Register your
and get support at
BDP5510
BDP5510
EN User manual
1
(
)
HDMI OUT
FOR VOD/BD-LIVE ONL
Y
HDMI OUT
UDIO LINE OUT
3
2
1 HDMI
ꢀHDMI ꢁVIDEO ꢁCOAXIAL ꢁAUDIO LINE OUT
HDMI OUT
2 VIDEO+AUDIO LINE OUT
ꢁHDMI ꢀVIDEO ꢁCOAXIAL ꢀAUDIO LINE OUT
AUDIO LINE OUT
VIDEO
4
3 COAXIAL
ꢁHDMI ꢁVIDEO ꢀCOAXIAL ꢁAUDIO LINE OUT
COAXIAL
4 AUDIO LINE OUT
ꢁHDMI ꢁVIDEO ꢁCOAXIAL ꢀAUDIO LINE OUT
AUDIO LINE OUT
5
3
4
5
1
2
SOURCE
TV
6
6
2
BD/BD 3D
1
DVD/VCD/CD
DivX Plus HD/MKV
MP3 / JPEG
3
4
USB
1
2
3
7
Contents
1 Hookup and play
2-7
2
Use your Blu-ray disc/ DVD player 10
Basic play control
10
11
12
12
12
13
13
13
14
14
15
15
16
16
17
Video, audio and picture options
DivX videos
Play a musical slideshow
BonusView on Blu-ray
BD-Live on Blu-ray
Play a Blu-ray 3D video
View 2D video/picure in 3D effect
Set up a network
Smartphone control
Browse PC through DLNA
Browse NetTV
Rent online videos
Use a USB keyboard or mouse
Use Philips EasyLink
Stream media from an Android device 17
3 Change settings
Picture
18
18
18
19
Sound
Network (installation, NetTV...)
Preference (languages, parental
control...)
19
20
Advanced options (clear memory...)
4 Update software
20
20
20
Update software via the Internet
Update software via USB
ꢀꢁ ꢂꢃꢄꢅꢆ\ꢅꢇꢈꢆꢉꢊꢋꢁꢁꢁ
6 Troubleshooting
21
22
EN
9
During play, press the following buttons to
control.
2
Use your Blu-ray
disc/ DVD player
Button
Action
Turn on the player, or switch to
standby.
Congratulations on your purchase, and
ꢘꢆꢈꢅꢂꢉꢆꢇꢏꢂꢇꢙꢐꢍꢈꢍꢀꢎꢚꢇꢛꢂꢇꢕꢄꢈꢈꢗꢇꢔꢆꢋꢆ\ꢏꢇꢕꢁꢂꢉꢇ
the support that Philips offers (e.g. product
software upgrade), register your product at
Access the home menu.
Stop play.
Press and hold (more than 4
seconds) to open or close the
disc compartment.
/
Pause play.
Press repeatedly to slow forward
frame by frame.
Start or resume play.
Skip to the previous or next track,
ꢅꢐꢊꢀꢏꢆꢁꢇꢂꢁꢇ\ꢈꢆꢒ
Fast backward or forward.
Press repeatedly to change the
search speed.
Basic play control
/
/
Press once, and then press
to slow forward.
AUDIO
Select an audio language or
channel.
SUBTITLE Select a subtitle language.
DISC
Access or exit the disc menu.
MENU /
POP-UP
MENU
TOP
MENU
Color
buttons
Access the main menu of a video
disc.
Select tasks or options for Blu-ray
discs.
Navigate the menus.
Press
to rotate a picture
clockwise or counter-clockwise
during slideshow.
OK
ꢜꢂꢋ\ꢁꢉꢇꢊꢇꢎꢆꢈꢆꢅꢏꢍꢂꢋꢇꢂꢁꢇꢆꢋꢏꢁꢗꢒ
Return to a previous display menu.
Access more options during play.
10 EN
#ꢇ [Zoom]: Zoom into a video picture. Press
to select a zoom factor.
#ꢇ [Repeat]: Repeat a chapter or title.
#ꢇ [Repeat A-B]: Mark two points within a
chapter for repeat play, or turn off repeat
mode.
#ꢇ [2D to 3D]: Convert instantly a 2D video
to be viewed in 3D effect.
#ꢇ [Picture settings]"ꢇ#ꢆꢈꢆꢅꢏꢇꢊꢇꢀꢁꢆꢃꢆ\ꢋꢆꢃꢇ
color setting.
Video, audio and picture
options
More options are available for video or picture
play from a disc or USB storage device.
Video options
Note
# Available video options depend on the video source.
2
3
Picture options
1
Access more options during video play.
#ꢇ [Audio language]: Select an audio language.
#ꢇ [Subtitle Language]: Select a subtitle
language.
2
3
#ꢇ [Subtitle shift]: Change the subtitle
position on the screen. Press
change the subtitle position.
#ꢇ [Info]: Display play information.
to
1
#ꢇ [Character set]: Select a character set that
supports the DivX video subtitle (only for
DivX videos).
#ꢇ [Time search]"ꢇ#ꢑꢍꢀꢇꢏꢂꢇꢊꢇꢎꢀꢆꢅꢍ\ꢅꢇꢏꢍꢉꢆꢇ
via the numeric buttons on the remote
control.
#ꢇ [2nd audio language]: Select the second
audio language (only for Blu-ray discs that
support BonusView).
Access more options during slideshow.
#ꢇ [Rotate +90]: Rotate a picture 90 degrees
clockwise.
#ꢇ [Rotate -90]: Rotate a picture 90 degrees
counter-clockwise.
#ꢇ [Zoom]: Zoom into a picture. Press
select a zoom factor.
#ꢇ [Info]: Display picture information.
#ꢇ [Duration per slide]: Set a display interval
for a slideshow.
to
#ꢇ [2nd Subtitle Language]: Select the second
subtitle language (only for Blu-ray discs that
support BonusView).
#ꢇ [Slide animation]: Select a transition effect
for a slideshow.
#ꢇ [Titles]: Select a title.
#ꢇ [Chapters]: Select a chapter.
#ꢇ [Angle list]: Select a camera angle.
#ꢇ [Menus]: Display a disc menu.
#ꢇ [PIP selection]: Display a picture-in-picture
window (only for Blu-ray discs that support
BonusView).
#ꢇ [Picture settings]"ꢇ#ꢆꢈꢆꢅꢏꢇꢊꢇꢀꢁꢆꢃꢆ\ꢋꢆꢃꢇ
color setting.
#ꢇ [Repeat]: Repeat a selected folder.
#ꢇ [2D to 3D]: Convert instantly a 2D picture
to be viewed in 3D effect.
EN 11
[Cyrillic]
Bulgarian, Belorussian, English,
Macedonian, Moldavian,
Russian, Serbian, and
Ukrainian
Audio options
[Greek]
[Baltic]
Greek
Northern Europe
Press
repeatedly to cycle through the
Note
following options.
#ꢇ Repeat the current track.
