Always there to help you
Register your product and get support at
HTL9100
Question?
Contact
Philips
User manual
Contents
1 Important
2
Safety
2
3
3
3
3
Care for your product
Care of the environment
Compliance
Help and support
2 Your SoundBar
Indicators on the main unit
Remote control
4
4
5
5
6
7
Connectors
Wireless speakers
Wireless subwoofer
3 Connect and set up
Charge speakers
7
7
8
8
9
Pair up with speakers/subwoofer
Place speakers
Connect toTV
Connect digital devices through HDMI 10
Connect audio fromTV and other
devices
10
4 Use your SoundBar
Adjust the volume
Choose your sound
MP3 player
11
11
11
12
13
13
13
Play music via Bluetooth
Auto standby
Apply factory settings
5 Wall mount your SoundBar
14
14
Wall mount
6 Product specifications
14
15
7 Troubleshooting
EN
1
responsibility for improper wall mounting
that results in accident, injury or damage.
Never place the product or any objects
on power cords or on other electrical
equipment.
1 Important
•
•
Read and understand all instructions before you
use your product. If damage is caused by failure
to follow instructions, the warranty does not
apply.
If the product is transported in
temperatures below 5°C, unpack the
product and wait until its temperature
matches room temperature before
connecting it to the power outlet.
Parts of this product can be made of glass.
Handle with care to avoid injury and damage.
•
Safety
Risk of electric shock or fire!
Risk of overheating!
•
Never expose the product and accessories
to rain or water. Never place liquid
containers, such as vases, near the product.
If liquids are spilt on or into the product,
disconnect it from the power outlet
immediately. Contact Consumer Care to
have the product checked before use.
Never place the product and accessories
near naked flames or other heat sources,
including direct sunlight.
•
Never install this product in a confined
space.Always leave a space of at least four
inches around the product for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the product.
Risk of contamination!
•
Do not mix batteries (old and new or
carbon and alkaine, etc.).
•
•
Danger of explosion if batteries are
incorrectly replaced. Replace only with the
same or equivalent type.
•
•
Never insert objects into the ventilation
slots or other openings on the product.
Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
•
•
Remove batteries if they are exhausted or
if the remote control is not to be used for
a long time.
Batteries contain chemical substances, they
should be disposed of properly.
•
•
Disconnect the product from the power
outlet before lightning storms.
When you disconnect the power cord,
always pull the plug, never the cable.
Risk of swallowing batteries!
•
The product/remote control may contain
a coin/button type battery, which can be
swallowed. Keep the battery out of reach
of children at all times! If swallowed, the
battery can cause serious injury or death.
Severe internal burns can occur within two
hours of ingestion.
Risk of short circuit or fire!
•
Before you connect the product to the
power outlet, ensure that the power
voltage matches the value printed on the
back or bottom of the product. Never
connect the product to the power outlet if
the voltage is different.
•
•
If you suspect that a battery has been
swallowed or placed inside any part of the
body, seek immediate medical attention.
When you change the batteries, always
keep all new and used batteries out of
reach of children. Ensure that the battery
compartment is completely secure after
you replace the battery.
Risk of injury or damage to the SoundBar!
•
For wall-mountable products, use only the
supplied wall mount bracket. Secure the
wall mount to a wall that can support the
combined weight of the product and the
wall mount.WOOX Innovations bears no
2
EN
•
If the battery compartment cannot be
completely secured, discontinue use of the
product. Keep out of reach of children and
contact the manufacturer.
negative consequences for the environment and
human health.
Removing the disposable batteries
To remove the disposable batteries, see battery
installation section.
Compliance
This is CLASS II apparatus with double
insulation, and no protective earth provided.
Care for your product
This product complies with the radio
interference requirements of the European
Community.
Use only microfiber cloth to clean the product.
Hereby,WOOX Innovations, declares that this
product is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC.
A copy of the EC declaration of Conformity
is available in the Portable Document
Format (PDF) version of the user manual at
Care of the environment
Disposal of your old product and battery
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Help and support
For extensive online support, visit
•
•
•
download the user manual and the quick
start guide
watch video tutorials (available only for
selected models)
find answers to frequently answered
questions (FAQs)
This symbol on a product means that the
product is covered by European Directive
2012/19/EU.
