catalog.  
IDENTIFICATION  
After processing, the product code numbers 7299 (16 mm),  
emulsion, roll, and strip number identification, KEYKODE  
Numbers, and manufacturer/film identification code (EI) are  
visible along the length of the film.  
KODAK VISION2 HD Color Scan Film 7299 H-1-7299t  
3
 
CURVES  
Diffuse rms Granularity Curves  
Sensitometric Curves  
3.0  
2.8  
2.6  
2.4  
Log Exposure (lux seconds)  
-0.6  
-3.6 -3.0 -2.4 -1.8 -1.2  
0
Process ECN-2  
3.0  
Exposure: 3200 K Tungsten 1/50 sec  
Process: ECN-2; Status M  
B
2.2  
2.0  
G
0.10  
1.8  
1.6  
1.4  
2.0  
1.0  
0.0  
0.05  
0.04  
0.03  
R
B
0.02  
1.2  
1.0  
0.01  
G
0.8  
0.006  
B
0.005  
0.004  
0.003  
R
0.6  
0.4  
0.2  
0.0  
G
0.002  
R
0.001  
0.0  
1.0  
2.0  
3.0  
4.0  
5.0  
-8 -7 -6 -5 -4 -3 -2 -1  
0
1
2
3
4
5
6
7
8
9
LOG RELATIVE EXPOSURE  
TI2636C  
Camera Stops  
To find the rms Granularity value for a given density, find  
the density on the left vertical scale and follow horizontally  
to the characteristic curve and then go vertically (up or  
down) to the granularity curve. At that point, follow  
horizontally to the Granularity Sigma D scale on the right.  
Read the number and multiply by 1000 for the rms value.  
The curves describe this film's response to red, green, and  
blue light. Sensitometric curves determine the change in  
density on the film for a given change in log exposure.1  
Modulation-Transfer Function Curves  
Note: This curve represents granularity based on modified  
measuring techniques.1  
1000  
Exposure: Tungsten 3200 K;  
Process: ECN-2  
100  
B
G
R
10  
1
1
10  
100  
1000  
SPATIAL FREQUENCY (cycles/mm)  
This graph shows a measure of the visual sharpness of this  
film. The x-axis, "Spatial Frequency," refers to the number  
of sine waves per millimeter that can be resolved. The y-axis,  
"Response," corresponds to film sharpness. The longer and  
flatter the line, the more sine waves per millimeter that can  
be resolved with a high degree of sharpness—and, the  
sharper the film.  
1.NOTE: Sensitometric and Diffuse RMS Granularity  
curves are produced on different equipment. A slight  
variation in curve shape may be noticed.  
4
KODAK VISION2 HD Color Scan Film 7299 H-1-7299t  
 
 
Spectral Dye Density Curves  
Spectral Sensitivity Curves  
1.8  
4.0  
3.0  
Process: ECN-2; D-mins subtracted  
Effective Exposure: 1/25 sec;  
Process ECN-2; Status M; D=0.2>D-min  
1.6  
1.4  
Midscale Neutral  
Magenta-  
Forming  
Layer  
Yellow-  
Forming  
Layer  
1.2  
1.0  
Cyan  
Magenta  
2.0  
1.0  
Cyan-  
Forming  
Layer  
0.8  
0.6  
Yellow  
0.4  
0.2  
0.0  
Minimum Density  
0.0  
250 300 350 400 450 500 550 600 650 700 750  
WAVELENGTH (nm)  
*Sensitivity = reciprocal of exposure (erg/cm2 ) required  
to produce specified density  
-0.2  
300 350 400 450 500 550 600 650 700 750 800  
TI2636D  
TI2636E  
WAVELENGTH (nm)  
These curves depict the spectral absorptions of the dyes  
formed when the film is processed. They are useful for  
adjusting or optimizing any device that scans or prints the  
film.  
These curves depict the sensitivity of this film to the  
spectrum of light. They are useful for determining,  
modifying, and optimizing exposure for blue- and  
green-screen special-effects work.  
Note: Cyan, Magenta, and Yellow Dye Curves are  
peak-normalized.  
NOTICE: The sensitometric curves and data in this publication represent product tested  
under the conditions of exposure and processing specified. They are representative of  
production coatings, and therefore do not apply directly to a particular box or roll of  
photographic material. They do not represent standards or specifications that must be met  
by Eastman Kodak Company. The company reserves the right to change and improve  
product characteristics at any time.  
SIZES AVAILABLE  
Standard Products Available  
Length in  
Metres (Feet)  
Identification No.  
Core  
Description  
Perforations  
16 mm SP457  
16 mm SP458  
122 (400)  
T
Z
Winding B  
Winding B  
1R-7605 (1R-2994)  
1R-7605 (1R-2994)  
244 (800)  
KODAK VISION2 HD Color Scan Film 7299 H-1-7299t  
5
 