#ꢇ Repeat all the tracks on the disc or folder.
#ꢇ Play audio tracks in a random loop.
#ꢇ Turn off a repeat mode.
# ꢛꢂꢇꢀꢈꢊꢗꢇ%ꢍꢌ'ꢇ%*+ꢇꢀꢁꢂꢏꢆꢅꢏꢆꢃꢇ\ꢈꢆꢎꢇꢕꢁꢂꢉꢇꢊꢇ;#<ꢇꢎꢏꢂꢁꢊ=ꢆꢇ
device, or an online video store, connect this player to a
TV through HDMI.
# ꢛꢂꢇꢄꢎꢆꢇꢏꢐꢆꢇꢎꢄꢔꢏꢍꢏꢈꢆꢎ?ꢇꢉꢊꢑꢆꢇꢎꢄꢁꢆꢇꢏꢐꢊꢏꢇꢏꢐꢆꢇꢎꢄꢔꢏꢍꢏꢈꢆꢇ\ꢈꢆꢇ
ꢐꢊꢎꢇꢏꢐꢆꢇꢎꢊꢉꢆꢇꢋꢊꢉꢆꢇꢊꢎꢇꢏꢐꢆꢇ%ꢍꢌ'ꢇꢌꢍꢃꢆꢂꢇ\ꢈꢆꢇꢋꢊꢉꢆꢒꢇ@ꢂꢁꢇ
ꢆJꢊꢉꢀꢈꢆ?ꢇꢍꢕꢇꢏꢐꢆꢇ%ꢍꢌ'ꢇꢌꢍꢃꢆꢂꢇ\ꢈꢆꢇꢍꢎꢇꢋꢊꢉꢆꢃꢇPꢉꢂꢌꢍꢆꢒꢊꢌꢍW?ꢇ
ꢎꢊꢌꢆꢇꢏꢐꢆꢇꢎꢄꢔꢏꢍꢏꢈꢆꢇ\ꢈꢆꢇꢊꢎꢇPꢉꢂꢌꢍꢆꢒꢎꢁꢏQ?ꢇꢂꢁꢇPꢉꢂꢌꢍꢆꢒꢎꢄꢔQꢒꢇ
# ꢛꢐꢍꢎꢇꢀꢈꢊꢗꢆꢁꢇꢅꢊꢋꢇꢀꢈꢊꢗꢇꢎꢄꢔꢏꢍꢏꢈꢆꢇ\ꢈꢆꢎꢇꢍꢋꢇꢏꢐꢆꢇꢕꢂꢈꢈꢂꢘꢍꢋ=ꢇ
formats: .srt, .sub, .txt, .ssa, and .smi.
DivX videos
You can play DivX videos from a disc, a USB
storage device, or an online video store (see
"Rent online videos).
Play a musical slideshow
VOD code for DivX
#ꢇ Before you purchase DivX videos and play
them on this player, register this player on
#ꢇ Display the DivXVOD code: press , and
select [Setup] > [Advanced] > [DivX®
VOD Code].
Play music and pictures simultaneously to create
a musical slideshow.
1 From a disc or connected USB storage
ꢃꢆꢌꢍꢅꢆ?ꢇꢀꢈꢊꢗꢇꢊꢇꢉꢄꢎꢍꢅꢇ\ꢈꢆꢒ
2 Press , and go to the picture folder.
3 Select a picture from the same disc or
DivX subtitles
USB, and press OK to start slideshow.
#ꢇ Press SUBTITLE to select a language.
#ꢇ If the subtitle is not displayed correctly,
change the character set that supports the
DivX subtitle. Select a character set: press
, and select [Character set].
4 Press to stop slideshow.
5 Press again to stop music play.
BonusView on Blu-ray
Character set Languages
[Standard]
English,Albanian, Danish,
Dutch, Finnish, French,
View special content (such as commentaries) in
a small screen window.
This feature is only applicable to Blu-ray discs
compatible with BonusView (also known as
picture in picture).
Gaelic, German, Italian,
Kurdish (Latin), Norwegian,
Portuguese, Spanish, Swedish,
andTurkish
1 During play, press
.
[Central
Europe]
Albanian, Croat, Czech, Dutch,
English, German, Hungarian,
Irish, Polish, Romanian, Slovak,
Slovene, and Serbian
» The options menu is displayed.
12 EN
2 Select [PIP selection] > [PIP], and press
OK.
Note
» PIP options [1]/[2] depend on the
video contents.
# BD-Live services vary from discs and countries.
# ꢓꢐꢆꢋꢇꢗꢂꢄꢇꢄꢎꢆꢇ<%^_ꢍꢌꢆ?ꢇꢃꢊꢏꢊꢇꢂꢋꢇꢏꢐꢆꢇꢃꢍꢎꢅꢇꢊꢋꢃꢇꢏꢐꢍꢎꢇꢀꢈꢊꢗꢆꢁꢇ
are accessed by the content provider
» The secondary video window is
# Use a USB storage device or SD card with at least 1GB
of free space to store the download.
displayed.
3 Select [2nd audio language] or [2nd
Subtitle Language], and press OK.
Play a Blu-ray 3D video
BD-Live on Blu-ray
What you need
#ꢇ A 3D compliantTV
#ꢇ This player is connected to theTV through
HDMI
#ꢇ 3D glasses compatible with theTV
1 Make sure that 3D output is turned on:
press , and select [Setup] > [Video]
>[Watch 3D video] > [Auto].
Access exclusive online services, such as movie
trailers, games, ringtones, and other bonus
contents.
This feature is only applicable to Blu-ray discs
that are BD-Live enabled.
1 Prepare the Internet connection and set
up a network (see "Set up a network").
2 Play a Blu-ray 3D video.
2 Connect a USB storage device or SD card
3 Put on the 3D glasses for 3D effects.
#ꢇ To play 3D video in 2D, turn off Blu-ray
3D output (press , and select [Setup]
> [Video] > [Watch 3D video] >
[Off]).
to this player.
#ꢇ A USB storage device or SD card is
used to store the downloaded BD-Live
content.
3 Select a USB storage device or SD card
to store: press , and select [Setup] >
[Advanced] > [Local storage].
View 2D video/picure in 3D
effect
#ꢇ To delete the BD-Live previously
downloaded on the USB storage
device or SD card for memory
release, press , and select [Setup] >
[Advanced] > [Clear memory].
You can convert 2D videos or pictures to be
viewed in 3D effect.
4 Play a disc that is BD-Live enabled.
What you need
5 On the disc menu, select the BD-Live icon,
#ꢇ A 3D compliantTV
and press OK.
#ꢇ This player is connected to theTV through
HDMI
#ꢇ 3D glasses compatible with theTV
» BD-Live starts to load.The loading
time depends on the disc and the
Internet connection.
1 Play 2D video or pictures on this player.
6 On the BD-Live interface, select an item
2 Press
.
to access.
» The options menu is displayed.
3 Select [2D to 3D] > [On].
» 2D video or pictures are converted to
3D effect.