•
•
email us a question
chat with our support representative.
This symbol means that the product contains
batteries covered by European Directive
2013/56/EU which cannot be disposed of with
normal household waste.
Inform yourself about the local separate
collection system for electrical and electronic
products and batteries. Follow local rules and
never dispose of the product and batteries
with normal household waste. Correct disposal
of old products and batteries helps prevent
Follow the instructions on the website to select
your language, and then enter your product
model number.
Alternatively, you can contact Consumer Care
in your country. Before you contact, note down
the model number and serial number of your
product.You can find this information on the
back or bottom of your product.
EN
3
c HDMI 1
Lights up when you select HDMI IN 1 as
the input source.
2 Your SoundBar
d HDMI 2
Congratulations on your purchase, and
welcome to Philips!To fully benefit from
the support that Philips offers, register your
Lights up when you select HDMI IN 2 as
the input source.
e OPTICAL/COAX
•
Lights up when you switch to optical
or coaxial input source.
•
Blinks when an unsupported audio
format is detected.
Indicators on the main unit
This section describes the information of the
LED indicators on the main unit.
f AUX
Lights up when you switch to AUX input
source.
g AUDIO-IN
Lights up when you switch to AUDIO-IN
source (3.5mm jack).
a
h Bluetooth
•
Lights up when you switch to
Bluetooth mode and Bluetooth devices
are paired.
Blinks when you switch to Bluetooth
mode and Bluetooth devices are not
paired.
b
c
d
e
f
g
h
i
j
•
a Volume indicator
•
When you change volume, one
or multiple indicators (up to eight
indicators) light up to indicate the
volume level.
i V. SURR indicator
•
Lights up when surround mode is
selected.
•
•
Off when stereo mode is selected.
Blinks once when night mode/auto
volume is enabled.
Wireless pairing indicators
•
During wireless pairing between the
main unit and the surround speakers,
eight indicators blink one by one.
When the pairing succeeds, eight
indicators light up for three seconds.
If the pairing fails, eight indicators blink
three times.
•
•
•
Blinks twice when Dolby Digital audio
is input.
Blinks twice when night mode/auto
volume is disabled.
Blinks three times when DTS audio is
input.
•
•
b HDMI ARC
j
(Standby-On/Standby indicator)
When the SoundBar is in standby, the
standby indicator turns red.
•
Lights up when you select HDMI ARC
as the input source.
•
Blinks when no audio from the
selected HDMI ARC source is
detected, or when an unsupported
audio format is detected.
4
EN
c Source buttons
Remote control
OPTICAL: Switch your audio source to
the optical connection.
This section includes an overview of the
remote control.
COAX: Switch your audio source to the
coaxial connection.
AUDIO-IN: Switch your audio source to
the AUDIO-In connection (3.5mm jack).
AUX: Switch your audio source to the
AUX connection.
a
b
Bluetooth: Switch to Bluetooth mode.
d NIGHT MODE ON/OFF
Turn night mode on or off.
c
Bluetooth
e Volume control
+/-: Increase or decrease volume.
: Mute or restore volume.
f V.SURR
•
Toggle between stereo and virtual
surround sound.
In HDMI-in mode (connected via
HDMI IN 1 or HDMI IN 1), press and
hold to switch audio output through
the SoundBar speaker orTV speaker.
j
i
d
e
•
h
g
g BASS +/-
Increase or decrease bass.
h TREBLE +/-
Increase or decrease treble.
f
i AUDIO SYNC +/-
Increase or decrease audio delay.
j AUTOVOLUME ON/OFF
Turn auto volume on or off.
a
(Standby-On)
•
•
Switch the SoundBar on or to standby.
When EasyLink is enabled, press
and hold for at least three seconds
to switch all connected HDMI CEC
compliant devices to standby.
Connectors
This section includes an overview of the
connectors available on your SoundBar.
b HDMI selection
HDMI ARC: Switch your source to HDMI
ARC connection.
HDMI 1: Switch your source to the HDMI
IN 1 connection.
HDMI 2: Switch your source to the HDMI
IN 2 connection.