MORE INFORMATION  
Outside the United States and Canada, please contact your Kodak representative.  
You can also visit our web site at www.kodak.com/go/motion for further information. You may want to bookmark our location  
so you can find us easily the next time.  
Films  
Cinematographer’s Field Guide  
KODAK Publication No. H-2  
Image Structure  
Specification Numbers  
Storage  
KODAK Motion Picture Film  
KODAK Publication No. H-1  
Cinematographer’s Field Guide  
KODAK Publication No. H-2  
KODAK Motion Picture Film  
KODAK Publication No. H-1  
The Book of Film Care  
KODAK Publication No. H-23  
LAD  
LAD—Laboratory Aim Density  
KODAK Publication No. H-61  
Transfer  
KODAK Telecine Analysis Film User’s Guide  
KODAK Publication No. H-822  
KODAK Telecine Exposure Calibration Film User’s Guide  
KODAK Publication No. H-807  
6
KODAK VISION2 HD Color Scan Film 7299 H-1-7299t  
 
KODAK VISION2 HD Color Scan Film 7299  
Kodak Locations  
FOR DIRECT ORDERING IN THE UNITED STATES  
AND CANADA: 1-800-621-FILM  
EUROPEAN, AFRICAN, AND ME  
REGION  
Eastman Kodak Company  
Kodak Ltd. Kodak House  
Hemel Hempstead  
Herts, HP1 1JU England  
Local: 01442-845-945  
Fax: 01442-844-458  
CHICAGO, ILLINOIS  
Information: 630-910-4929  
DALLAS, TEXAS  
Information: 972-346-2979  
Eastman Kodak SA  
29-31 Route de l'aeroport  
Case postale 271  
Le grand Sacconex, 1215  
Geneve 15  
HOLLYWOOD, CALIFORNIA  
6700 Santa Monica Boulevard  
Los Angeles, California  
90038-1203  
Information: 323-464-6131  
Information: +41-22-747-2000  
Fax: +41-22-747-2200  
NEW YORK, NEW YORK  
360 West 31st Street  
New York, New York  
10001-2727  
ASIA PACIFIC REGION  
Information: 212-631-3418  
AUSTRALIA  
LATIN AMERICA REGION  
8600 NW 17th Street  
Suite 200  
Miami, Florida 33126-1006  
Phone: 305-507-5146  
Melbourne: 613-9353-2561  
Toll free: 1-800-337-935  
CHINA (Peoples Republic)  
Beijing: 8610-6561-6561  
Shanghai: 8621-6350-0888  
Guangzhou: 8620-8319-8888  
VERDUN, QUEBEC  
Kodak Canada, Inc.  
4 Place du Commerce, Suite 100  
Ile des Soeurs  
Verdun, Quebec  
Canada H3E 1J4  
HONG KONG  
Tel: 852-2564-9352  
INDIA  
91-22-652-6826  
Information: 514-761-7001  
Fax: 514-768-1563  
Orders: 1-800-621-FILM (3456)  
Fax Orders: 1-866-211-6311  
INDONESIA  
62-21-570-5212  
JAPAN  
81-3-5644-5348  
TORONTO, ONTARIO  
Kodak Canada Inc.  
3500 Eglinton Avenue West  
KOREA  
82-2-708-5561  
Toronto, Ontario  
Canada M6M 1V3  
1-800-621-FILM (3456)  
MALAYSIA  
60-3-757-2722  
NEW ZEALAND  
BURNABY, BRITISH COLUMBIA  
Kodak Canada, Inc.  
4185 Still Creek Drive  
64-9-302-8665  
PAKISTAN  
92-21-561-0150  
Suite C150  
PHILIPPINES  
632-810-0331  
Burnaby, British Columbia  
Canada V5C 6G9  
Tel: 1-800-621-FILM (3456)  
SINGAPORE  
65-476-9688  
TAIWAN  
886-2-2893-8108  
THAILAND  
66-2-271-3040 Ext. 310  
KODAK VISION2 HD Color Scan  
Film 7299  
Kodak, Eastman, Keykode, Vision2, and Wratten are trademarks.  
New 2-05  
Printed in U.S.A.  
KODAK Publication No. H-1-7299t  
 

InFocus Car Video System INF7001A User Manual
Intel Smoke Alarm 09 User Manual
IOGear Switch GHPB42 User Manual
Jade Range Griddle JGM 2424 User Manual
Jenn Air Dishwasher JDB8910 User Manual
JVC Camera Lens HZ CA13U User Manual
Kenmore Sander 808353 User Manual
Kenwood Stereo Receiver KMD PS971R User Manual
Kompernass Fan KH1520 User Manual
Kramer Electronics Stereo Receiver 6X1 User Manual