C1054M (6/99)
ICIICISS45
Inter-Check® Interface Cable
®
DESCRIPTION
300 W. Pontiac Way,
Clovis, CA 93612-5699
USA
The ICIICISS45 Inter-Check® interface cable is designed to connect an ICL/Fujitsu ISS45 sys-
tem terminal to the Inter-Check® ICI1000S Series video text inserter. The interface cable con-
sists of a printed circuit board, two DB25 connectors (male and female), and a 6-foot (1.8 m)
data cable with an RJ-14 connector.
In North America & Canada:
Tel (800) 289-9100
FAX (800) 289-9150
DataFAX (800) 289-9108
INSTALLATION
The following items are supplied:
International Customers:
Tel (1-559) 292-1981
FAX (1-559) 348-1120
DataFAX (1-559) 292-0435
1
1
1
ICIICISS45 Inter-Check® interface cable
CN17-0111-0002 adapter, 25-pin (F) to 9-pin (M)
CN17-0211-0001 adapter, 25-pin (M) to 9-pin (F)
Pelco Online
Refer to Figure 1.
1. Turn off power to the ISS45 terminal.
2. If the ISS45 terminal is equipped with a customer pole display, unplug the cable connec-
tor from port 3.
3. Plug the CN17-0111-0002 adapter (supplied) into the 9-pin port 3 of the ISS45 terminal.
4. Set the SW1 switch on the ICIICISS45 interface cable in the position toward the gray data
cable.
5. Plug the ICIICISS45 interface cable connector into the CN17-0111-0002 adapter socket.
If the ISS45 terminal is equipped with a customer pole display, go to step 6; if not, go to
step 8.
6. Plug the CN17-0211-0001 adapter (supplied) into the ICIICISS45 interface cable socket
(if the ISS45 terminal is equipped with a customer pole display).
7. Plug the customer pole display (if equipped) cable connector into the CN17-0211-0001
adapter.
NOTE: Both RJ-14 receptacles
in the ICI1000WK wiring kit (sup-
plied with the ICI1000S) must be
connected at the black and yel-
low terminals with 18 AWG two-
conductor shielded cable (refer to
the ICI1000S manual).
8. Plug the ICIICISS45 data cable RJ-14 connector into the DATA IN receptacle of the
ICI1000S video text inserter or into the ICI1000WK wiring kit receptacle.
9. Enable the customer pole display port if not previously being used.
10. Make certain all connections are tight. This completes the ICIICISS45 interface cable in-
stallation. The ISS45 terminal must now be programmed by a qualified technician or
dealer for the following parameters: 9600 baud, 8 bits, and parity off.
ADAPTER
ICIICISS45
ADAPTER
CUSTOMER POLE
DISPLAY CABLE
TERMINAL
PORT 3
SW1
SWITCH
DATA CABLE
TO ICI1000S
Figure 1. ICIICISS45 Inter-Check® Interface Cable
SPECIFICATIONS
Environment:
Indoor
Operating
Temperature:
32° to 120°F (0° to 49°C)
Weight:
1.0 lb (0.45 kg)
Connectors:
ICIICISS45 interface cable contains one DB25P connector (plug), one
DB25S connector (socket), and one RJ-14 connector
Additional connectors supplied with the interface cable:
One CN17-0111-0002 adapter 25-pin (F) to 9-pin (M)
One CN17-0211-0001 adapter 25-pin (M) to 9-pin (F)
WARRANTY AND RETURN INFORMATION
WARRANTY
Pelco will repair or replace, without charge, any merchandise proved defec-
tive in material or workmanship for a period of one year after the date of
shipment. Exceptions to this warranty are as noted below:
If a warranty repair is required, the Dealer must contact Pelco at (800) 289-
9100 or (559) 292-1981 to obtain a Repair Authorization number (RA), and
provide the following information:
•
•
•
Three years on Genex™ Series (multiplexers, server, and keyboard).
Two years on all standard motorized and fixed focal length lenses.
Two years on Esprit™, Legacy®, Intercept®, PV1000 Series, CM6700/
CM8500/CM9500/CM9750/CM9760 Matrix, Spectra®, DF5 Series and DF8
Fixed Dome products.
Two years on WW5700 series window wiper (excluding wiper blades).
Two years on cameras.
Six months on all pan and tilts, scanners or preset lenses used in continuous
motion applications (that is, preset scan, tour and auto scan modes).
1. Model and serial number
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number
3. Details of the defect or problem
If there is a dispute regarding the warranty of a product which does not fall
under the warranty conditions stated above, please include a written expla-
nation with the product when returned.
•
•
•
Ship freight prepaid to:
Pelco
300 West Pontiac Way
Clovis, CA 93612-5699
Pelco will warrant all replacement parts and repairs for 90 days from the date
of Pelco shipment. All goods requiring warranty repair shall be sent freight
prepaid to Pelco, Clovis, California. Repairs made necessary by reason of
misuse, alteration, normal wear, or accident are not covered under this war-
ranty.
Method of return shipment shall be the same or equal to the method by which
the item was received by Pelco.
RETURNS
Pelco assumes no risk and shall be subject to no liability for damages or loss
resulting from the specific use or application made of the Products. Pelco’s
liability for any claim, whether based on breach of contract, negligence, in-
fringement of any rights of any party or product liability, relating to the Prod-
ucts shall not exceed the price paid by the Dealer to Pelco for such Products.
In no event will Pelco be liable for any special, incidental or consequential
damages (including loss of use, loss of profit and claims of third parties) how-
ever caused, whether by the negligence of Pelco or otherwise.
In order to expedite parts returned to the factory for repair or credit, please
call the factory at (800) 289-9100 or (559) 292-1981 to obtain an authoriza-
tion number (CA number if returned for credit, and RA number if returned for
repair). Goods returned for repair or credit should be clearly identified with
the assigned CA/RA number and freight should be prepaid. All merchandise
returned for credit may be subject to a 20% restocking and refurbishing charge.
Ship freight prepaid to:
Pelco
The above warranty provides the Dealer with specific legal rights. The Dealer may
also have additional rights, which are subject to variation from state to state.
300 West Pontiac Way
Clovis, CA 93612-5699
REVISION HISTORY
Manual # Date
C1054M 6/99
Comments
Original version.
®Pelco and the Pelco logo are registered trademarks of Pelco.
© Copyright 1999, Pelco. All rights reserved.
|