MCD716
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
Remote control with two
AAA batteries
CompositeVideo Cable
Control Cable
(yellow)
Quick S1tart Guide
2
User Manual
FM antenna
Quick start guide
User manual
Setting the clock
1
In standby mode, press and hold CLOCK on the remote.
2
When the hour digits flash,turn VOLUME-/+ on the system or press VOL +/- on the
remote to set the hours.
3
Press CLOCK again and the minute digits flash.Then turn VOLUME-/+ on the system or
press VOL +/- on the remote to set the minutes.
4
Press CLOCK again to confirm the time setting.
Setting DVD menu options
IMPORTANT!
If the progressive scan feature is activated but the connectedTV does not support
progressive signals or the cables are not connected accordingly, see the user
manual for proper progressive scan setup or deactivate the progressive scan
feature as below:
1)Turn off yourTV progressive scan mode or turn on to interlaced mode.
2) Press SYSTEM MENU on the remote to exit the system menu and then DISC
and “1”to exit progressive scan.
DIGITAL AUDIO SETUP
3D PROCESSING
DIVX (R) VOD
PICTURE SETTING
Tip
See chapters "Getting Started" and "System Menu Options" in the
User Manual for detailed descriptions.
Playing a disc
1
Press OPEN •CLOSEç (ç on the remote control) to open the disc tray and load in a
disc, then press the same button again to close the disc tray.
➜ Make sure the label side of the disc is facing up.
OPEN•CLOSE
2
Playback will start automatically. If not pressÉÅ.
3
To stop playback, press PRESET-/9 (9 on the remote).
Programming and tuning to radio stations
1
Press SOURCE (TUNER on the remote) to select tuner source.
2
Press PROGRAM on the remote for more than two seconds to program all available
stations in order of waveband.
3
Press PRESET+/- (¡ / ™ on the remote) until the desired preset station is displayed.
Playing a USB mass storage device
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players (USB 2.0 or USB1.1), memory cards (requires an additional card reader to
work with this Hi-Fi system).
1
Insert the USB device’s USB plug into the socket
on the set.
2
Press SOURCE once or more (or USB on the remote control) to select USB.
3
Play the USB’s audio files as you do with the albums/tracks on a CD,
Notes for remote control:
First, select the source you wish to control by
pressing one of the source select keys on the remote
control (DISC orTUNER, for example).
Tip
–
Detailed playback features and
additional functions are described in the
accompany owner's manual.
–
Then select the desired function ( 2;, í, ë for
example).
PDCC-JS/JW-0845
|