Pelco Home Security System c1964m b6 02 User Manual

C1964M-B (6/02)  
VIDEO4X4  
Video Security System  
®
3500 Pelco Way  
Clovis, CA 93612-5699  
USA  
IMPORTANT  
Only use the installation methods illustrated in this manual to properly install the  
VIDEO4X4 or VIDEO4X4PLUS system. Do not refer to the installation methods illus-  
trated in the manuals supplied with the components (DVR, monitor, and cameras).  
Refer to component manuals for operating instructions only.  
In North America & Canada:  
Tel (800) 289-9100  
FAX (800) 289-9150  
International Customers:  
Tel +1(559) 292-1981  
FAX +1(559) 348-1120  
DESCRIPTION  
Pelco’s VIDEO4X4 is an all-in-one video security system. The system includes a digital video  
recorder, quad monitor, and four cameras with mounts.  
Models  
VIDEO4X4  
Four-channel digital video recorder, 30 GB hard drive for video storage,  
120 VAC, NTSC  
VIDEO4X4PLUS Four-channel digital video recorder, 60 GB hard drive for video storage,  
120 VAC, NTSC  
INSTALLATION  
There are two methods of installation for the system; full screen playback and quad view play-  
back. Refer to Figures 1 and 2. Select the desired configuration for your installation. Make all  
equipment connections as illustrated in the drawing.  
Pelco Manual C1964M-B (6/02)  
1
 
QUAD VIEW PLAYBACK  
Images Per Second:  
With preview – up to 15 fps  
Without preview – up to 30 fps  
Record Time:  
8 weeks (1 fps) with 30 GB hard drive  
16 weeks (1 fps) with 60 GB hard drive  
Playback Mode:  
Quad view, only  
To setup the VIDEO4X4 for quad view playback refer to Figure 2 and do the following:  
1. Connect cameras to the S-Video inputs located on the back of the monitor. Video cables  
are supplied with the cameras. Set CH (camera) input switches to 75.  
2. Use a BNC cable (supplied) and connect MONITOR OUT located on the back of the  
monitor to the CAMERA 3 INPUT of the recorder. Set the MONITOR OUT switch to 75.  
3. Connect the recorder’s MONITOR OUTPUT to the VIDEO IN located on the back of the  
monitor. Use the supplied BNC/RCA adapter to connect the BNC cable to the VIDEO IN  
input.  
4. Program the VIDEO4X4 system:  
a. Set the monitor to VCR mode.  
b.  
Program the DX1004 recorder:  
(1.) Set Camera operation for cameras 1, 2 and 4 to OFF.  
(2.) Set Camera operation for camera 3 to ON.  
(3.) Set the Preview Function.  
(4.) Select the resolution for Camera 3.  
(5.) Program fps for Camera 3.  
Refer to the manuals supplied with the monitor and recorder for programming instructions.  
VIDEO IN  
NOTE: Set all monitor termina-  
tion switches to 75. Set the  
monitor output switch to HI.  
75  
Hi 75  
Hi 75  
Hi 75  
Hi 75  
Hi  
MAIN  
VIDEO AUDIO  
IN  
IN  
MONITOR  
OUT  
CH 1  
CH 2  
CH 3  
CH 4  
OUT  
IN/OUT  
A/C INLET  
FOCUS  
MONITOR  
REMOTE*  
SCREEN  
CH 1 CH 2 CH 3 CH 4 TRIG  
OUT  
POWER  
ON  
OFF  
AC IN  
INPUT  
OUTPUT  
CAMERA  
MOTOR  
VIDEO PRINTER  
RECORDER  
ALARM  
SENSOR  
NTSC  
PAL  
1
2
3
4
00889  
Figure 2. Quad View Playback  
Pelco Manual C1964M-B (6/02)  
3
 