EN 13
4 Put on the 3D glasses for 3D effects.
#ꢇ ꢛꢐꢍꢎꢇꢀꢈꢊꢗꢆꢁꢇꢐꢊꢎꢇꢊꢇꢔꢄꢍꢈꢏ^ꢍꢋꢇꢓꢍ^@ꢍꢇꢕꢂꢁꢇꢊꢇ
wireless connection.
Set up a network
Connect this player to a computer network and
the Internet to access the services:
#ꢇ Browse PC (DLNA): play photos, music,
ꢊꢋꢃꢇꢌꢍꢃꢆꢂꢇ\ꢈꢆꢎꢇꢎꢏꢁꢆꢊꢉꢆꢃꢇꢕꢁꢂꢉꢇꢗꢂꢄꢁꢇ
computer.
PC (DLNA)
#ꢇ Browse NetTV: access online services,
such as pictures, music and video stores.
#ꢇ Update software: update the software of
this player via the Internet.
#ꢇ BD-Live: access online bonus features
(applicable to Blu-ray discs that are BD-
Live enabled).
1 Connect this player to a computer
network and the Internet, through wired
(Ethernet) or wireless connection.
#ꢇ For wired connection, connect a
network cable (not supplied) to the
LAN port on the back panel of this
player.
2 Perform the network installation.
1) Press .
2) Select [Setup], and press OK.
3) Select [Network] > [Network
installation], and press OK.
4) Follow the instructions on theTV screen to
complete the installation.
Caution
# Before you connect to a network, familiarize yourself
with the network router, media server software for
DLNA, and networking principles. If necessary, read
documentation accompanying network components.
Philips is not responsible for lost, damaged, or corrupt
data.
PC (DLNA)
Smartphone control
Use a smartphone to browse, control and play
ꢉꢆꢃꢍꢊꢇ\ꢈꢆꢎꢇꢕꢁꢂꢉꢇꢏꢐꢍꢎꢇꢀꢈꢊꢗꢆꢁꢒꢇ
What you need
#ꢇ An iPhone (iOS 3.1.3 and above) or
Android based device (Android 2.1 and
above)
14 EN
#ꢇ On your smartphone, download Philips
MyRemote application
6 Tap the control buttons on the
smartphone to control play.
#ꢇ For iPhone, search for the application
in App Store
#ꢇ To access more control buttons, swipe
the screen to the left or right.
#ꢇ To exit the application, press the home
button on the smartphone.
#ꢇ For Android based device, search for
the application in Android Market
Before you start
#ꢇ Connect this player to a home network
(see "Set up a network").
Browse PC through DLNA
#ꢇ Connect your smartphone to the same
home network (see the user manual of the
smartphone for details).
Through this player, you can stream and play
video, music and photo from a computer on
yourTV.
#ꢇ Turn on this player
Before you start
#ꢇ On your PC, install a DLNA-compliant
ꢉꢆꢃꢍꢊꢇꢎꢆꢁꢌꢆꢁꢇꢊꢀꢀꢈꢍꢅꢊꢏꢍꢂꢋꢇjꢎꢄꢅꢐꢇꢊꢎꢇꢓꢍꢋꢃꢂꢘꢎꢇ
Media Player 11 or higher)
Control your player
Use a smartphone to browse, control and play
ꢉꢆꢃꢍꢊꢇ\ꢈꢆꢎꢇꢕꢁꢂꢉꢇꢏꢐꢍꢎꢇꢀꢈꢊꢗꢆꢁꢒ
#ꢇ `ꢋꢇꢗꢂꢄꢁꢇꢙꢜ?ꢇꢆꢋꢊꢔꢈꢆꢇꢉꢆꢃꢍꢊꢇꢎꢐꢊꢁꢍꢋ=ꢇꢊꢋꢃꢇ\ꢈꢆꢇ
sharing (see the "Help" document in the
media server application)
1 Insert a data disc or USB storage device
into this player.
2 On your smartphone, tap the MyRemote
1 Connect this player and your PC in the
same home network (see "Set up a
network").
icon from the home screen.
» The name of this player is displayed on
the smartphone.
#ꢇ For better video quality, use wired
network connection whenever
possible.
3 Select this player from the smartphone
screen.
2 Press .
» The smartphone used as a virtual
remote control is enabled.
» The home menu is displayed on the
TV screen.
4 On the smartphone, tap the Media
(Media) tab, and then select the disc or
USB source.
3 Select [browse PC], and press OK.
» A content browser is displayed.
» The folders in the data disc or USB
storage device are displayed.
4 #ꢆꢈꢆꢅꢏꢇꢊꢇ\ꢈꢆ?ꢇꢊꢋꢃꢇꢀꢁꢆꢎꢎꢇOK to play.
#ꢇ Use the remote control to control play.
5 `ꢀꢆꢋꢇꢊꢇꢕꢂꢈꢃꢆꢁ?ꢇꢊꢋꢃꢇꢎꢆꢈꢆꢅꢏꢇꢊꢇ\ꢈꢆꢇꢏꢂꢇꢀꢈꢊꢗꢒ
#ꢇ To access the remote control, return
to the previous smartphone screen,
and then tap the Remote (Remote)
tab. Only the relevant control buttons
are enabled.
Browse NetTV
You can access variety of Internet applications
and specially adapted Internet websites.
EN 15
#ꢇ An HDMI connection between this player
and theTV.
#ꢇ An SD memory card of type SDHC Class
6, with at least 8 GB memory.
Note
# Koninklijke Philips Electronics N.V. bears no
responsibility for content provided by NetTV service
providers.
Note
1 Connect this player to the Internet (see
# Use a blank SD card. Formatting a SD card erases any
content on the SD card.
# This service is country dependent.
"Set up a network").
2 Press .
» The home menu is displayed on the
TV screen.
1 Connect this player to the Internet (see
3 Select [browse NetTV], and press OK.
"Set up a network").
4 Follow the onscreen instructions to
2 Insert a blank SD card into the SD CARD
connector located on the rear panel of this
player.
ꢅꢂꢋ\ꢁꢉꢇꢏꢐꢆꢇꢂꢋꢎꢅꢁꢆꢆꢋꢇꢉꢆꢎꢎꢊ=ꢆꢒ
5 Use the remote control to navigate and
select an Internet application.
3 Press .
4 Select [browse NetTV]> Video stores.
Button
Action
5 Select a video store, and follow the
onscreen instructions to rent and watch a
video.
Navigate and select an a
service or item.
OK
ꢜꢂꢋ\ꢁꢉꢇꢊꢇꢎꢆꢈꢆꢅꢏꢍꢂꢋꢒ
Return to a previous page, or
delete input text.
» The video is downloaded to the SD
card.You can watch it now or at any
time within the rental period.
» For the downloaded video on the SD
card, you can watch it only on this
player.
Access options related to a
current activity.
Alphanumeric Input text (such as an email
buttons
address, web URL and
password).
