PLDVD178USB
OWNER'S MANUAL
Mobile Video System
BAND
OSD
POWER
CLK
MODE
STOP
PLAY/PAUSE
MUTE
SLOW
SETUP
LO/DX
MO/ST
TITLE/PBC
A/P
REPEAT
ANGLE
GOTO
VOL+
EQ
SEL
VOL-
1
ENTER
2
3
4
5
6
9
7
0
8
MENU
SW
+10
DVD/VCD/CD/MP3 PLAYER WITH
AM/FM-STEREO DIGITAL PLL TUNING RADIO
WITH ANTI-THEFT FLIP DOWN DETACHABLE PANEL
SAFETY INFORMATION
CAUTION:
THIS DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS DVD PLAYER
USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS
RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE DVD PLAYER
CORRECTLY AS INSTRUCTED.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.DO NOT OPEN COVERS AND - DO NOT REPAIR YOURSELF. REFER
SERVICINGTO QUALIFIED PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR MOISTURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,AND ANNOYING
INTERFERENCE,USE ONLY THE RECOMMENDED ACCESSORIES.
THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION.
This product incorporates copyright protection technology that is protected by method
claims of certain U.S. patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
REGION MANAGEMENT INFORMATION:
This DVD Player is designed and manufactured to respond to the Region Management
Information that is recordedon a DVD disc. If the Region number described on the
DVD disc does not correspond to the Region number of this DVD Player, this DVD
Player cannot play this disc.
2
DISC NOTES
Disc formats supported by this player
Label side up
DVD
12 cm disc
(Single-sided disc only)
Video CD
12 cm disc
CD
Do not touch
the underside
of the disc
12 cm disc
MP3
12 cm disc
Discs which cannot be played with this
player
Do not bend
• DVD-ROM
• DVD-R/DVD-RAM
• CDV
• CD-G
Wipe the disc from center
toward the outside edge
Handling and Cleaning
• Dirt, dust, scratches and warping disc
will cause misoperation.
• Do not place stickers or make
scratches on discs.
Preparing New Discs with Rough
Spots
• Do not warp discs.
A new disc may have rough edges on its
inside and outside edges. If a disc with
rough edges is used, the proper setting
will not be performed and the player will
not play the disc. Therefore, remove the
rough edges in advance by using a ball
point pen or pencil as shown on the right.
To remove the rough edges, press the
side of the pen or pencil against the
inside and outside edges of the disc.
• A disc should always be kept in its
case when not in use to prevent from
damaging.
• Do not place discs in the following
places:
1. Direct sunlight
2. Dirty, dusty and damp areas
3. Near car heaters
4. On the seats or dashboard
Disc Cleaning
Rough spots on
outside edge
Use a dry soft cloth to wipe the surface.
If the disc is quite dirty, use a soft cloth
slightly moistured with isopropyl (rubbing)
alcohol. Never use solvents such as
benzine, thinner or conventional record
cleaners as they may mar the surface of
the disc.
Ball point pen
or pencil
Note:
A disc may become somewhat scratched
(although not enough to make it
unusable) depending on your handle it
and conditions in the usage environment.
Note these scratches are not an
indication of any problem with the player.
Rough spots
on inside edge
3
INSTALLATION
Notes:
• Choose the mounting location where the unit will not interfere with the normal
driving function of the driver.
• Before finally installing the unit, connect the wiring temporarily and make sure it is
all connected up properly and the unit and the system work properly.
• Use only the parts included with the unit to ensure proper installation. The use of
unauthorized parts can cause malfunctions.
• Consult with your nearest dealer if installation requires the drilling of holes or other
modifications of the vehicle.
• Install the unit where it does not get in the driver’s way and cannot injure the
passenger if there is a sudden stop, like an emergency stop.
• If installation angle exceeds 30˚ from horizontal, the unit might not give its optimum
performance.
30˚
• Avoid installing the unit where it would be subject to high temperature, such as from
direct sunlight, or from hot air, from the heater, or where it would be subject to dust,
dirt or excessive vibration.
