Register your product and get support at
USB Flash Drive
FMXXFD20B/00
EN
FR
DE
ES
Vintage edition
Vintage edition
Vintage edition
Vintage edition
Vintage edition
Vintage edition
Vintage edition
Vintage edition
Click here
2
X
X
X
X
X
X
X
Cliquez ici
Hier klicken
Haga clic aquí
Hier clicken
Fare clic qui
Clique aqui
Щелкните здесь
NL
IT
PR
RU
Note
Notes on Use
Data is safe in the following environments: In X-ray security systems at • The USB flash drive may not function correctly if it is connected to
airports and in magnetic fields with strengths not exeeding 3,500 Oe.
the computer when the computer is started up, restarted, or
restored from sleep mode.Always disconnect the USB flash drive
from the computer before performing any of these operations.
• Do not place the drive in locations that are:
– extremely hot or cold;
For customers in the U.S.A.
Changes or modifications made to this equipment not expressly
approved by company may void the FCC authorization to operate this
equipment.
– vibrating;
– exposed to corrosive gases;
Operation is subject to the following two conditions:
– dusty or dirty;
this device my not cause harmful interference, and
this device must accept any interference received, including
interference that may cause undesired operation.
– very humid;
– exposed to direct sunlight.
1
2
• Microsoft andWindows are registered trademarks of Microsoft
Corporation in the United States and other countries.
• Mac and Macintosh are trademarks of Apple Computer, Inc.,
registered in the U.S. and other countries.
• Other system names and product names that appear in this manual
are registered trademarks or trademarks of their respective
Caution
You are cautioned that any changes or modifications not expressly
approved in this manual could void your authority to operate this
equipment.
®
owners. Note that the ™ and symbols are not used in this
For customers in Canada
manual.
This Class B digital apparatus complies with Canadian ICES-003.
This device complies with Part 15 of the FCC Rules and with RSS-210
of Industry Canada.
• Power consumption in standby mode: < 100 mA.
• Our product warranty is limited only to the USB flash drive itself,
when used normally in accordance with these operating instructions
and with the accessories that were included with this unit in the
specified or recommended system environment. Services provided
by the Company, such as user support, are also subject to these
restrictions.
For customers in Europe
This product conforms to the following European Directives:
89/336/EEC, 2006/95/EEC (safety directive) and 93/68/ECC (EC
Marking Directive).This product complies with EN55022 Class B and
EN55024 for use in the following areas; residential, commercial, and
light-industrial.
• The Company cannot accept liability for damage or loss resulting
from the use of this unit, or for any claim from a third party.
3
• The Company cannot accept any liability for: problems with your
computer or other hardware arising from the use of this product;
the suitability of this product for specific hardware, software, or
peripherals; operating conflicts with other installed software; data
loss; or other accidental or unavoidable damage.
Please act according to your local rules and do not dispose of your old
products with your normal household waste.The correct disposal of
your old product will help prevent potential negative consequences for
the environment and human health.
• The Company cannot accept any liability for financial damages, lost
profits, claims from third parties, etc., arising from the use of the
software provided with this unit.
• The software specifications may be subject to change without
notice.
Environmental information
Disposal of your old product
Your product is designed and manufactured with high quality materials The making of unauthorized copies of copy-protected material,
and components, which can be recycled and reused.
including computer programmes, files, broadcasts and sound
recordings, may be an infringement of copyrights and constitute a
criminal offence. 186
This equipment should not be used for such purposes.
When this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive 2002/96/EC.
Please inform yourself about the local separate collection system for
electrical and electronic products.
4
2 Your USB flash drive
3 Install
®
Congratulations on your purchase and welcome to Philips!
Microsoft WindowsVista, XP, 2000, ME, MAC OS 9.0 or
higher:
To fully benefit from the support that Philips offers, register your
• The device driver is installed automatically when the drive is
connected to a USB port of the computer. However, with some USB
2.0 cards or boards, you may need to initiate installation manually. In
this case, follow the on-screen instructions to search for a suitable
driver. Refer to the operating system's Help file if you need any
help.
1
Note
Do not remove USB flash drive from the computer USB port as long
as the download process is in progress.
Windows 98SE:
1
2
3
Download the device driver at
Remove the protective cap from the USB connector and turn
it backwards (fig. 1).
