Philips Car Stereo System CEM3000B User Manual

Rwegwistewr yo.upr hproildiupctsan.dcgoetmsup/pworteatlcome  
CEM3000B  
EN User manual  
 
The apparatus shall not be exposed to  
dripping or splashing.  
Do not place any sources of danger on  
the apparatus (e.g. liquid filled objects,  
lighted candles).  
1 Important  
Safety  
Read and understand all instructions  
before you use your apparatus. If damage  
is caused by failure to follow instructions,  
the warranty does not apply.  
Notice  
This apparatus is designed for negative  
ground (earth) 12 V DC operation only.  
To ensure safe driving, adjust the volume  
to a safe and comfortable level.  
Improper fuses can cause damage or  
fire. When you need to change the fuse,  
consult a professional.  
The making of unauthorized copies of  
copy-protected material, including computer  
programs, files, broadcasts and sound  
recordings, may be an infringement of  
copyrights and constitute a criminal offence.  
This equipment should not be used for such  
purposes.  
Use only the supplied mounting hardware  
for a safe and secure installation.  
To avoid short circuit, do not expose the  
apparatus, remote control or remote  
control batteries to rain or water.  
Never insert objects into the ventilation  
slots or other openings on the apparatus.  
Clean the apparatus and frame with a  
soft, damp cloth. Never use substances  
such as alcohol, chemicals or household  
cleaners on the apparatus.  
Windows Media and the Windows logo are  
trademarks, or registered trademarks of  
Microsoft Corporation in the United States  
and/or other countries.  
Never place any objects other than discs  
into the apparatus.  
Never use solvents such as benzene,  
thinner, cleaners available commercially,  
or anti-static sprays intended for discs.  
Visible and invisible laser radiation when  
open. Avoid exposure to beam.  
Risk of damage to the apparatus screen!  
Never touch, push, rub or strike the  
screen with any object.  
“Made for iPod” and “Made for iPhone”  
mean that an electronic accessory has been  
designed to connect specifically to iPod, or  
iPhone respectively, and has been certified by  
the developer to meet Apple performance  
standards. Apple is not responsible for the  
operation of this device or its compliance with  
safety and regulatory standards. Please note  
that the use of this accessory with iPod, or  
iPhone may affect wireless performance.  
Apple is not responsible for the operation of  
this device or its compliance with safety and  
regulatory standards.  
Caution  
Use of controls or adjustments or performance  
of procedures other than herein may result in  
hazardous radiation exposure or other unsafe  
operation.  
iPod and iPhone are trademarks of Apple Inc.,  
registered in the U.S. and other countries.  
4
EN  
 
This apparatus includes this label:  
Environmental information  
All unnecessary packaging has been omitted.  
We have tried to make the packaging easy to  
separate into three materials: cardboard (box),  
polystyrene foam (buffer) and polyethylene  
(bags, protective foam sheet.)  
Your system consists of materials which can  
be recycled and reused if disassembled by  
a specialized company. Please observe the  
local regulations regarding the disposal of  
packaging materials, exhausted batteries and  
old equipment.  
Recycling  
Any changes or modifications made to this  
device that are not expressly approved by  
Philips Consumer Lifestyle may void the user’s  
authority to operate the equipment.  
2010 © Koninklijke Philips Electronics N.V.  
All rights reserved.  
Specifications are subject to change without  
notice. Trademarks are the property of  
Koninklijke Philips Electronics N.V. or their  
respective owners. Philips reserves the right  
to change products at any time without being  
obliged to adjust earlier supplies accordingly.  
Your product is designed and manufactured  
with high quality materials and components,  
which can be recycled and reused.  
When you see the crossed-out wheel bin  
symbol attached to a product, it means the  
product is covered by the European Directive  
2002/96/EC:  
Never dispose of your product with other  
household waste. Please inform yourself about  
the local rules on the separate collection of  
electrical and electronic products. The correct  
disposal of your old product helps prevent  
potentially negative consequences on the  
environment and human health.  
Your product contains batteries covered by  
the European Directive 2006/66/EC, which  
cannot be disposed of with normal household  
waste.  
Please inform yourself about the local rules on  
separate collection of batteries. The correct  
disposal of batteries helps prevent potentially  
negative consequences on the environment  
and human health.  
This product complies with the radio  
interference requirements of the European  
Community.  
EN  
5
 
i ISO male connectors  
j Disassembly tools x 2 pcs  
k User manual  
2 Your car audio  
system  
l Quick start guide  
m DAB Antenna  
Congratulations on your purchase, and  
welcome to Philips!To fully benefit from the  
support that Philips offers, register your product  
a
b
Introduction  
With the in-car audio system, you can enjoy  
your drive while listening to:  
c
f
d
e
FM or AM (MW) radio  
DAB radio  
Audio from CD or MP3 disc  
Audio from USB devices  
Audio from iPod/iPhone  
Audio from other external devices  
h
g
The unit supports the following media format:  
i
k
l
j
What’s in the box  
Check and identify the contents of your package:  
a Main unit  
b Remote control  
c Front panel  
d Trim plate  
e Carrying case for front panel  
f Sleeve  
g Rubber cushion  
h Screws x 4 pcs  
6
EN  
 
