NETGEAR TV Video Accessories PTV3000 100NAS User Manual

3. On your laptop, launch the Intel Wireless Display software. There are two ways  
Installation  
To install and set up the Push2TV adapter with Intel WiDi:  
to launch the software  
Installation Guide  
If your laptop has a  
button or key, press it.  
From Windows, select Start. In the search field, type Intel Wireless Display.  
1. Connect the Push2TV adapter to your TV and plug in the power adapter.  
Select and run the Intel Wireless Display software.  
4. Use the Intel Wireless Display software to scan and find the Push2TV adapter.  
Push2TV Adapter for Wireless Display (PTV3000)  
The screen on the right shows that the  
Intel Wireless Display software has found  
the wireless adapter.  
Package Contents  
5. Double-click the detected Push2TV  
adapter to connect to it.  
6. If you are connecting the laptop to the  
Push2TV adapter for the first time, the  
Push2TV adapter displays a 4-digit  
security code on the TV. Enter this 4-digit  
security code into the Intel Wireless  
Display software.  
Push2TV  
adapter  
Power  
adapter  
The Push2TV adapter LED is blinking when the adapter powers up. The LED  
turns solid to indicate that the adapter is ready, but is not yet connected to your  
computer.  
2. Turn on your TV and select the correct TV input source for your TV.  
USB power cable  
If you are not sure which input source to use, check the documentation that  
came with your TV set.  
Push2TV Front and Back Views  
The Ready for Connection screen displays on your TV within 30 seconds.  
7. Within a few seconds, the TV screen displays your laptop screen. The LED on  
the Push2TV adapter turns solid.  
You are now ready to use Push2TV for Intel Wireless Display.  
LED  
Adjusting Your TV Display  
You can adjust the image display on the TV screen:  
To change how the image fits on the TV screen, on the Intel Wireless Display,  
click the Properties button. Then click the Resize TV picture button and adjust  
the picture using the plus or minus symbols.  
Reset  
Wireless  
Display  
Mode /  
WPS  
To remove black bars displayed on the sides of your TV screen, open the  
graphics properties and change the resolution to 1280x720. Changing the  
resolution might result in black bars on the laptop. To remove the black bars,  
open the graphics properties and clear the preserve aspect ratio check box.  
If you do not see this screen, make sure that the TV input is set to the HDMI  
port where the Push2TV adapter is connected and all cable connections are  
firmly secured.  
HDMI  
USB Power  
 

Miele Clothes Dryer T8402C User Manual
NAD Stereo Receiver T741 User Manual
NEC Projector WT600 User Manual
NEC Speaker SP P42P1 User Manual
Nikon Camcorder D40x User Manual
Omega Vehicle Security Stud Sensor LVR2 Series User Manual
Onkyo Home Theater System HTP 693 User Manual
Optoma Technology Projector Accessories GT750 User Manual
Panasonic Camcorder AG DP800HP User Manual
Panasonic Car Stereo System CQ DF701W User Manual