Insert the flash drive USB connector into one of the computer’s
USB ports (fig. 2).
2
>The New Hardware wizard starts and the drive’s LED lights up.
The light intensity of the LED will gradually increase and then
diminish again.This will continue for as long as the drive is
connected to the computer.
4
Click the Next button.
5
5
Click Search for the best driver for your device.Then click
the Next button.
4 Connect
Click Specify a location.Then click the Browse button.
When the dialog box appears, specify the folder where the
installation program is stored.
6
7
Connecting the USB flash drive to your computer
Click the OK button to close the dialog box.Then click the
Next button.
Click the Next button.
Note
You can use a USB extension cable or an optional USB hub to connect
the USB flash drive to your computer.
8
9
Click the Finish button.
> Installation of the driver starts.
> Once the installation process is complete, a drive icon for the
USB flash drive appears in the My Computer window.
1
10 After confirming that the drive is in standby mode you can remove
the drive from the computer’s
USB port.
1
Remove the protective cap from the USB connector and turn
it backwards (fig. 1).
6
2
5 Enjoy
Operating the USB flash drive
• Once the USB flash drive is connected to the USB port of the
computer:
–
a software package will automatically start up enabling you to
activate various applications. See the software help file for futher
instructions.
questions and software updates.
the drive icon for the USB flash drive will appear.You can now
copy and save data on the drive by dragging files and folders on
the drive icon, just like when you copy data to a hard disk,
CD-ROM, DVD or floppy disk.
2
Insert the USB flash drive’s USB connector into one of the
computer’s USB ports (fig. 2).
>The USB flash drive’s LED lights up.The light intensity of the
LED will gradually increase and then diminish again.This will
–
continue for as long as the drive is connected to the computer.
>When copying data the LED’s light intensity will quickly
increase and diminish.
Notes
•
•
Do not remove the USB flash drive from the computer USB port
while copying and saving data otherwise the drive will no longer be
recognized by your system.
When operating underWindows the drive name varies, depending
on yourWindows version.
7
Disconnecting the USB flash drive from your computer
Mac OS 9.0 and higher
1
Drag the drive icon to the Trash.
After confirming that the the USB flash drive is in standby mode,
remove the the USB flash drive from the computer’s USB port.
®
Windows 98SE
2
• After confirming that the USB flash drive is in standby mode you can
remove the flash drive from the computer’s USB port.
®
®
Windows ME andWindows 2000
1
2
3
4
Double-click the Unplug or eject hardware icon in the task bar 6 Technical specifications
in the lower right part of the screen.
In the window that appears, select the name of the device that is to
be removed, then click the STOP button.
Interface
• High-Speed USB 2.0 (backwards compatible with USB 1.1)
Transfer rate
• Read: max. 15MB per second /Write: max. 3MB per second
(High-speed USB 2.0 port required to achieve maximum speed)
Compatible OSs
When the Stop a hardware device screen appears, make sure
the correct information is displayed, then click the OK button.
When a message appears, indicating that the USB flash drive can be
safely removed, remove the USB flash drive from the computer’s
USB port.
®
®
• Microsoft Windows Vista, XP, 2000, ME and 98SE (with driver)
• Mac OS 9.0 or later
®
Windows Vista, XP
• Linux 2.4.0 or later
1
2
3
4
Double-click the Safely Remove Hardware icon in the task bar
in the lower right part of the screen.
In the window that appears, select the name of the device that is
to be removed, then click the STOP button.
When the Stop a hardware device screen appears, make sure
the correct information is displayed, then click the OK button.
When the message Safe to Remove Hardware appears, remove For interactive help and frequently asked questions.
the the USB flash drive from the computer’s USB port. For software updates and support: www.philips.com/storage.
7 Need help?
8
9
© 2007 Koninklijke Philips Electronics N.V.
All rights reserved. Reproduction in whole or in part is prohibited
without the prior written consent of the copyright owner.
The information presented in this document does not form part of any
quotation or contract,is believed to be accurate and reliable and may
be changed without notice. No liability will be accepted by the
publisher for any consequence of its use. Publication there of does not
convey nor imply any license under patent- or other industrial or
intellectual property rights.
June 2007
NMW/RR/RD/2607
|