Overview of the main unit  
a DBB/SUB-W  
c BAND/  
Switch on or off Dynamic Bass Boost  
(DBB) sound.  
Select tuner band.  
Return to previous menu.  
Switch on or off subwoofer.  
d
/
b
Turn the unit on or off.  
Confirm selection.  
Mute or unmute sound.  
Rotate to adjust settings.  
Unlock the panel.  
EN  
7
 
e
f
g
q MENU  
Enter iPod/iPhone control mode.  
Eject disc.  
Access system menu.  
6281'  
r
Select MAX Sound audio setting.  
s EQ AUDIO  
Connector for USB and iPod/iPhone.  
Select equalizer (EQ) setting.  
Access audio setting menu.  
h MP3 LINK  
Connect external audio device.  
t SOURCE  
Select audio source.  
i OPTIONS/CLOCK  
Access option menu.  
Display the DAB related information.  
View clock.  
u RESET  
Restore default settings.  
v Disc slot  
j 5+  
Select or store preset radio stations  
1 to 10.  
Select or store preset DAB radio  
stations 1 to 20.  
Overview of the remote  
control  
k SONG/4  
i
j
Search for track.  
Select or store preset station 4.  
l 3  
Select or store preset station 3.  
h
g
f
e
k
m FOLDER/2  
l
m
n
o
Search for folder.  
Select or store preset station 2.  
n 1  
Select or store preset station 1.  
d
c
o
/
p
q
r
Tune to radio/DAB stations.  
Skip/search for tracks.  
Fast forward/backward play.  
b
a
s
p DISP/  
In FM/DAB/USB mode, press and  
hold to select LCD color  
In DAB mode , press briefly to  
display DAB radio station list  
In tuner or iPod/iPhone mode, press  
briefly to display station info or iPod/  
iPhone info  
a PRESET +/-  
Select preset radio station.  
Access manual store.  
In iPod/iPhone mode, press and hold  
to access music search mode  
b OPTIONS  
Access option menu.  
8
EN  
 
c
r DISP/  
Start play.  
In FM/DAB/USB mode, press and  
Pause or resume play.  
hold to select LCD color  
In DAB mode , press briefly to  
display DAB radio station list  
In tuner or iPod/iPhone mode, press  
briefly to display station info or iPod/  
iPhone info  
d AUDIO  
Access audio setting menu.  
e
/
Tune to radio/DAB station.  
Skip track.  
Fast backward/forward play.  
In iPod/iPhone mode, press and hold  
to access music search mode  
s CLOCK  
f OK  
View clock.  
Confirm selection.  
g MENU  
Access system menu.  
h
/PWR/  
Turn the unit on or off.  
Mute or restore volume.  
i VOL+/-  
Adjust volume.  
j BAND/  
Select tuner band.  
Return to previous/top menu.  
k SOURCE  
Select audio source.  
l
m
Enter iPod/iPhone control mode.  
Select MAX Sound audio setting.  
Select equalizer (EQ) setting.  
6281'  
n EQ  
o DBB  
Turn on or off Dynamic Bass Boost  
(DBB) sound.  
p SONG  
Search for tracks.  
q FOLDER  
Search for folders.  
EN  
9
 
3 Get started  
Caution  
Use the controls only as stated in this user  
manual.  
Always follow the instructions in this chapter in  
sequence.  
If you contact Philips, you will be asked for the  
model and serial number of your apparatus.The  
model number and serial number are on the  
bottom of your apparatus.Write the numbers  
here:  
Place the DAB antenna  
Warning  
Make sure the antenna cable does not interfere  
with the safe operation of driving wheel, air  
bags and seatbelts or other equipment.  
Model No. __________________________  
Serial No. ___________________________  
Before entering low overhangs, car washes, or  
other places with obstacles which may catch  
on or touch the antenna, remove the antenna  
to avoid potential damage.  
Damage caused by not following the installation  
instructions is not covered by warranty.  
Install the car audio  
Please refer to the “Installation guide” in quick  
start guide.  
DAB / DAB+Antenna  
Attach the front panel  
1 Attach the trim plate.  
DAB / DAB+Antenna  
2 Insert the right side of the panel in the  
chassis until it is correctly engaged.  
3 Press the left side of the panel until the  
mechanism locks it into place.  
10 EN  
 