6 Use the remote control to play and
control the video.
TOP MENU
Return to the NetTV home
screen.
To remove the passwords and cookies from
this player, see the section: Change settings >
Network (installation, NetTV...).
Use a USB keyboard or
mouse
For convenience of Internet usage, you can
connect a USB keyboard and/or mouse to type
text and navigate pages on the Internet.
Rent online videos
1 Connect a USB keyboard or mouse to the
USB connector at the rear panel of this
player.
Rent videos from online stores through this
player.
What you need
#ꢇ A high-speed Internet connection to this
player.
#ꢇ If you connect more peripheral USB
devices, connect a USB hub to this
player to make multiple USB ports
available.
16 EN
#ꢇ You also can connect a wireless USB
keyboard or mouse (see the user
manual of the wireless device for
details).
4 Select [On] under the options: [EasyLink],
[OneTouch Play] and [OneTouch
Standby].
» EasyLink function is turned on.
2 Use the keyboard to type text, or the
mouse to navigate web pages.
#ꢇ To change a language for the keyboard,
press , and select
OneTouch Play
ꢓꢐꢆꢋꢇꢗꢂꢄꢇꢀꢈꢊꢗꢇꢊꢇꢃꢍꢎꢅꢇꢂꢋꢇꢏꢐꢍꢎꢇꢀꢈꢊꢗꢆꢁ?ꢇꢏꢐꢆꢇꢛ}ꢇ
automatically switches to the correct video
input source.
[Setup] > [Preference] > [Keyboard
layout].
OneTouch Standby
ꢓꢐꢆꢋꢇꢊꢇꢅꢂꢋꢋꢆꢅꢏꢆꢃꢇꢃꢆꢌꢍꢅꢆꢇjꢕꢂꢁꢇꢆJꢊꢉꢀꢈꢆꢇꢛ}~ꢇ
is put to standby with its own remote control,
this player is put to standby automatically.
Note
# If a USB hub is used with this player, do not overload
the USB hub with many USB devices to avoid
ꢍꢋꢎꢄꢕ\ꢅꢍꢆꢋꢏꢇ;#<ꢇꢀꢂꢘꢆꢁꢒ
Stream media from an
Android device
Use Philips EasyLink
ꢓꢍꢏꢐꢇꢙꢐꢍꢈꢍꢀꢎꢇ#ꢍꢉꢀꢈꢗ#ꢐꢊꢁꢆ?ꢇꢏꢐꢁꢂꢄ=ꢐꢇꢏꢐꢍꢎꢇꢀꢈꢊꢗꢆꢁꢇ
ꢗꢂꢄꢇꢅꢊꢋꢇꢎꢏꢁꢆꢊꢉꢇꢉꢆꢃꢍꢊꢇ\ꢈꢆꢎꢇꢕꢁꢂꢉꢇꢊꢋꢇꢋꢃꢁꢂꢍꢃꢇ
based device on yourTV. For details, visit www.
philips.com/support.
This player supports Philips EasyLink which
uses the HDMI CEC (Consumer Electronics
Control) protocol.You can use a single remote
control to control EasyLink compliant devices
that are connected through HDMI. Philips does
not guarantee 100% interoperability with all
HDMI CEC devices.
1 Connect the HDMI CEC compliant devices
through HDMI, and turn on the HDMI
CEC operations on theTV and other
connected devices (see the user manual of
theTV or other devices for details).
2 Press .
3 Select [Setup]> [EasyLink].
EN 17
#ꢇ [Watch 3D video]: Set to 3D or 2D
output when playing a Blu-ray 3D disc.
The player must be connected to a 3D
TV through HDMI.
3 Change settings
This section helps you change the settings of
this player.
Note
# If you change a setting, make sure that theTV supports
the new setting.
# For settings related to HDMI, theTV must be
1
connected through HDMI.
# For the composite connection (via the VIDEO
connector), select a video resolution of 480i/576i
or 480p/576p under [HDMI video] to enable video
output.
2
Watch 3D video
Sound
3
1 Press .
2 Select [Setup] > [Audio] to access the
audio setup options.
Note
#ꢇ [Night mode]: Select quiet or full
dynamic sound. Night mode decreases
the volume of loud sound and
increases the volume of soft sound
(such as speech).
# You cannot change a menu option that is grayed out.
# To return to the previous menu, press .To exit the
menu, press
.
#ꢇ [Neo 6]: Enable or disable a surround
sound effect which is converted from
2.0 channel audio.
#ꢇ [HDMI Audio]: Set an HDMI audio
format when this player is connected
through HDMI.
#ꢇ [Digital Audio]: Select an audio format
for the sound output when this
player is connected through a digital
connector (coaxial).
Picture
1 Press .
2 Select [Setup] > [Video] to access the
video setup options.
#ꢇ [TV display]: Select a picture display
ꢕꢂꢁꢉꢊꢏꢇꢏꢂꢇ\ꢏꢇꢏꢐꢆꢇꢛ}ꢇꢎꢅꢁꢆꢆꢋꢒ
#ꢇ [PCM Downsampling]: Set the
sampling rate for PCM audio output
when this player is connected through
a digital connector (coaxial).
#ꢇ [HDMI video]: Select an HDMI video
resolution.
#ꢇ [HDMI Deep Color]: Display colors
with more shades and hues when the
video content is recorded in Deep
Color and theTV supports this feature.
#ꢇ [Picture settings]"ꢇ#ꢆꢈꢆꢅꢏꢇꢊꢇꢀꢁꢆꢃꢆ\ꢋꢆꢃꢇ
color setting.
18 EN
#ꢇ [Disc menu]: Select a menu language
for a video disc.
#ꢇ [Parental control]: Restrict access to
discs that are encoded with ratings.
Input "0000" to access the restriction
options.To play all discs irrespective of
the rating, select level "8".
Note
# For settings related to HDMI, theTV must be
connected through HDMI.
# Night mode is only available for Dolby encoded DVD
and Blu-ray discs.
#ꢇ [Screen saver]: Enable or disable
screen saver mode. If enabled, the
screen enters idle mode after 10
minutes of inactivity (for example, in
pause or stop mode).
Network (installation, Net
TV...)
#ꢇ [Auto subtitle shift]: Enable or disable
subtitle shift. If enabled, the subtitle
ꢀꢂꢎꢍꢏꢍꢂꢋꢇꢍꢎꢇꢅꢐꢊꢋ=ꢆꢃꢇꢊꢄꢏꢂꢉꢊꢏꢍꢅꢊꢈꢈꢗꢇꢏꢂꢇ\ꢏꢇ
theTV screen (this feature works with
some PhilipsTVs only).
#ꢇ [Change password]: Set or change
a password to play a restricted disc.
Input "0000" if you do not have a
password or if you have forgotten your
password.
#ꢇ [Display panel]: Change the brightness
of the display panel of the player.
#ꢇ [Auto standby]: Enable or disable
auto standby. If enabled, the player
switches to standby after 30 minutes
of inactivity (for example, in pause or
stop mode).