DIN FRONT/REAR-MOUNT
This unit can be properly installed either from “Front” (conventional DIN Front-mount)
or “Rear” (DIN Rear-mount installation, utilizing threaded screw holes at the sides of the
unit chassis). For details, refer to the following illustrated installation methods.
4
INSTALLATION
DASH BOARD
METAL MOUNTING STRAP
HEX NUT
SPRING WASHER
CONSOLE
PLAIN WASHER
SLIDE BRACKET HOUSING
HEX BOLT
TAPPING SCREW
KEY PLATE
PLASTIC TRIM OUT
KEY PLATE
1. WHILE INSTALLING THE FRONT PANEL, PLEASE MOUNT THE LEFT SIDE FIRST, AND MAKE THE
DIRECTION HOLE ON THE FRONT PANEL AIM AT THE LEFT GUIDE ON THE UNIT.
2. THEN PUSH THE RIGHT SIDE TO MOUNT THE RIGHT GUIDE.
3. PUSH IT TO INSTALL THE FRONT PANEL COMPLETELY.
FRONT PANEL
5
INSTALLATION
CAUTION: DO NOT INSTALL THE DETACHABLE PANEL BEFORE CONNECTING THE
WIRE.
1. The unit is designed for negative terminal of the battery which is connected to the
vehicle metal. Please confirm it before installation.
2. If the car interior is extremely hot, as after being parked in the sun, do not use the
player until the car has been driven for a while to cool off the interior.
3.Press the OPEN button to flip down the front panel (see fig.1), Slide the guide knob
to remove the right side first, then take away the front panel (see fig.2) and put it in
the protective case (see fig.3) for safe keeping.
4. Install the front panel back into its bracket and then push it back to the position for
playing (see fig.4).
FRONT PANEL
GUIDE KNOB
OPEN BUTTON
( FIG.1)
( FIG.2)
PROTECTIVE CASE
FRONT PANEL
FRONT PANEL
( FIG.3)
( FIG.4)
6
ELECTRIC CONNECTION
WIRING CONNECTION
MAIN UNIT
USB
AUX (optional)
RCA CABLE
VIDEO IN YELLOW
RCH IN RED
ANTENNA CONNECTOR
LCH IN WHITE
GREY SUB WOOFER
VIDEO OUT 2 YELLOW
COAXIAL OUT BROWN
IGNITION
SWITCH (B+)
RED
REAR RCA OUTPUT CABLE (OPTIONAL)
RCH RED
LCH WHITE
FUSED
FILTER
BOX
MEMORY YELLOW
BACK-UP (B+)
FRONT RCA OUTPUTCABLE
FRONT RCA RED R
BLACK
VIDEO OUT 1 YELLOW
FRONT RCA WHITE L
GROUND (B-)
(FOR RCA LINE OUT VERSION ONLY)
FUSE
POWUTEOR
BLUE
ANTENNA
WHITE
GREY
FRONT
FRONT
Lch SPK.
Rch SPK.
WHITE/BLACK
GREY/BLACK
GREEN
VIOLET
REAR
REAR
Lch SPK.
Rch SPK.
GREEN/BLACK
VIOLET/BLACK
NOTE:
The accessory USB clip of this unit as below. On side clip the USB cable, the other
side clip the proper place to fixed the USB cable.
7
REMOTE CONTROL
14
1
BAND
OSD
POWER
CLK
MODE
2
15
17
STOP
PLAY/PAUSE
MUTE
SLOW
16
18
20
3
4
5
SETUP
LO/DX
MO/ST
TITLE/PBC
A/P
6
19
21
REPEAT
ANGLE
7
GOTO
VOL+
EQ
8
9
22
SEL
VOL-
1
ENTER
10
23
11
12
2
3
4
24
5
6
9
7
0
8
MENU
SW
+10
13
25
1. CLK
Press it to change the display to clock display.
Press it to change between radio or disc mode.
Press it to stop playback.
2. MODE
3. STOP
4. SETUP
5. MO/ST
(AUDIO)
Display the SETUP menu.