1 Find a location as flat as possible on the  
outside of your car. For example, the roof  
near the windshield, or rear window.  
Note: The magnetic base of the  
antenna will remain secure at normal  
vehicle speeds in non-windy conditions.  
Antennae installed on curved surfaces  
may become detached in windy  
conditions.  
1 Remove the protective tab to activate the  
remote control battery.  
To replace the remote control battery:  
1 Open the battery compartment.  
2 Insert one CR2025 battery with correct  
polarity (+/-) as indicated.  
3 Close the battery compartment.  
2 Make sure the selected surface is  
clean and free of dirt, water, or other  
substances which could inhibit attachment  
to the surface.  
3 Gently place the magnetic steel base of  
the DAB/DAB+ antenna on the surface  
you selected. The magnetic steel base will  
stick to any metallic surface.  
Note: Damage may be caused to the  
paintwork of the car if the antenna slides  
or rotates on the car surface.  
4 Route the cable: Tuck the cable under  
weather strip of the door and run the  
cable through the passenger doorway  
or tailgate. Reserve enough slack in  
your cable to fit open doors or deck  
lids. Secure cables to avoid cable being  
pinched between hinges and the door.  
Turn on  
1 Press to turn on the unit.  
To turn off the unit, press and hold  
for a few seconds.  
Install remote control battery  
Set clock  
Caution  
1 Press MENU.  
Risk of explosion! Keep batteries away from heat,  
sunshine or fire. Never discard batteries in fire.  
Risk of decreased battery life! Never mix  
different brands or types of batteries.  
Risk of product damage! When the remote  
control is not used for long periods, remove  
the batteries.  
2 Press  
/
repeatedly until [CLK SET]  
displays.  
3 Rotate to set hour.  
4 Press to confirm.  
5 Rotate set minute.  
6 Press to confirm.  
Perchlorate Material - special handling may  
perchlorate.  
For first-time use:  
EN 11  
 
View clock  
4 Listen to radio  
1 Press and hold CLOCK until the clock is  
displayed.  
Tune to a radio station  
1 Press SOURCE repeatedly to select radio  
mode.  
2 Press BAND/ to select band: [FM1],  
[FM2], [FM3], [AW1] or [AW2].  
3 Press  
or  
to tune to a radio station  
manually.  
» The radio station is broadcast.  
» To search for a radio station  
automatically, press and hold  
for a few seconds.  
or  
Select tuner region  
You can select suitable country/region of the  
radio.  
1 Press SOURCE to select Radio mode.  
2 Press MENU.  
3 Press  
/
repeatedly until [AREA] is  
displayed.  
4 Rotate to select:  
[USA]  
[LATIN]  
[Europe]  
[ASIA]  
[M-EAST]  
[RUSSIA]  
Select tuner sensitivity  
To receive more radio stations or only  
stations with strong signal, you can adjust the  
tuner sensitivity.  
1 Press OPTIONS repeatedly to select  
[LOCAL SEEK].  
2 Rotate to select a setting:  
[LOCAL SEEK ON]: Only stations  
with strong signal can be broadcast.  
12 EN  
 
[LOCAL SEEK OFF]: Stations with  
strong and weak signals can be  
broadcast.  
Play with RDS  
The RDS (Radio Data System) function  
operates only in areas with FM stations  
broadcasting RDS signals. If you tune to an RDS  
station, an RDS icon and information about the  
presenter, station or program is displayed.  
Store radio stations in  
memory  
You can store up to 10 stations in each band.  
Turn on RDS  
Store stations automatically  
Note  
1 Press OPTIONS repeatedly until  
The default setting for RDS is on.  
[AUTO-STORE] displays.  
2 Press to confirm.  
1 Press MENU.  
» The 10 strongest stations of the  
selected band are saved in preset  
channel automatically.  
2 Press  
/
repeatedly until [RDS] is  
displayed.  
3 Rotate to select option:  
[RDS ON]: The RDS function is on.  
[RDS OFF]: The RDS function is off.  
Store stations manually  
1 Tune to a station that you want to store.  
Select program type  
Before tuning to RDS stations, you can select  
program type and let the unit search only for  
programs of the selected category.  
2
For preset 1 to preset 4, press and  
hold button 1 to 4 to store the  
corresponding station.  
For preset 5 to 10, press and hold  
button 5+ and rotate to select a  
number (1-10) for the preset.  
1 Press OPTIONS until [PTY] displays.  
2 Press to confirm.  
3 Rotate to select a type, then press  
3 Press to confirm.  
» The station is saved in the selected  
channel.  
to confirm.  
» The preset number lights up on the  
LCD screen.  
Tune to a preset station  
1 Press BAND/ to select band.  
2 Press 5+ and rotate to select the preset  
number.  
3 Press to confirm the selection.  
EN 13  
 