1 Press .
2 Select [Setup] > [Network] to access the
network setup options.
#ꢇ [Network installation]: Start a wired
or wireless installation to make the
network work.
#ꢇ [View network settings]: Display the
current network status.
#ꢇ [View wireless settings]: Display the
ꢅꢄꢁꢁꢆꢋꢏꢇꢓꢍ^@ꢍꢇꢎꢏꢊꢏꢄꢎꢒꢇ
#ꢇ [Clear NetTV Memory]: Clear the
history of NetTV browser (such as
cookies).
#ꢇ [Name your Product:]: Re-name this
ꢀꢈꢊꢗꢆꢁꢇꢕꢂꢁꢇꢍꢃꢆꢋꢏꢍ\ꢅꢊꢏꢍꢂꢋꢇꢍꢋꢇꢊꢇꢐꢂꢉꢆꢇ
network.
#ꢇ [Fast wake up]: Enable or disable the
player to wake up faster from standby.
If fast wakeup is turned off, less power
is consumed during standby.
#ꢇ [VCD PBC]: Display or skip the
content menu forVCD and SVCD.
Preference (languages,
parental control...)
1 Press .
2 Select [Setup] > [Preference] to access
the preference setup options.
#ꢇ [Menu language]: Select an onscreen
display menu language.
Note
# If your preferred language is not available for disc
language, audio or subtitle, you can select [Others]
from the menu options and input 4-digit language code
which can be found at the back of this user manual.
# If you select a language which is not available on a disc,
this player uses the default language of the disc.
#ꢇ [Keyboard layout]: Select a language
for a connected keyboard.
#ꢇ [Audio]: Select an audio language for
video.
#ꢇ [Subtitle]: Select a subtitle language for
video.
EN 19
4 Update software
Advanced options (clear
memory...)
Before you update the software of this player,
check the current software version:
#ꢇ Press , and then select [Setup] >
[Advanced] > [Version information], and
press OK.
1 Press .
2 Select [Setup] > [Advanced] to access the
advanced setup options.
#ꢇ [BD-Live security]: Restrict or allow
access to BD-Live (only for non-
commercial, user-created BD-Live
discs).
Update software via the
Internet
#ꢇ [Downmix mode]: Select 2-channel
stereo audio output to aTV or to
a receiver with left and right Dolby
surround.
#ꢇ [Software update]: Select to update
software from a network or from USB
storage device.
#ꢇ [Clear memory]: Delete the previous
BD-Live download on the USB storage
device or SD card.A "BUDA" folder is
automatically created to store the BD-
Live download.
#ꢇ [Local storage]: Select a USB storage
device or SD card to store the
ꢃꢂꢘꢋꢈꢂꢊꢃꢆꢃꢇ<%^_ꢍꢌꢆꢇ\ꢈꢆꢎꢒ
1 Connect the player to the Internet (see
"Set up a network").
2 Press , and select [Setup].
3 Select [Advanced] > [Software update]>
[Network].
» If an upgrade media is detected, you
are prompted to start the update.
4 Follow the instructions on theTV screen
to update the software.
» ꢓꢐꢆꢋꢇꢏꢐꢆꢇꢄꢀꢃꢊꢏꢆꢇꢍꢎꢇꢅꢂꢉꢀꢈꢆꢏꢆ?ꢇꢏꢐꢍꢎꢇ
player automatically turns off and on
again.
#ꢇ [DivX® VOD Code]: Display the
DivX® registration code or the
deregistration code for this player.
#ꢇ [Version information]: Display the
software version of this player.
#ꢇ [Restore default settings]: Reset this
player to the default settings made at
the factory, except for password and
parental control level.
Update software via USB
1 Check the latest software version on www.
philips.com/support.
#ꢇ Search for your model and click on
"Software and drivers".
2 Download the software into a USB storage
Note
device.
# You cannot restrict Internet access on commercial
Blu-ray discs.
# Before you purchase DivX videos and play them on this
DivXVOD code.
a Unzip the download, and make sure
that the unzipped folder is named
"UPG_ALL".
b Put the "UPG_ALL" folder in the root
directory.
20 EN
3 Connect the USB storage device to the
5 Specifications
(USB) connector on this player.
4 Press , and select [Setup].
5 Select [Advanced] > [Software update]>
Note
[USB].
# #ꢀꢆꢅꢍ\ꢅꢊꢏꢍꢂꢋꢎꢇꢊꢁꢆꢇꢎꢄꢔ€ꢆꢅꢏꢇꢏꢂꢇꢅꢐꢊꢋ=ꢆꢇꢘꢍꢏꢐꢂꢄꢏꢇꢋꢂꢏꢍꢅꢆ
» If an upgrade media is detected, you
are prompted to start the update.
Region code
6 Follow the instructions on theTV screen
This player can play discs with the following
region codes.
to update the software.
» ꢓꢐꢆꢋꢇꢏꢐꢆꢇꢄꢀꢃꢊꢏꢆꢇꢍꢎꢇꢅꢂꢉꢀꢈꢆꢏꢆ?ꢇꢏꢐꢍꢎꢇ
player automatically turns off and on
again.
DVD
Blu-ray
Countries
Europe, United
Kingdom
B
Caution
# Do not turn off the power or remove the USB storage
device when the software update is in progress because
you might damage this player.
Playable media
#ꢇ BD-Video, BD 3D
#ꢇ %}%^}ꢍꢃꢆꢂ?ꢇ%}%*‚*ꢓ?ꢇ%}%^*‚^*ꢓ?ꢇ
DVD+R/-R DL (Dual Layer)
#ꢇ VCD/SVCD
#ꢇ ꢄꢃꢍꢂꢇꢜ%?ꢇꢜ%^*‚ꢜ%^*ꢓ?ꢇ+ꢙ„ꢇꢉꢆꢃꢍꢊ?ꢇ
ꢓ+ꢇꢉꢆꢃꢍꢊ?ꢇꢝꢙ†‡ꢇ\ꢈꢆꢎ
#ꢇ DivX (Ultra)/DivX Plus HD media, MKV
media
#ꢇ USB storage device
File format
#ꢇ Video: .avi, .divx, .mp4, .mkv, .wmv
#ꢇ Audio: .mp3, .wma, .wav
#ꢇ Picture: .jpg, .gif, .png
Video
#ꢇ Signal system: PAL / NTSC
#ꢇ Composite video output: 1Vp-p (75 ohm)
#ꢇ HDMI output: 480i/576i, 480p/576p, 720p,
1080i, 1080p, 1080p/24Hz
Audio
#ꢇ 2 Channel analog output
#ꢇ Audio Front L&R : 2Vrms (> 1 kohm)
#ꢇ Digital output: 0.5Vp-p (75 ohm)
#ꢇ Coaxial
#ꢇ HDMI output
#ꢇ Sampling frequency:
#ꢇ MP3: 32 kHz, 44.1 kHz, 48 kHz
#ꢇ ꢓ+"ꢇˆˆꢒ‰ꢇꢑŠꢖ?ꢇˆ‹ꢇꢑŠꢖ
EN 21
#ꢇ Constant bit rate:
6 Troubleshooting
#ꢇ MP3: 112 kbps - 320 kpbs
#ꢇ ꢓ+"ꢇˆ‹ꢇꢑꢀꢔꢎꢇ^ꢇ‰Œꢇꢑꢀꢔꢎ
USB
#ꢇ Compatibility: Hi-Speed USB (2.0)
#ꢇ Class support: USB Mass Storage Class
#ꢇ File system: FAT16, FAT32
#ꢇ USB port: 5V , 500mA (for each port)
#ꢇ Support HDD (a portable hard disc drive):
an external power source may be needed.