Press it to select STEREO or MONO (In disc stations, press it to
changing of the AUDIO soundtrack on multi-audio soundtrack DVD
disc. Changing of the sound mode of the VCD/CD disc)
Changing of the SUBTITLE language on multi-subtitle language
6. LO/DX
(SUBTITLE) DVD disc. In radio mode, press this button for distance reception
when you are located at weak signal location, depress it for stronger
signal.
7. REPEAT
8. GOTO
9.
10. SEL
Switch the Repeat mode of DVD/VCD/CD disc.
Disc search button, cooperatively used with numeric buttons
/
Press
to skip to the next track & press
to skip back one track.
Press it to change audio mode through Volume, Bass, Treble, Balance
and Fader modes.
11. VOL+/VOL- Press it to adjust volume level.
12. / / /
13. MENU/
Cursor buttons in MENU mode.
Press it to display the root menu of the DVD disc./ Press and hold for
SUBWOOFER more than 2 seconds can have subwoofer.
14. BAND(OSD) Display statistical disc information during playback (To change the
band in radio stations)
15. POWER
Press it to turn on the unit, press it again to turn off.
16. PLAY/PAUSE Press once to pause a play, press again to resume playback.
17. MUTE Press it to mute down sound.
18. TITLE/PBC Display the TITLE menu that is stored in DVD disc changing
(A/P)
between PBC ON and PBC OFF on the VCD disc. (Auto store and
preset scan function in radio stations.)
Changing for slow forward/reverse playback motion.
Changing of the view angle on multi-angle DVD disc
Press it to turn to equalization function.
19. SLOW
20. ANGLE
21. EQ
22.
/
Press
to start forward rapidly & to reverse rapidly.
23. ENTER
Confirm the Track/Chapter selected with the number key or selected
with the cursor buttons on TV screen.
Numeric buttons
24. 0 - 9
25. +10
Press it to select 10th digits
8
REMOTE CONTROL
Preparing the Remote Control
Inserting the Batteries
1. Open the battery compartment cover.
2. Insert the new batteries. Make sure that the positive and negative terminals of the
batteries are oriented indicated.
3. Close the cover
Using the Remote Control
Face the remote control towards the player front face IR mark (remote control signal
receiver).
Operation angle: About ± 30 degree in each the direction of the front of the IR mark.
To prevent damage to the unit, be sure to follow the connection diagram (page 7).
9
BASIC OPERATION
16
1
3
2
5 15
14
18 17 22
12
4
6
7
8
9
10
11 13
19
20 21
¤
÷
1. OPEN BUTTON
Press it to flip down the front panel. Then you can insert the CD disc into the CD
compartment. And you can find the OPEN button. Press it to eject the disc.
2-3. VOL +/ VOL - & SEL BUTTON
Press it to change audio mode through volume, bass, treble, balance, and fader
modes. Rotate VOL +/ VOL- knob to adjust the selected mode. When mode has
not been adjusted for several seconds, display returns to normal radio or CD display.
VOL
BAS
TRE
BAL
FAD
A. Volume: Adjust volume level by rotating VOL +/ VOL- knob.
Note:The unit is initially set to volume mode.
B. Bass: Press SEL button one time. Adjust bass level by rotating VOL +/ VOL-
knob.
C. Treble: Press SEL button two times. Adjust treble level by rotating VOL +/ VOL-
knob.
D. Balance: Press SEL button three times. Adjust sound balance between left and
right speakers by rotating VOL +/ VOL- knob.
E. Fader: Press SEL button four times. Adjust sound balance between front and
rear speakers by rotating VOL +/ VOL- knob.
10
BASIC OPERATION
4. BAND BUTTON
In RADIO mode, press the BAND button on the front panel or on the remote controller
to select your desired radio band and word which band is selected will be displayed
on LCD. Press it to change the bands as below:
FM
MW
LW
FM
MW
FM
AM
For 3 Bands (Europe)
5. EQ BUTTON
For 2 Bands (Europe)
For 2 Bands (USA)
Press it to turn to equalization function and to select desired audio mode. There
are four kinds of mode as below:
JAZZ
CLAS
POP
ROCK
6-7-8-9-10-11. PRESET STATION
A. To memorize the current frequency, press any one of the six preset buttons[1-
6] on the front panel or on the remote controller hold for more than 2 seconds.