Item Program type Description  
Select alternate frequencies  
If the radio signal is poor, turn on AF  
(Alternate Frequency) to search for another  
station with stronger signal.  
1
2
NEWS  
AFFAIRS  
News services  
Politics and current  
affairs  
3
INFO  
Special information  
programs  
1 Press OPTIONS.  
2 Press  
/
repeatedly until [AF] displays.  
4
5
SPORT  
EDUCATE  
Sports  
3 Rotate to select a setting:  
Education and  
advanced training  
Radio plays and  
literature  
Culture, religion and  
society  
[AF ON]: Turn on the AF mode.  
[AF OFF]: Turn off the AF mode.  
6
7
DRAMA  
CULTURE  
Set region for AF tuning  
You can define AF tuning region:  
8
9
SCIENCE  
VARIED  
Science  
Entertainment  
programs  
[REG ON] Only stations in current region  
can be tuned to automatically.  
[REG OFF] All stations can be tuned to  
automatically.  
10  
11  
12  
13  
14  
15  
POP M  
ROCK M  
EASY M  
LIGHT M  
CLASSICS  
OTHER M  
Pop music  
Rock music  
Light music  
Light classical music  
Classical music  
Special music  
programs  
1 Press MENU.  
2 Press  
/
repeatedly until [REG]  
displays.  
3 Rotate to select a setting.  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
WEATHER  
FINANCE  
CHILDREN  
SOCIAL  
RELIGION  
PHONE IN  
TRAVEL  
LEISURE  
JAZZ  
COUNTRY  
NATION M  
OLDIES  
Weather  
Finance  
Children’s programs  
Social Affairs  
Religion  
Phone In  
Travel  
Leisure  
Jazz Music  
Country Music  
National Music  
Oldies Music  
Folk Music  
Receive traffic announcement  
If you do not want to miss traffic  
announcement when enjoying music, turn on  
the TA (Traffic Announcement) function.  
1 Press OPTIONS.  
2 Press  
/
repeatedly until [TA]  
displays.  
3 Rotate to select a setting:  
[TA ON]: When there is traffic  
announcement, the unit switches  
to the tuner mode (regardless of  
the current mode) and begins to  
broadcast the traffic conditions.  
When the traffic announcement  
is over, it returns to the previous  
mode.  
FOLK M  
DOCUMENT Documentary  
TEST  
ALARM  
Alarm Test  
Alarm  
[TA OFF]: Traffic announcement  
does not cut in.  
14 EN  
 
Set RDS clock  
You can use time signal that is broadcast  
together with the RDS signal to set the clock  
of the unit automatically.  
5 Listen to  
Digital Audio  
Broadcasts  
(DAB)  
1 Press MENU.  
2 Press  
/
repeatedly until [CT]  
displays.  
3 Rotate to select a setting:  
[CT ON]: Turn on the RDS clock.  
Digital Audio Broadcasting (DAB), is a way  
of broadcasting radio digitally through a  
network of transmitters. It provides you with  
more choice, better sound quality, and more  
information.  
For the first time when DAB mode is  
switched on.  
1 Press SOURCE on the main unit  
repeatedly to select DAB/DAB+.  
» The system performs auto scan.  
Time shown on the unit synchronizes  
with that on the RDS station.  
[CT OFF]: Turn off the RDS clock.  
Tip  
The accuracy of the transmitted time depends  
on the RDS station that transmits the time  
signal.  
» All the available DAB stations are  
stored.  
» The radio tunes to the first available  
station  
Tip  
The display shows a rectangle. The position  
of the rectangle indicates the degree of signal  
strength. (The further towards the right, the  
greater the signal strength.)  
If there is no DAB coverage currently available,  
or DAB signal is too weak in your area, no  
DAB station will be found, and message like  
“No Station Found, Scan Again” displays.  
Tune to DAB radio station  
manually  
1 Under DAB mode, press and hold  
/
to enter manual seek mode.  
» “MANUAL” blinks on LCD screen.  
2 Press  
/
repeatedly until the the  
desired channel/frequency appears.  
EN 15  
 
3 Press to confirm.  
» The station is saved in the selected  
channel.  
Scan for new DAB stations  
1 Under DAB mode, press MENU  
» The preset number is displayed on the  
repeatedly until [DAB SCAN] is displayed.  
LCD screen.  
2 Press to confirm.  
» The system scans for all available DAB  
radio stations and broadcasts the first  
station.  
Note  
If a DAB station is already stored under a  
preset location, new DAB station assigned to  
this location will overwrite the old DAB station.  
DAB station presets will not overwrite FM  
presets.  
Tip  
New stations and services will be added in the  
DAB broadcast. To make new DAB stations  
and services available on your car audio, scan  
on a regular base.  
Tune to a preset station  
1 Press 5+ and rotate to select the preset  
Store DAB stations  
automatically  
number.  
2 Press to confirm the selection.  
1 In DAB mode, press MENU to enter the  
Note  
menu options.  
If the Scanned/Preset DAB station signal is  
not available at particular time/region, [No] is  
displayed.  
2 Press  
/
repeatedly until [DAB  
STORE] displays.  
3 Press to confirm.  
» The 20 strongest stations of the  
selected band are saved in preset  
channel automatically.  
Display DAB information  
On the display of DAB broadcasting, the first  
line shows station name, and the second line  
shows the service information for the current  
station. 6 types of service information are  
available.  
Program DAB radio stations  
manually  
You can program a maximum of 20 preset DAB  
radio stations.  
1 Tune to a DAB station.  
2 Press OPTIONS/CLOCK repeatedly to  
scroll through the display information  
(if available).  
1 Tune to a DAB station.  
2
For preset 1 to preset 4, press and  
hold button 1 to 4 to store the  
corresponding station.  
For preset 5 to 10, press and hold  
button 5+ and rotate to select a  
number (1-20) for the preset.  
16 EN  
 