PROGRAMMING/OPERATION  
For complete programming and operation instructions refer to the installation and operation  
manuals supplied with the digital video recorder, quad monitor, and cameras.  
NOTE: The VIDEO4X4 system cannot record and play back video at the same time. Turn  
the DVR recording mode off before playing back video.  
PRODUCT WARRANTY AND RETURN INFORMATION  
WARRANTY  
Pelco will repair or replace, without charge, any merchandise proved defective in material or  
workmanship for a period of one year after the date of shipment.  
If  
a
warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or  
(559) 292-1981 to obtain a Repair Authorization number (RA), and provide the following  
information:  
1. Model and serial number  
Exceptions to this warranty are as noted below:  
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number  
3. Details of the defect or problem  
Five years on FT/FR8000 Series fiber optic products.  
Three years on Genex® Series products (multiplexers, server, and keyboard).  
If there is a dispute regarding the warranty of a product which does not fall under the  
warranty conditions stated above, please include a written explanation with the product  
when returned.  
Three years on Camclosure® and fixed camera models, except the CC3701H-2,  
CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2, and MC3651H-2X camera models,  
which have a five-year warranty.  
Method of return shipment shall be the same or equal to the method by which the item was  
received by Pelco.  
Two years on standard motorized or fixed focal length lenses.  
Two years on Legacy®, CM6700/CM6800/CM9700 Series matrix, and DF5/DF8 Series  
fixed dome products.  
RETURNS  
In order to expedite parts returned to the factory for repair or credit, please call the factory at  
(800) 289-9100 or (559) 292-1981 to obtain an authorization number (CA number if returned  
for credit, and RA number if returned for repair).  
Two years on Spectra®, Esprit®, ExSite, and PS20 scanners, including when used in  
continuous motion applications.  
Two years on Esprit® and WW5700 Series window wiper (excluding wiper blades).  
All merchandise returned for credit may be subject to a 20% restocking and refurbishing  
charge.  
Eighteen months on DX Series digital video recorders, NVR300 Series network video  
recorders, and EnduraSeries distributed network-based video products.  
Goods returned for repair or credit should be clearly identified with the assigned CA or RA  
number and freight should be prepaid. Ship to the appropriate address below.  
One year (except video heads) on video cassette recorders (VCRs). Video heads will be  
covered for a period of six months.  
If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico, send goods to:  
Six months on all pan and tilts, scanners or preset lenses used in continuous motion  
applications (that is, preset scan, tour and auto scan modes).  
Service Department  
Pelco  
3500 Pelco Way  
Clovis, CA 93612-5699  
Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco  
shipment. All goods requiring warranty repair shall be sent freight prepaid to Pelco, Clovis,  
California. Repairs made necessary by reason of misuse, alteration, normal wear, or accident  
are not covered under this warranty.  
If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico and are  
instructed to return goods to the USA, you may do one of the following:  
If the goods are to be sent by a COURIER SERVICE, send the goods to:  
Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from  
the specific use or application made of the Products. Pelcos liability for any claim, whether  
based on breach of contract, negligence, infringement of any rights of any party or product  
liability, relating to the Products shall not exceed the price paid by the Dealer to Pelco for  
such Products. In no event will Pelco be liable for any special, incidental or consequential  
damages (including loss of use, loss of profit and claims of third parties) however caused,  
whether by the negligence of Pelco or otherwise.  
Pelco  
3500 Pelco Way  
Clovis, CA 93612-5699 USA  
If the goods are to be sent by a FREIGHT FORWARDER, send the goods to:  
Pelco c/o Expeditors  
473 Eccles Avenue  
The above warranty provides the Dealer with specific legal rights. The Dealer may also have  
additional rights, which are subject to variation from state to state.  
South San Francisco, CA 94080 USA  
Phone: 650-737-1700  
Fax: 650-737-0933  
REVISION HISTORY  
Manual # Date  
Comments  
C1964M  
6/01  
6/01  
6/02  
Original version.  
C1964M-A  
C1964M-B  
Added programming information. Revised illustrations.  
Revised installation instructions.  
Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco.  
Endura and ExSite are trademarks of Pelco.  
©Copyright 2002, Pelco.  
All rights reserved.  
4
Pelco Manual C1964M-B (6/02)  
 

Philips Marine Instruments BDL6551V User Manual
Philips Portable CD Player AW 7150 14S User Manual
Philips Stereo System SWV2218 User Manual
Philips TV DVD Combo 20DV6942 User Manual
Philips TV Receiver DTR1000 User Manual
Pioneer MP3 Player DEH P6500 User Manual
Pioneer Speaker System HTP 500 User Manual
Planet Technology Digital Camera ICA 601 User Manual
Polk Audio Stereo Amplifier C5001 User Manual
PS Audio Stereo Amplifier GCHA User Manual