B. To recall the preset memory, press one of the preset buttons [1-6].
C. Press 1/TOP button to select the first track/ chapter to play.
a. In the state of VCD/CD/MP3 disc playing, press the button on the front panel
to select the first track / chapter to play. (depending on the disc used for VCD)
b. In the state of DVD disc playing, the 1/TOP button is not available.
D. Press 2/RPT button to select repeat mode as follow:
DVD:
CHAPTER REPEAT ON
TITLE REPEAT ON
REPEAT OFF
VCD/CD:
REP-ONE
REP-ALL
a. Continuously repeat at the current chapter/track, when selected REP-ONE
mode.
b. Select REP-ALL mode to continuously repeat all chapter/track on the current
disc.
c. REPEAT feature does not support VCD2.0 (with PBC ON).
E. Press 3/INT button to scan disc.
a. In the state of VCD/CD disc playing, press the 3/INT button on the front panel
to play the previous 10 seconds part of each track/chapter on disc. (depend
on the disc used for VCD)
b. In the state of DVD/MP3 disc playing, the 3/INT button is not available.
F. Press 4/RDM to play disc in random.
a. In the state of VCD/CD/MP3 disc playing, press the 4/RDM button on the
front panel to play in random or select DISC REP. (depend on the disc used
for VCD)
b. In the state of DVD disc playing, the 4/RDM button is not available.
11
BASIC OPERATION
12. AS/PS BUTTON
When shortly pressing the APS button on the front panel or the A/P button on the
remote controller, the radio searches for each preset station. When the field
strength level is more than the threshold level of stop level, the radio is holding at
that preset number for few seconds with releasing mute, and then searches again.
In FM band, FM 1,FM 2 and FM 3 is checked one at a time When long pressing
the APS or A/P button (more than 1 second), the radio searches from the current
frequency and checks the signal strength level until 1 cycle search is finished.
And then 6 strongest stations are preset to the corresponding preset number.
The AS operation is implemented in the each band of selected band. When the
AS operation is finished, the radio executes the preset scan.
13. MU BUTTON
Press it to mute down sound. Press it again to release this mode and recover
previous volume level.
14.CLK BUTTON
Press it to change the display to clock display. Press it again to return to previous
display. In clock display, press and hold for about 2 seconds until the hour display
flashes. Rotate VOL +/- button to adjust hours, press CLK button to flash mintue
then rotate VOL +/- button to adjust minutes.
15. PWR BUTTON
Press it to turn on the unit. Press it again to turn off.
16.
17.
BUTTON
Pressing during playback will stop play temporary. Return to normal playback,
once again.
press
/
BUTTON
A. When long pressing the
/
button (more than 2 seconds) during play, the
speed of rapid forward/reverse changes according to the disc as follow.
DVD/VCD/CD/MP3:
Normal Playback
2X
4X
6X
8X
B. Shortly press the
one track.
/
button during playback to skip to next track or back
Note: For some VCD2.0 discs (PBC-playback control),
be unavailable.
and
buttons may
C. Press UP or DN button on the remote controller or
/
on the front panel to
manually tune up or down for your desired station. Press them hold for more
than 2 seconds to automatically tune up or down for the stronger station.
12
BASIC OPERATION
18. MOD BUTTON
Press it repeatedlyselectDISC,AUXIN,RADIOmode.InUSB playing , you can
press the stop button to stop playing , then press GOTO button to display the DVD
dire and USB dev on the screen, press UP/DN button to select the DVD dire to select
the DVD mode , then playing the DVD disc.
19. EJECT BUTTON
In CDP playing, press the eject button to eject the disc form the disc slot. If in USB
playing , you must change the mode to the DVD mode to eject the disc, otherwise,
you cannot eject the disc from the disc slot.
20. FLASHING LED
If the front panel is not on the main unit, LED will be flashing.