Multiplex name: Displays the name  
of the DAB multiplex in which the  
current station is broadcast.  
Multiplex info: Displays the channel  
and frequency of the current DAB  
multiplex.  
signal is strong, then the audio will  
fade in to the original volume level.  
[WEAK TO FM]: When the DAB  
signal is weak, switch to the last  
listened FM station. Switch back to  
DAB when signal is strong.  
Program type: Describes the content  
of the current DAB station.  
Scrolling text: Information broadcast  
by most DAB stations (may include  
song titles, news, etc)  
Signal Strength: Displays a meter  
illustrating the strength of the DAB  
signal 0-100.  
DAB Dynamic Range Control  
DRC adds or removes a degree of  
compensation for the differences in the dynamic  
range between radio stations.  
1 In DAB mode, press MENU to enter the  
Signal Quality: Display DAB signal  
quality, from 0 to 100.  
menu options.  
2 Press  
/
repeatedly until [DAB DRC]  
Tip  
is displayed.  
3 Rotate to select an option.  
If any information above is selected, when  
you tune to another DAB station, you can  
press OPTIONS/CLOCK once to display the  
selected information, no need to scroll through  
the list.  
[DRC Off]: No compensation  
applied. (the default)  
[DRC Low]: Medium compensation  
applied.  
[DRC High]: Maximum compensation  
applied.  
Weak DAB signal  
Note  
Select the switch over option when DAB signal  
is weak.  
The best way to determine which of these DRC  
value settings suits you best is to experiment  
with them on various source material.  
1 In the DAB mode, press MENU to enter  
the menu options.  
2 Press  
/
repeatedly until [WEAK  
DAB] is displayed.  
DAB Antenna  
3 Rotate to select an option.  
1 In DAB mode, press MENU to enter the  
[WEAK MUTE]: When the DAB  
signal is weak, fade out the DAB  
audio and mute it until the DAB  
menu options.  
2 Press  
/
repeatedly until DAB antenna  
option is displayed.  
3 Rotate to select an option.  
EN 17  
 
[ANTENNA OFF]: Select when using  
the DAB aerial without the booster.  
[ANTENNA 12V]: Select when using  
the DAB aerial with the booster (12V).  
6 Play audio files  
Note  
Ensure that the disc or device contains playable  
files.  
DAB sorting  
With this option, you can select the way that  
the station list is arranged.  
1 In DAB mode, press MENU to enter the  
Play a disc  
menu options.  
2 Press  
/
repeatedly until [DAB  
Note  
SORTING] is displayed.  
3 Rotate to select an option.  
You cannot play CDs encoded with copyright  
protection technologies.  
[SORT ACTIVE]: Lists active stations  
first on the station list.  
You can play commercially available audio CDs  
and these discs:  
[SORT A-Z]: Lists all stations in  
alphanumeric order (0-9, A-Z).  
[SORT MULTIPLEX]: Lists stations  
in groups according to their multiplex  
(a group of stations broadcast by the  
same operator).  
CD-Recordables (CD-R)  
CD-Rewritables (CD-RW)  
MP3 CDs  
WMA CDs  
You can tune to a DAB station through the  
sorted DAB station list.  
Note  
Ensure that the disc contains playable content.  
1 Under DAB mode, press DISP once to  
display the DAB station list.  
1 Insert a CD with the printed side facing up.  
2 Rotate to scroll through the DAB  
» Play starts automatically.  
station list in the order set above.  
To pause CD play, press  
.
3 Press to switch to the selected DAB  
To resume CD play, press again.  
station.  
To skip to the previous/next track, press  
or  
.
To search backward/forward rapidly in  
the current track, press and hold  
for a few seconds.  
or  
Remove the CD  
To take out the CD, press on the front panel.  
Tip  
If the disc is blocked in the disc compartment,  
press and hold until the disc comes out.  
18 EN  
 
Play from USB  
Search for an MP3/WMA  
track  
Note  
Search within the current folder  
Ensure that the USB device contains playable  
music.  
1 Press SONG.  
» The name of the current track is  
displayed.  
2 Rotate to select another track in  
Insert the USB device  
current folder  
1 Slide the USB connector cover marked  
3 Press to confirm.  
to the left.  
Search in other folder  
2 Insert the USB storage device into the  
USB connector.  
1 Press FOLDER.  
» The name of the current folder is  
displayed.  
» The unit starts playing from the USB  
storage device automatically.  
2 Rotate to navigate through all folders.  
3 Press to access the selected folder.  
4 Rotate to select a track in the folder.  
5 Press to start play.  
Tip  
To go back to upper level of a folder, press  
.
View play information  
1 During playing, press DISP repeatedly to  
view:  
Track number and elapsed play time  
Artist  
Album  
Title  
Folder  
File  
Remove the USB device  
1 Press to turn off the unit.  
2 Remove the USB storage device.  
Repeat play  
1 During play, press OPTIONS repeatedly  
until [REPEAT] is displayed.  
2 Rotate to select a setting.  
EN 19  
 