Warning
# Risk of electric shock. Never remove the casing of the
player.
To keep the warranty valid, never try to repair
the player yourself.
Main unit
If you have problems using this player, check the
following points before you request service. If
you still have a problem, register your player and
If you contact Philips, you will be asked for the
model and serial number of this player.The
model number and serial number are on the
ꢔꢊꢅꢑꢇꢂꢕꢇꢏꢐꢍꢎꢇꢀꢈꢊꢗꢆꢁꢒꢇꢓꢁꢍꢏꢆꢇꢏꢐꢆꢇꢋꢄꢉꢔꢆꢁꢎꢇꢐꢆꢁꢆ"ꢇ
Model No. __________________________
Serial No. ___________________________
#ꢇ Power supply rating:AC 220-240V~, 50 Hz
#ꢇ ꢙꢂꢘꢆꢁꢇꢅꢂꢋꢎꢄꢉꢀꢏꢍꢂꢋ"ꢇꢇꢓ
#ꢇ Power consumption in standby mode (fast
ꢘꢊꢑꢆꢄꢀꢇꢃꢍꢎꢊꢔꢈꢆꢃ~"ꢇꢇꢒ„ꢇꢓ
#ꢇ Dimensions (w x h x d): 435 x 38 x 212.7
(mm)
#ꢇ ‘ꢆꢏꢇꢓꢆꢍ=ꢐꢏ"ꢇ‰ꢒ’„ꢇꢑ=
Accessories supplied
#ꢇ Remote control and 2 AAA batteries
#ꢇ User manual
#ꢇ CD-ROM built in multi-lingual user manual
(Continental Europe only)
Main unit
The buttons on this player do not work.
#ꢇ Disconnect this player from the power
supply for a few minutes, and then
reconnect.
ꢌꢇꢋꢄꢍꢁꢂꢃꢄꢅꢆ\ꢅꢇꢈꢆꢉꢊ
#ꢇ LaserType (Diode):AlGaInN (BD),AlGaInP
(DVD/CD)
#ꢇ ꢓꢊꢌꢆꢇꢈꢆꢋ=ꢏꢐ"ꢇ„Œ‹ꢇ“ꢇˆ‰ꢋꢉꢇj<%~?ꢇ”’ꢇ“ꢇ
664nm (DVD), 784 ~ 796nm (CD)
#ꢇ `ꢄꢏꢀꢄꢏꢇꢀꢂꢘꢆꢁꢇj+ꢊJꢇꢁꢊꢏꢍꢋ=ꢎ~"ꢇꢉꢓꢇj<%~?ꢇ
•ꢉꢓꢇj%}%~?ꢇ•ꢉꢓꢇjꢜ%~
Picture
No picture.
#ꢇ Make sure that theTV is switched to the
correct source input for this player.
#ꢇ For the composite connection (via the
VIDEO connector) to theTV, on this player
select a video resolution of 480i/576i or
480p/576p to enable video output (press
, and select [Setup] > [Video] > [HDMI
video]) .
No picture on HDMI connection.
#ꢇ Make sure that the HDMI cable is not
faulty. If it is faulty, replace with a new
HDMI cable.
22 EN
#ꢇ On the remote control, press and then
ꢀꢁꢆꢎꢎꢇP•„‰Qꢇjꢋꢄꢉꢆꢁꢍꢅꢇꢔꢄꢏꢏꢂꢋꢎ~ꢇꢏꢂꢇꢁꢆꢅꢂꢌꢆꢁꢇ
picture display. Or wait for 10 seconds for
auto recovery.
#ꢇ If this player is connected to an
unauthorized display device with an HDMI
cable, the audio and video signals may not
be output.
Play
Cannot play a disc.
#ꢇ Clean the disc.
#ꢇ Make sure that the disc is correctly loaded.
#ꢇ Make sure that this player supports the
ꢃꢍꢎꢅꢒꢇ#ꢆꢆꢇW#ꢀꢆꢅꢍ\ꢅꢊꢏꢍꢂꢋꢎWꢒ
#ꢇ Make sure that this player supports the
region code of the DVD or BD.
#ꢇ @ꢂꢁꢇ%}%/*ꢓꢇꢂꢁꢇ%}%/*?ꢇꢉꢊꢑꢆꢇꢎꢄꢁꢆꢇꢏꢐꢊꢏꢇ
ꢏꢐꢆꢇꢃꢍꢎꢅꢇꢍꢎꢇ\ꢋꢊꢈꢍꢖꢆꢃꢒ
ꢎꢏꢄꢁꢐꢆꢋꢅꢁꢐꢉꢄꢋꢁꢊꢉꢈꢁꢃꢑꢇꢒꢁꢏꢆꢓꢏꢔꢐꢄ\ꢊꢆꢈꢆꢉꢊꢁꢕꢆꢐꢄꢉꢖ
#ꢇ Make sure that the disc contains high-
ꢃꢆ\ꢋꢍꢏꢍꢂꢋꢇꢌꢍꢃꢆꢂꢒ
#ꢇ Make sure that theTV supports high-
ꢃꢆ\ꢋꢍꢏꢍꢂꢋꢇꢌꢍꢃꢆꢂꢒꢇ
ꢙꢇꢊꢊꢉꢈꢁꢃꢑꢇꢒꢁꢚꢆꢕꢛꢁꢕꢆꢐꢄꢉꢁ\ꢑꢄꢋꢖ
#
#
#
+ꢊꢑꢆꢇꢎꢄꢁꢆꢇꢏꢐꢊꢏꢇꢏꢐꢆꢇ%ꢍꢌ'ꢇꢌꢍꢃꢆꢂꢇ\ꢈꢆꢇꢍꢎꢇ
complete.
+ꢊꢑꢆꢇꢎꢄꢁꢆꢇꢏꢐꢊꢏꢇꢏꢐꢆꢇꢌꢍꢃꢆꢂꢇ\ꢈꢆꢇꢋꢊꢉꢆꢇ
extension is correct.
ꢛꢂꢇꢀꢈꢊꢗꢇ%ꢍꢌ'ꢇ%*+ꢇꢀꢁꢂꢏꢆꢅꢏꢆꢃꢇ\ꢈꢆꢎꢇꢕꢁꢂꢉꢇꢊꢇ
USB storage device or a network, connect
this player to aTV through HDMI.