21. RESETBUTTON
RESETbuttonisplacedonthe housing and must be activated with either a ballpoint
penorthinmetal object. TheRESETbuttonistobeactivatedforthefollowing
reasons:
-Initial installation of the unit when all wiring is completed.
-All the function buttons do not operate.
-Error symbol on the display.
Note: If press RESET button, the unit can’t work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the socket on the back of the front panel.
22. ST BUTTON
Press ST button to select stereo or mono reception for radio stations.
MP3 DISC PLAY
1. MP3 disc is playing as the format of FOLDER by FOLDER.
For example:
MP3 PLAYER
ROOT
ROOT
MP3 MUSIC
SKY
0
1
MP3 HEAR YOUR
Use///toselecttheitemorfolder,thenpressENTERbutton.
PressingREPEAT button repeatedly can select three kinds of repeat play mode.
2. REP-ONE:
Playthesamesongover and overagain.
3. FOLDERREPEAT:
Playallsongsinthe currentdirectoryinsequence,over andover again.
4. DISCREPEAT:
Play all songs in the disc over and over again.
In the playback, use
When long pressing the
or
to skip an item ahead or back.
to fast rapid forward/reverse.
/
Note: The FOLDER cannot be selected during playing. It can be selected after
(Stop) button pressed.
13
BASIC OPERATION
c.PressOSDDfor thethirdtime:
OUSBocpeerationac
A.ConnecttheUSBappliancetothe
CHAPTER ELAPSED
USB port of the unit properly, when
00:20:15
the USB appliance connect to the
unit, the system starts playing track
of the USB appliance automatically.
d. Press OSD for the fourth time:
B. Press the
/
button to skip to
CHAPTER REMAIN
the next track or skip to the back one
00:10:25
track. Press the
/
button to fast
forward or fast reverse.
e. Press OSD for the fifth time:
C. In USB playing, you can press the
cursor button to select the item.
The message on the screen will be
cleared.
Then press ENTER button to play.
B. Example for VCD/SVCD/CD:
Also press numeric button to play the
corresponding track directly. Press
a. Press OSD for the first time:
the repeat button to select repeat
play mode.
SINGLE ELAPSED
D. In USB mode, you cannot take out of
00:00:25
the disc from the disc compartment.
You press the stop button then press
theGOTObuttonandbutton to
/
b. Press OSD for the second time:
select the mode between DISC and
USB. You can press the eject button
SINGLE REMAIN
00:04:25
to eject the disc while selected DISC
MODE.
c. Press OSD for the third time:
On-Screen Display Function
Press the OSD button during playback
TOTAL ELAPSED
00:10:25
to display the contents of the current
disc on the screen.
d. Press OSD for the fourth time:
A. Example for DVD:
a. Press OSD for the first time:
TOTAL REMAIN
00:55:25
TITLE 01/03 CHAPTER 002/025
e. Press OSD for the fifth time:
The message on the screen will be
cleared for SVCD and VCD.
00:11:25
Title Number, Total Title Number,
Chapter Number, Total Chapter
Number of this Title of the disc
C. Example for MP3:
Each time OSD is pressed, the
message displayed on screen
changesas follows:
currently being played willbe shown
onthescreen,along with the elapsed
time.
CHAPTER ELAPSED
OFF
CHAPTER REMAIN
b. Press OSD for the second time:
TITLE REMAIN
01:20:25
14
BASIC OPERATION
Multi-angle Function (For DVD only)
Press ANGLE during playback. Each time
the button is pressed, number of the angle
changes in sequential order.
Notes: The angle number is different
according to the disc.The function only
work for discs having scenes recorded at
different angles. When no different angle
are recorded, will be displayed at screen
left top corner.
Multi-audio Language Function
A. DVD: Press AUDIO during playback.
Each time the button is pressed,
number of the audio soundtrack
language changes on sequential order.
Notes: The language number is
different according to the disc. Some
disc only contain one language
soundtrack. When no different
language soundtrack are recorded,
will be displayed at screen left top
corner.