[REPEAT ALL]: Play all tracks repeatedly.  
[REPEAT TRK]: Play current track  
repeatedly.  
[REPEAT FLD]: Play all tracks in the  
current folder repeatedly.  
Made for.  
iPod nano (2nd generation)  
iPod nano (3rd generation, 4GB only)  
iPod nano (3rd generation, 8GB only)  
iPod nano (4th generation)  
iPod nano (5th generation)  
iPod classic (1st generation)  
iPod classic (2nd generation)  
iPod touch (1st generation)  
iPod touch (2nd generation)  
iPod touch (3rd generation)  
iPod video (30GB, 80GB only)  
iPhone  
Shuffle play  
You can play the tracks in random order:  
1 During play, press OPTIONS repeatedly  
until [RANDOM] displays.  
2 Rotate to select a setting:  
iPhone 3G  
[RANDOM OFF]: Turn off random  
play.  
[RANDOM FLD]: start random play  
for all tracks in the current folder.  
[RANDOM ALL]: start random play  
for all tracks.  
iPhone 3GS  
iPhone 4  
Connect iPod/iPhone  
1 Slide the USB connector cover marked  
to the left.  
Intro play  
You can play the first 10 seconds of each track.  
2 Insert USB adaptor on one end of iPod/  
iPhone cable to the USB connector on  
the main unit.  
3 Insert the other end of the iPod/iPhone  
cable to the iPod/iPhone connector.  
» The unit starts playing from the USB  
storage device automatically.  
1 During play, press OPTIONS repeatedly  
until [INTRO] displays.  
2 Rotate to select a setting:  
[INTRO OFF]: Cancel intro play and  
start normal play.  
[INTRO FLD]: Start introl play in the  
current folder.  
[INTRO ALL]: Play the first  
10 seconds of each track.  
Play from iPod/iPhone  
You can enjoy audio from iPod/iPhone through  
this unit.  
Compatible iPod/iPhone  
Apple iPod and iPhone models with a 30-pin  
dock connector:  
20 EN  
 
Control music playback on iPod/  
iPhone  
Connect external sound  
source  
1 Make sure that the iPod/iPhone is  
1 Connect the external sound source to  
MP3 LINK connector with a 3.5 mm  
cable.  
connected correctly.  
2 Press SOURCE to select iPod USB mode.  
3 Press repeatedly to toggle between the  
2 Press SOURCE repeatedly until [MP3  
two control modes:  
LINK] is displayed.  
iPod control mode: Use the buttons/  
touch screen on iPod/iPhone to  
control the music.  
Audio control mode: Use the  
control buttons on car audio to  
control the music.  
3 Operate the external component  
(See the instructions supplied with the  
external component).  
To control playback under audio control  
mode:  
To pause/resume play, press  
To skip to a track, press  
To search during play, press and  
hold , then release to resume  
normal play.  
To navigate the menu, press  
.
/
.
/
,
rotate to select, then press to  
confirm.  
Search for a track on iPod/iPhone  
1 Press SOURCE repeatedly to select iPod  
mode.  
2 Press BAND/ to browse iPod/iPhone  
menu.  
3 Rotate to select the artist search  
mode, and press to confirm.  
4 Press DISP/ to search alphabetically.  
5 Rotate to select artist, then press to  
confirm.  
6 Rotate to select song in current album.  
7 Press to start play.  
Note  
You cannot control the music via iPod/iPhone  
under audio control mode.  
EN 21  
 
[POP] (pop)  
7 Adjust sound  
[USER] (user)  
[TECHNO] (techno)  
[ROCK] (rock)  
[CLASSIC] (classic)  
[JAZZ] (jazz)  
Adjust volume  
1 Rotate clockwise/anticlockwise to  
increase/decrease volume.  
Turn on/off max sound  
6281'  
1 Press  
.
Mute  
» The current setting is displayed.  
» [MAX ON]:The maximum sound  
You can turn off the sound of your audio.  
(max sound) function is on.  
1 During play, press  
.
» [MAX OFF]:The maximum sound  
To resume sound, press again.  
function is off.  
Turn DBB and subwoofer  
on/off  
Other sound settings  
You can also change the preset EQ/Audio  
settings.  
1 Press DBB, then the current setting is  
displayed:  
» [DBB ON] :The Dynamic Bass Boost  
(DBB) function is on.  
1 Press EQ/Audio for 3 seconds.  
2 Press  
/
repeatedly to select the item  
» [DBB OFF] :The DBB function is off.  
to be adjusted:  
[BASS LEVEL] range: -7 to +7  
[BASS CFQ] (bass center frequency)  
range: 60, 80, 100, 200.  
2 Press DBB again to change the DBB  
setting.  
3 Press and hold DBB to access subwoofer  
[MIDDLE LEVEL] range:-7 to +7  
[MIDDLE CFQ] (middle center  
frequency) range: 0.5k, 1.0k, 1.5k, 2.5k.  
[TREBLE LEVEL] range: -7 to +7  
[TREBLE CFQ] (treble center  
frequency) range: 10.0k, 12.5k, 15.0k,  
17.5k.  
settings:  
» [SUBWOOFER ON]:The subwoofer  
function is on.  
» [SUBWOOFER OFF]:The subwoofer  
function is off.  
[BALANCE] range: 12L to 12R.  
(L= left speaker, R = right speaker)  
[FADER] range: 12R to 12F.  
(R = rear speaker, F = front speaker)  
[SUBWOOFER] range: 0 to 12.  
[RESUME]: Resume the audo setting  
value to factory default value.  
Select preset equalizer  
1 Press EQ/Audio.  
» Current Equalizer setting is displayed.  
2 Press EQ/Audio again to select a preset  
EQ setting:  
3 Rotate to select a value/option.  
[OPTIMAL] (optimal)  
[FLAT] (flat)  
22 EN  
 