Sound
No audio output from theTV.
#ꢇ Make sure that the audio cables are
connected to the audio input of theTV.
#ꢇ Make sure that theTV is switched to the
correct source input for this player.
DivX subtitles do not display correctly.
#
+ꢊꢑꢆꢇꢎꢄꢁꢆꢇꢏꢐꢊꢏꢇꢏꢐꢆꢇꢎꢄꢔꢏꢍꢏꢈꢆꢇ\ꢈꢆꢇꢐꢊꢎꢇꢏꢐꢆꢇ
ꢎꢊꢉꢆꢇꢋꢊꢉꢆꢇꢊꢎꢇꢏꢐꢆꢇ%ꢍꢌ'ꢇꢌꢍꢃꢆꢂꢇ\ꢈꢆꢒ
+ꢊꢑꢆꢇꢎꢄꢁꢆꢇꢏꢐꢊꢏꢇꢏꢐꢆꢇꢎꢄꢔꢏꢍꢏꢈꢆꢇ\ꢈꢆꢇꢐꢊꢎꢇꢊꢋꢇ
extension name supported by this player
(.srt, .sub, .txt, .ssa, or .smi).
No audio output from the loudspeakers of
the external audio device (home theater or
ꢇꢗꢃꢑꢆ\ꢄꢍꢘꢖ
#ꢇ Make sure that the audio cables are
connected to the audio input of the audio
device.
#
Cannot read the contents of a connected USB
storage.
#ꢇ Switch the external audio device to the
correct audio source input.
#
Make sure that the format of the USB
storage device is compatible with this
player.
No sound on HDMI connection.
#ꢇ You may not hear any sound from the
HDMI output if the connected device
is non-HDCP compliant or only DVI-
compatible.
#
#
+ꢊꢑꢆꢇꢎꢄꢁꢆꢇꢏꢐꢊꢏꢇꢏꢐꢆꢇ\ꢈꢆꢇꢎꢗꢎꢏꢆꢉꢇꢂꢋꢇꢏꢐꢆꢇ;#<ꢇ
storage device is supported by this player.
For a USB HDD (a portable hard disc
drive), an external power source may be
needed.
No secondary audio output for Picture-in-
Picture feature.
#ꢇ ꢓꢐꢆꢋꢇ[Bitstream] under the [HDMI
Audio] or [Digital Audio] menu is selected,
interactive sound like secondary sound for
Picture-in-Picture feature is muted. De-
select [Bitstream].
'No entry' or 'x' sign is displayed on theTV.
The operation is not possible.
#
EasyLink feature does not work.
#ꢇ Make sure that this player is connected
to the Philips brand EasyLinkTV, and the
EasyLink option is turned on (see "Use
your Blu-ray disc/ DVD player" > "Use
Philips EasyLink").
EN 23
Cannot access BD-Live features.
#ꢇ Make sure that the network installation is
made (see "Use your Blu-ray disc/ DVD
player" > "Set up a network").
#ꢇ Check the router connection (refer to the
user manual for the router).
#ꢇ Make sure that this player is connected to
the network (see "Use your Blu-ray disc/
DVD player" > "Set up a network").
#ꢇ Make sure that the network installation is
made (see "Use your Blu-ray disc/ DVD
player" > "Set up a network").
Browse PC and NetTV work slowly.
#ꢇ Look in your wireless router’s user manual
for information on indoor range, transfer
rate, and other factors of signal quality.
#ꢇ You need a high speed Internet connection
for your router.
#ꢇ Make sure that the Blu-ray disc supports
BD-Live features.
#ꢇ Clear memory storage (see "Change
settings" > "Advanced options (BD-Live
security, clear memory...)").
Cannot download video from an online video
store.
#ꢇ Make sure that this player is connected to
ꢏꢐꢆꢇꢋꢆꢏꢘꢂꢁꢑꢇjꢎꢆꢆꢇP;ꢎꢆꢇꢗꢂꢄꢁꢇ<ꢈꢄ^ꢁꢊꢗꢇꢃꢍꢎꢅ‚ꢇ
%}%ꢇꢀꢈꢊꢗꢆꢁQꢇ˜ꢇP#ꢆꢏꢇꢄꢀꢇꢊꢇꢋꢆꢏꢘꢂꢁꢑQ~ꢒ
#ꢇ Make sure that this player is connected to
theTV through an HDMI cable.
#ꢇ Make sure that the SD card is formatted,
has enough memory to download the
video, and is of type SDHC Class 6.
#ꢇ Make sure that you have paid for the video,
and it is within the rental period.
3D videos
Cannot see 3D effects
#ꢇ Make sure that 3D output is turned on(see
"Use your Blu-ray disc/ DVD player" >
"Play a Blu-ray 3D video").
#ꢇ Make sure that the disc title being played is
Blu-ray 3D compliant.
#ꢇ Make sure that theTV is 3D and HDMI
compliant, and theTV is set to 3D mode
(refer to theTV's user manual).
#ꢇ Make sure that the 3D glasses are activated
(refer to theTV’s user manual).
Network
Wireless network is not found or distorted.
#ꢇ Make sure that the network is correctly
connected (see "Use your Blu-ray disc/
DVD player" > "Set up a network").
#ꢇ Make sure that the network installation is
made (see "Use your Blu-ray disc/ DVD
player" > "Set up a network").
#ꢇ Make sure that the wireless network is
not disturbed by microwave ovens, DECT
ꢀꢐꢂꢋꢆꢎ?ꢇꢂꢁꢇꢂꢏꢐꢆꢁꢇꢋꢆꢍ=ꢐꢔꢂꢁꢍꢋ=ꢇꢓꢍ^@ꢍꢇꢃꢆꢌꢍꢅꢆꢎꢒꢇ
#ꢇ If the wireless network does not work
properly, try a wired network installation
(see "Use your Blu-ray disc/ DVD player" >
"Set up a network").
NetTV does not work.
#ꢇ Make sure that the network is correctly
connected (see "Use your Blu-ray disc/
DVD player" > "Set up a network").
24 EN
ABOUT DIVXVIDEO: DivX® is a digital video
format created by DivX, LLC, a subsidiary
ꢂꢕꢇ*ꢂꢌꢍꢇꢜꢂꢁꢀꢂꢁꢊꢏꢍꢂꢋꢒꢇꢛꢐꢍꢎꢇꢍꢎꢇꢊꢋꢇꢂꢕ\ꢅꢍꢊꢈꢇ%ꢍꢌ'ꢇ
ꢜꢆꢁꢏꢍ\ꢆꢃ® device that plays DivX video.Visit
divx.com for more information and software
ꢏꢂꢂꢈꢎꢇꢏꢂꢇꢅꢂꢋꢌꢆꢁꢏꢇꢗꢂꢄꢁꢇ\ꢈꢆꢎꢇꢍꢋꢏꢂꢇ%ꢍꢌ'ꢇꢌꢍꢃꢆꢂꢎꢒ
ABOUT DIVXVIDEO-ON-DEMAND:This
%ꢍꢌ'ꢇꢜꢆꢁꢏꢍ\ꢆꢃ® device must be registered
in order to play purchased DivXVideo-on-
Demand (VOD) movies.To obtain your
registration code, locate the DivXVOD section
in your device setup menu. Go to vod.divx.com
for more information on how to complete your
registration.