B. VCD/CD: Press AUDIO during
playback. It is possible to switch the
sound between monaural and stereo
sMoOuNnOd.LEFT
MONO RIGHT STEREO
TITLE Menu Function
A. DVD: If the DVD has multiple titles
recorded on the disc. It can select
preferred title from the title menu to
start playback.
a.Press TITLE during playback. The
title menu is display.
b.Press the cursor button shown in TV
screen, select preferred title by the
cursor button and confirmed by
ENTER key.
B. VCD: Press MENU button while
the disc is playing, you can switch
between "PBC on"and "PBC off" mode.
Multi-subtitle Language Function
(For DVD only)
Press SUBTITLE during playback. Each
time the button is pressed, number of the
subtitle language changes in sequential
order.
Notes: The language number is different
according to the disc. Some discs only
contain one subtitle language. When no
different subtitle language are recorded,
will be displayed at screen left top
corner.
15
SETUP
INITIAL SETUP
GENERAL SETUP
--- MAIN PAGE---
--- GENERAL PAGE ---
GENERAL SETUP
SPEAKER SETUP
AUDIO SETUP
TV DISPLAY
PIC MODE
NORMAL/PS
NORMAL/LB
WIDE
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
PREFERENCES
EXIT SETUP
1. Press SETUP in the stop mode.
(Press the stop button twice to ensure
the player under STOP mode.)
MAIN PAGE
TV Screen
2. The initial SETUP menu is displayed.
3. Select the preferred item by using the
4:3
Wide (16:9)
Video Material
Normal
Pan Scan
Letter-box
4:3
/
buttons.
16:9
4. Press ENTER buttons.
A. GENERAL SETUP
This setup page includes all the
item of TV display & audio output
feature. The detail please refer to
GENERAL SETUP MENU.
1. TV DISPLAY SETUP
This is to select the appropriate TV
aspect (4:3 or 16:9) according to the
connected TV set.
B. SPEAKER SETUP
Normal/PS (For 4:3 TV)
This is to activate the audio output
from DOLBY AC3 5.1 DOWNMIX
to 2 channel mode. Please refer to
SPEAKER SETUP MENU.
Played back in the PAN & SCAN style.
(If connected to wide-screen TV, the
left and right edges are cut off.)
Normal/LB (For 4:3 TV)
C. AUDIO SETUP
Played back in letterbox style.
(If connected to wide-screen TV, black
bands appear at top and bottom of
the screen.)
This setup page includes all the
items for AUDIO. Please refer to
AUDIO SETUP MENU.
D. PREFERENCE SETUP
Wide (For 16:9 TV)
Select when a wide-screen TV set is
connected.
This setup page includes all the
configuration of support feature.
The detail please refer to
PREFERENCES SETUP MENU.
16
SETUP
--- GENERAL PAGE ---
--- GENERAL PAGE ---
TV DISPLAY
TV DISPLAY
PIC MODE
AUTO
PIC MODE
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
HI-RES
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
N-FLICKER
ENGLISH
FRENCH
GERMAN
ITALIAN
SPANISH
MAIN PAGE
MAIN PAGE
2. PIC MODE SETUP
4. OSD LANG TYPE SETUP
Select AUTO, the player PIC mode will
depend on DVD disc.
Select the preferred OSD language by
using the
/
buttons.
Select HI-RES format for best image
resolution.
Select N-FLICKER format on format
on image or picture under noise affect.
--- GENERAL PAGE ---
--- GENERAL PAGE ---
TV DISPLAY
TV DISPLAY
PIC MODE
PIC MODE
ANGLE MARK
OSD LANG
CAPTIONS
ON
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
OFF
ON
SCR SAVER
OFF
MAIN PAGE
MAIN PAGE
3. ANGLE MARK DISPLAY SETUP
5. CAPTIONS SETUP
If it is set to ON, when the multi-angle
Activate the CAPTIONS feature by
selecting ON. And release this feature
by selecting OFF.
DVD disc is playing,
(the angle
mark) will appear on the screen; if it
is set to OFF, the mark will not appear.