3 Rotate to select a setting:  
8 Adjust system  
settings  
[DEMO ON]: Turn on the demo  
mode. When the unit is idle for  
more than 10 seconds, all functions  
are displayed.  
[DEMO OFF]: Turn off the demo  
mode.  
Turn beep sound on/off  
Each time you press a button, the unit beeps.  
You can turn on or off this beep sound.  
LCD Color  
You can change LCD background color.  
1 Press MENU.  
2 Press  
/
repeatedly until [BEEP] is  
1 Press MENU.  
displayed.  
2 Press  
/
repeatedly until [LCD  
3 Rotate to select a setting:  
COLOR] displays.  
[BEEP ON]: Turn on the beep sound.  
[BEEP OFF]: Turn off the beep sound.  
3 Rotate to select a setting:  
[DEFAULT] (default setting)  
[COLOR SCAN] (color scan)  
[WHITE] (white)  
[GREEN 1] (green 1)  
[GREEN 2] (green 2)  
[GREEN 3] (green 3)  
[AMBER] (amber)  
[PINK 1] (pink 1)  
[PINK 2] (pink 2)  
[PURPLE 1] (purple 1)  
[PURPLE 2] (purple 2)  
[BLUE 1] (blue 1)  
[BLUE 2] (blue 2)  
[USER COLOR] (user color)  
Select blackout setting  
You can set the screen to turn off automatically  
after the unit is idle for 10 or 20 seconds.  
1 Press MENU.  
2 Press  
/
repeatedly until [BLKOUT]  
is displayed.  
3 Rotate to select a setting:  
[BKO 10 S]: Turn off the screen  
automatically 10 seconds after last  
operation.  
[BKO 20 S]: Turn off the screen  
automatically 20 seconds after last  
operation.  
[BKO OFF]: Never turn off the  
screen.  
Set user color  
1 Press MENU.  
2 Press  
/
repeatedly until [LCD  
COLOR] displays.  
3 Press  
.
Turn demo mode on/off  
1 Press MENU.  
4 Rotate to select [USER COLOR].  
5 Press to confirm.  
6 Rotate to adjust color of the LCD.  
2 Press  
/
repeatedly until [DEMO] is  
R(red)/G(green)/B(blue)  
displayed.  
7 Press to exit user color setting mode.  
EN 23  
 
9 Additional  
information  
Dimmer  
1 Press MENU  
2 Press  
/
repeatedly until [DIMMER] is  
displayed.  
3 Rotate to toggle between the settings  
Detach the front panel  
[DIMMER Hi]  
[DIMMER Lo]  
You can detach the front panel to deter theft.  
1 Press to release the panel.  
2 Push the left side of the panel rightward.  
Reset  
You can reset the unit to its default setting.  
1 Detach the front panel.  
2 Press the reset button by using a ball-  
point pen or a similar tool.  
» Preset adjustments such as preset  
channels and sound adjustments are  
erased.  
3 Pull the panel towards you to disengage it  
from the chassis.  
4 Store the panel in the supplied carry case  
to protect it from dirt or damage.  
Replace fuse  
If the fuse is damaged,  
1 Check the electric connection.  
2 Buy a fuse that matches the voltage of the  
damaged fuse.  
3 Replace the fuse.  
24 EN  
 