‘Blu-rayTM’,‘Blu-ray DiscTM’,‘Blu-ray DiscTM’ logo,
‘Blu-ray 3DTM’ and ‘Blu-ray 3DTM’ logo are the
trademarks of Blu-ray Disc Association.
Š%+œ?ꢇꢊꢋꢃꢇŠ%+œꢇꢈꢂ=ꢂꢇꢊꢋꢃꢇŠꢍ=ꢐ^%ꢆ\ꢋꢍꢏꢍꢂꢋꢇ
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC in
the United States and other countries.
%ꢍꢌ'ꢇꢜꢆꢁꢏꢍ\ꢆꢃ® to play DivX® and DivX Plus®
HD (H.264/MKV) video up to 1080p HD
DLNA® , the DLNA Logo and DLNA
CERTIFIED® are trademarks, service marks,
ꢂꢁꢇꢅꢆꢁꢏꢍ\ꢅꢊꢏꢍꢂꢋꢇꢉꢊꢁꢑꢎꢇꢂꢕꢇꢏꢐꢆꢇ%ꢍ=ꢍꢏꢊꢈꢇ_ꢍꢌꢍꢋ=ꢇ
Network Alliance.
including premium content.
DivX®?ꢇ%ꢍꢌ'ꢇꢜꢆꢁꢏꢍ\ꢆꢃ®, DivX Plus® HD and
associated logos are trademarks of Rovi Corporation
or its subsidiaries and are used under license.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
BONUSVIEW™
‘BD LIVETMSꢇꢊꢋꢃꢇR<`‘;#}œ†ꢓTM’ are
trademarks of Blu-ray Disc Association.
Manufactured under license under U.S. Patent
Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535;
7,212,872; 7,333,929; 7,392,195; 7,272,567 &
other U.S. and worldwide patents issued &
pending. DTS-HD, the Symbol, & DTS-HD and
the Symbol together are registered trademarks
& DTS-HD Master Audio is a trademark of
DTS, Inc. Product includes software. © DTS, Inc.
All Rights Reserved.
‘DVDVideo’ is a trademark of DVD Format/
Logo Licensing Corporation.
ꢝꢊꢌꢊꢇꢊꢋꢃꢇꢊꢈꢈꢇꢂꢏꢐꢆꢁꢇꢝꢊꢌꢊꢇꢏꢁꢊꢃꢆꢉꢊꢁꢑꢎꢇꢊꢋꢃꢇꢈꢂ=ꢂꢎꢇꢊꢁꢆꢇ
trademarks or registered trademarks of Sun
Microsystems, Inc. in the United States and/or
other countries.
25
Language Code
Abkhazian
Afar
Afrikaans
Amharic
6566
6565
6570
6577
6582
7289
6583
6569
6589
6590
7783
6665
6669
6678
6672
6673
7866
6683
6682
6671
7789
6983
6765
6772
6769
Inupiaq
Irish
Íslenska
Italiano
Ivrit
Japanese
Javanese
Kalaallisut
Kannada
Kashmiri
Kazakh
Kernewek
Khmer
7375
7165
7383
7384
7269
7465
7486
7576
7578
7583
7575
7587
7577
8287
7589
7586
7579
Pushto
8083
8285
8185
8277
8279
8278
8377
8371
8365
8367
8382
8378
8381
8368
8373
8373
8376
8379
8384
7882
8385
7073
8387
8383
8386
8476
8489
8471
8465
8484
8469
8472
6679
8473
8479
8483
8478
8482
8475
8487
8571
8575
8582
8590
8673
8679
8765
6789
8779
8872
8973
8979
9085
Russian
Quechua
Raeto-Romance
Romanian
Rundi
Samoan
Sango
Sanskrit
Sardinian
Serbian
Shona
Arabic
Armenian
Assamese
Avestan
Aymara
Azerhaijani
Bahasa Melayu
Bashkir
Belarusian
Bengali
Bihari
Bislama
Bokmål, Norwegian
Bosanski
Brezhoneg
Bulgarian
Burmese
Castellano, Español
Catalán
Chamorro
Chechen
Chewa; Chichewa;Nyanja7889
Shqip
Sindhi
Kinyarwanda
Kirghiz
Komi
Sinhalese
Slovensky
Slovenian
Somali
Sotho; Southern
South Ndebele
Sundanese
Suomi
Swahili
Swati
Svenska
Tagalog
Tahitian
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga (Tonga Islands)
Tsonga
Tswana
Türkçe
Turkmen
Twi
Uighur
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Walloon
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Korean
Kuanyama; Kwanyama 7574
Kurdish
Lao
Latina
Latvian
Letzeburgesch;
Limburgan; Limburger 7673
Lingala
Lithuanian
Luxembourgish;
Macedonian
Malagasy
Magyar
Malayalam
Maltese
Manx
Maori
Marathi
Marshallese
Moldavian
Mongolian
Nauru
Navaho; Navajo
Ndebele, North
Ndebele, South
Ndonga
Nederlands
Nepali
Norsk
Northern Sami
North Ndebele
Norwegian Nynorsk;
Occitan; Provencal
Old Bulgarian;Old Slavonic 6785
Oriya
Oromo
Ossetian; Ossetic
Pali
Panjabi
Persian
Polski
Português
7585
7679
7665
7686
7666
7678
7684
7666
7775
7771
7285
7776
7784
7186
7773
7782
7772
7779
7778
7865
7886
7868
7882
7871
7876
7869
7879
8369
7868
7878
7967
9072
9065
Ё᭛
Chuang; Zhuang
Church Slavic; Slavonic 6785
Chuvash
Corsican
Česky
6786
6779
6783
6865
6869
6890
6978
6979
6984
6985
6976
7079
7082
7089
7074
Dansk
Deutsch
Dzongkha
English
Esperanto
Estonian
Euskara
Faroese
Français
Frysk
Fijian
Gaelic; Scottish Gaelic 7168
Gallegan
Georgian
Gikuyu; Kikuyu
Guarani
Gujarati
Hausa
Herero
Hindi
Hiri Motu
Hrwatski
Ido
7176
7565
7573
7178
7185
7265
7290
7273
7279
6779
7379
7982
7977
7983
8073
8065
7065
8076
8084
Interlingua (International)7365
Interlingue
Inuktitut
7365
7385
26
Specifications are subject to change without notice
© 2012 Koninklijke Philips Electronics N.V.
All rights reserved.
BDP5510_12_UM_V1.0
|