17
SETUP
--- GENERAL PAGE ---
AUDIO SETUP
--- AUDIO SETUP ---
TV DISPLAY
PIC MODE
AUDIO OUT
OP MODE
ANALOG
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
SPDIF/RAW
SPDIF/PCM
DYNAMIC
LPCM OUTPUT
ON
OFF
MAIN PAGE
6. SCR SAVER SETUP
Select the SCR SAVER output ON/OFF.
MAIN PAGE
1. AUDIO OUT
SPEAKER SETUP
This is to activate the audio output
from ANALOG mode to SPDIF/RAW
mode to SPDIF/PCM mode.
--- SPEAKER SETUP PAGE ---
DOWNMIX
LT/RT
--- AUDIO SETUP ---
AUDIO OUT
STEREO
MAIN PAGE
OP MODE
LINE OUT
DYNAMIC
RF REMOD
LPCM OUTPUT
This is to activate the audio output from
DOLBY AC3 5.1 DOWNMIX to 2 channel
mode. Select the preferred SPEAKER
connection by using the cursor buttons.
- Select the LT/RT to activate the Dolby
surround compatible output.
MAIN PAGE
2. OP MODE
There are two operating modes for the
Dolby Digital decoder: LINE OUT and
RF REMOD.
- Select the STEREO to activate simple
stereo mode.
18
SETUP
--- AUDIO SETUP ---
PREFERENCES SETUP
--- PREFERENCES PAGE ---
AUDIO OUT
TV TYPE
AUTO
NTSC
PAL
FULL
6/8
OP MODE
AUDIO
DYNAMIC
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
MAIN PAGE
4/8
LPCM OUTPUT
2/8
OFF
MAIN PAGE
1. TV TYPE SETUP
3.DYNAMIC RANGE CONTROL
Select DRC and adjust the dynamic
range of a Dobly Digital encoded
program. There are 8 steps between
full compression and off compression.
This player can play discs recorded in
either PAL or NTSC format.
Select NTSC format, when you
connected to NTSC TV.
Select PAL format, when you
connected to PAL TV.
--- AUDIO SETUP ---
Select AUTO format, the player TV
output format will according to the
DVD disc format.
AUDIO OUT
OP MODE
DYNAMIC
--- PREFERENCES PAGE ---
TV TYPE
LPCM OUTPUT
LPCM 48K
LPCM 96K
AUDIO
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
GERMAN
ITALIAN
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
MAIN PAGE
MAIN PAGE
4.LPCM OUTPUT
Select the LPCM OUTPUT between
LPCM 48K and LPCM 96K.
2. AUDIO LANGUAGE SETUP
Select the preferred AUDIO sound-
track by using the cursor buttons.
19
SETUP
--- PREFERENCES PAGE ---
--- PREFERENCES PAGE ---
TV TYPE
TV TYPE
1 G
AUDIO
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
GERMAN
ITALIAN
AUDIO
2
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
MAIN PAGE
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
MAIN PAGE
3 PG
4 PG 13
5
6 PG-R
7 NC-17
8 ADULT
NO_PARENTAL
OFF
3. SUBTITLE LANGUAGE SETUP
Select the preferred SUBTITLE
5. PARENTAL
Select suitable parental guidance by
the cursor buttons and confirmed by
pressing ENTER button.
language by using the cursor buttons.
--- PREFERENCES PAGE ---
--- PREFERENCES PAGE ---
TV TYPE
AUDIO
TV TYPE
AUDIO
SUBTITLE
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
GERMAN
ITALIAN
SUBTITLE
DISC MENU
PARENTAL
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
MAIN PAGE
PASSWORD
DEFAULTS
SMART NAV
MAIN PAGE
CHANGE
4. DISC MENU LANGUAGE SETUP
Select the preferred DISC MENU
language by using the cursor buttons.
6. PASSWORD
Select the change and press ENTER
button. Type the old password (The
initial factory code is 3308) and key
in 4 characters password now you
want to use, and retype again to
confirm key in correctly.