10 Product  
information  
Note  
Product information is subject to change  
without prior notice.  
Power supply  
12 V DC (11 V -  
16 V), negative  
ground  
Note  
If the new fuse gets damaged again, there may  
be an internal malfunction. Consult your Philips  
dealer.  
Fuse  
15 A  
Suitable speaker  
impedance  
4 - 8  
Maximum power output 50 W x 4 channels  
Remove the unit  
You can remove the unit from the dashboard.  
Continuous power  
24 W x 4 RMS  
output  
(4 10% T.H.D.)  
Pre-Amp output voltage 2.5 V  
1 Detach the front panel.  
Subwoofer output  
2.0 V  
voltage  
2 Pull out the unit by using the disassembly  
Aux-in level  
Dimensions (W x H x D) 188 x 58 x 201 mm  
500 mV  
tools.  
Weight  
1.47 kg  
Radio  
Frequency range - 87.5 - 108.0 MHz  
FM (100kHz per step in auto  
search and 50kHz per  
step in manual search)  
Frequency range - 522 - 1620 KHz (9 kHz)  
AM(MW) 530 - 1710 kHz (10 kHz)  
Usable sensitivity - 8 μV  
FM  
Usable sensitivity - 30 μV  
AM(MW) (S/N =  
20 dB)  
DABTuner  
Frequency range - FM 174 - 240 MHz  
Sensitivity  
Selectivity  
-100dBm(Band III)  
40dB  
EN 25  
 
Compatible USB storage devices:  
11 Troubleshooting  
USB flash memory: USB 1.1 host with  
interface reading all speed support  
(1.1, 2.0)  
USB flash players: USB 1.1 host with  
interface reading all speed support  
(1.1, 2.0)  
Caution  
Never remove the casing of this apparatus.  
Supported formats:  
To keep the warranty valid, never try to repair  
the system yourself.  
If you encounter problems when using this  
apparatus, check the following points before  
requesting service.  
USB or memory file format: FAT16, FAT32  
MP3 bitrate (data rate): 32-320 Kbps and  
variable bitrate  
WMA V4, V7, V8, V9 (L1, L2)  
ISO9660, Joliet  
Maximum title number: 512 (depending  
on file name length)  
No power or no sound.  
Car engine is not on. Switch on the car  
engine.  
Cable is not correctly connected. Check  
connections.  
Maximum album number: 255  
Supported sampling frequencies: 2 kHz,  
44.1 kHz, 48 kHz  
Fuse is burnt. Replace fuse.  
Volume is too low. Adjust volume.  
If the above solutions cannot help, press  
the RESET button.  
Make sure that the track played is of a  
compatible format.  
Supported bitrates: 2~256 (kbps),  
variable bitrates  
Directory nesting up to a maximum of  
8 levels  
Number of albums/ folders: CD  
maximum 99, USB maximum 199  
Number of tracks/titles: maximum 999  
ID3 tag v2.0 to v2.4  
File name in Unicode UTF8 (maximum  
length 64 bytes)  
Noise in broadcasts.  
Signals are too weak. Select other  
stations with stronger signals.  
Check the connection of the car antenna.  
Change broadcast from Stereo to mono.  
Unsupported formats:  
Cannot play disc  
Empty albums: an empty album is an  
album that does not contain MP3/WMA  
files, and is not be shown in the display.  
Unsupported file formats are skipped. For  
example, Word documents (.doc) or MP3  
files with extension .dlf are ignored and  
not played.  
make sure that the disc label is inserted  
with the printed side facing up.  
Wipe the disc with fiber cleaning cloth  
from the center to the edge in a straight  
line.  
This disc may be defective. Play another  
disc.  
Make sure that the CD is a finalized  
CD/CD-R/CD-RW.  
Make sure that the CD is not encoded  
with copyright protection technologies.  
AAC, WAV, PCM audio files  
DRM protected WMA files (.wav, .m4a,  
.m4p, .mp4, .aac)  
WMA files in Lossless format  
The CD skips tracks  
Make sure that the CD is not damaged  
or dirty.  
Make sure that random mode is  
deactivated.  
26 EN  
 
Disc cannot be ejected  
Press and hold .  
12 Glossary  
Preset stations lost.  
Battery cable is not correctly connected.  
Connect the battery cable to the terminal  
that is always live.  
M
MP3  
A file format with a sound data compression  
system. MP3 is the abbreviation of Motion  
Picture Experts Group 1 (or MPEG-1) Audio  
Layer 3. With the MP3 format, one CD-R or  
CD-RW can contain about 10 times more  
data than a regular CD.  
Display show ERR-12  
USB data error. Check the USB storage  
device.  
W
WMA (Windows Media Audio)  
An audio format owned by Microsoft, is a  
part of Microsoft Windows Media technology.  
Includes Microsoft Digital Rights Management  
tools, Windows Media Video encoding  
technology, and Windows Media Audio  
encoding technology.  
EN 27  
 
© 2011 Koninklijke Philips Electronics N.V.  
All rights reserved.  
CEM3000B_05_UM_V3.1  
 

Pelco DVR C623M C User Manual
Pentair Universal Remote EZ100 User Manual
Philips Cassette Player AQ 6598 17 User Manual
Philips Flat Panel Television BDL5231V User Manual
Philips Flat Panel Television BDL5530EL User Manual
Philips SONAR HR2200 User Manual
Polar Heart Rate Monitor F4TM User Manual
Polaris Offroad Vehicle 4X4 700 EFI User Manual
Polaroid Digital Camera 205 User Manual
Poulan Lawn Mower PR20PH42STB User Manual