20
SETUP
--- PREFERENCES PAGE ---
DEFAULTS TABLE
TV TYPE
General Setup TV Display
PIC Mode
Normal/PS
AUTO
AUDIO
Angle Mark ON
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
MAIN PAGE
OSD Language English
Captions
ON
SCR Saver ON
Speaker Setup Downmix
Stereo
Audio Setup Audio Out
OP Mode
Analog
Line Out
RESET
Dynamic
LPCM Out
LPCM 96K
AUTO
Preferences TV Type
Audio
7. DEFAULTS
English
English
Select reset to become factory initial
setting.
Subtitle
DISC Menu English
Parental
NO PARENTAL
3308
--- PREFERENCES PAGE ---
Password
Smart Nav
With Menu
TV TYPE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
MAIN PAGE
NO MENU
WITH MENU
8. SMART NAV
In this item, you can select NO MENU
mode or WITH MENU mode.
21
SPECIFICATIONS
Supply voltage
Current consumption
Signal system
:
:
:
:
12V DC (11V-15V)
Less than 10A
Compositive video 1.0Vp-p 75Ω
(1) DVD-VIDEO disc
Discs played
5”(12 cm) single-sided, single-layer
5”(12 cm) single-sided, double-layer
(2) Compact disc (CD-DA,VIEDO CD)
5”(12 cm) disc
Audio Signal Output
Characteristics
:
:
2ch & 4ch line out
(1) Frequency Response:
(2) S/N Ratio:
20 Hz-20 kHz
90 dB (JIS)
(3) Wow and Flutter:
Below measurable limits
For 3 Bands
(Europe)
FM
For 2 Bands
For 2 Bands
(U.S.A.)
FM
(Europe)
FM
Frequency Coverage
IF
: 87.5 to 108 MHz 87.5 to 108 MHz 87.5 to 107.9 MHz
: 10.7 MHz
Sensitivity (S/N = 30 dB) : 15 dBu
10.7 MHz
15 dBu
10.7 MHz
15 dBu
MW
MW
AM
Frequency Coverage
IF
: 522 to 1620 KHz 522 to 1620 KHz 530 to 1710 KHz
: 450 KHz
Sensitivity (S/N = 20 dB) : 40 dBu
450 KHz
40 dBu
450 KHz
40 dBu
LW
Frequency Coverage
IF
: 144 to 290 KHz
: 450 KHz
Sensitivity (S/N = 20 dB) : 45 dBu
Note:
Specifications and design are subject to modification, without notice, due to improvements
in technology.
22
TROUBLE SHOOTING
Before going through the check list, check wiring connection. If any of the problems
persist after check list has been made, consult your nearest service dealer.
Symptom
No power.
Cause
Solution
The car ignition switch is
not on.
If the power supply is properly
connected to the car accessory
terminal, switch the ignition key
to “ACC“.
The fuse is blown.
Replace the fuse.
Disc cannot be Presence of disc inside the
Remove the disc in the player,
Then put a new one
loaded or
ejected.
player
Inserting the disc in reverse
direction.
Insert the compact disc with
the label facing upward.
The disc is extremely dirty or
defective
Clean the disc or try to play a
new one.
Temperature inside the car
is too high.
Cool off or until the ambient
temperature return to normal.
Condensation.
Leave the player off for an hour
then try again.
No sound.
Volume is in minimum.
Adjust volume to a desired level.
Check wiring connection.
Wiring is not properly
connected.
Sound skips.
The installation angle is
more than 30 degrees.
Adjust the installation angle less
than 30 degrees.
The disc is extremely dirty
or defective disc.
Clean the compact disc, then
try to play a new one.
The operation
keys do not
work.
The built-in microcomputer
is not operating properly
due to noise.
Press the RESET button.
Front panel is not properly
fixed into its place.
The radio does The antenna cable is not
Insert the antenna cable firmly.
notwork.
connected.
The signals are too weak.
Select a station manually.
This product incorporates copyright protection technology that is protected by method
claims of certain U.S. patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners.Use of this copyright protection
technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
88-V3470-01
23
|