EN
5
Rear connectors
Wireless speakers
The SoundBar comes with 2 wireless surround
speakers (left and right).
POWER ON
a
b
c
d e f
g
h
b
c
a
*The illustration above is for the right speaker's
top view and bottom view.
a AC MAINS~
Connect to the power supply.
a Speaker indicator
b TOTV-HDMI OUT (ARC)
•
During wireless pairing between the
main unit and the speaker, the indicator
blinks red quickly.
Connect to the HDMI (ARC) input on the
TV.
•
When the pairing succeeds, the
indicator turns into solid white
(undocked from the main unit), or the
indicator lights up white 30 seconds
then fades off (being docked into the
main unit).
When the pairing fails or pairing
remains undone, the indicator blinks
red slowly.
When the speaker is being charged
(docked into the main unit), the
indicator lights up amber.
When the speaker goes to standby, the
indicator blinks amber.
c HDMI IN 2
Connect to the HDMI output on a digital
device.
d HDMI IN 1
Connect to the HDMI output on a digital
device.
•
•
•
e DIGITAL IN-OPTICAL
Connect to an optical audio output on the
TV or a digital device.
f DIGITAL IN-COAXIAL
Connect to a coaxial audio output on the
TV or a digital device.
g AUDIO IN-AUX
b Connection key
Connect to an analog audio output on the
TV or an analog device.
Press with a pin to enter the pairing mode
for the speaker.
h AUDIO-IN
c POWER ON
Audio input from, for example, an
MP3 player (3.5mm jack).
Press to turn on the wireless speaker if it
automatically goes to standby.
6
EN
3 Connect and set
up
Wireless subwoofer
The SoundBar comes with a wireless subwoofer.
This section helps you connect your SoundBar
to aTV and other devices, and then set it up.
For information about the basic connections of
your SoundBar and accessories, see the quick
start guide.
Note
• For identification and supply ratings, see the type plate
at the back or bottom of the product.
• Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.
a CONNECT
Press to to enter the pairing mode for the
subwoofer.
Charge speakers
b Subwoofer indicator
•
When the power is turned on, the
If the wireless surround speaker is undocked
from the main unit, its battery level is indicated
by the indicator on the speaker.
indicator lights up.
•
During wireless pairing between the
subwoofer and the main unit, the
indicator blinks white quickly.
When the pairing succeeds, the
indicator lights up white.
•
•
Light up white: full battery
Light up red: low battery level (less than
30% remaining)
•
•
•
Flash red: near empty (less than 10%
remaining)
When the pairing fails, the indicator
blinks white slowly.
c AC MAINS~
Connect to the power supply.
1 Dock your speakers onto the main unit to
charge the speakers.
2 Turn on the main unit.
» During charging, the indicator on the
speaker lights up amber.
» When fully charged, the indicator
on the speaker lights up white for
30 seconds.
EN
7
5 Repeat the steps above to pair up the
Note
other surround speaker with the main unit.
• It may take around 2 hours to fully charge the speakers.
• If the charging lasts more than 4 hours during standby
of the main unit, the speakers automatically switch to
standby.
Pair up with the subwoofer
1 Turn on the SoundBar and the subwoofer.
» If the connection to the SoundBar is
lost, the indicator on the subwoofer
blinks white slowly.
Pair up with speakers/
subwoofer
2 Press the CONNECT button on the
subwoofer to enter the pairing mode.
» The indicator on the subwoofer blinks
white quickly.
The wireless speakers and subwoofer
automatically pair up with the SoundBar for
wireless connection when you turn on the
SoundBar, the speakers and the subwoofer.
If no audio from the wireless speakers and
subwoofer can be heard, manually pair up the
speakers and the subwoofer.
3 On the remote control, press AUX, and
then press TREBLE -, BASS + and +
(Volume) within three seconds.
» If the pairing succeeds, the indicator on
the subwoofer lights up white.
» If the pairing fails, the indicator on the
subwoofer blinks white slowly.
Pair up with the speakers
4 If the pairing fails, repeat the steps above.
1 Turn on the SoundBar and the surround
speaker.
» If the connection to the SoundBar is
lost, the indicator on the speaker blinks
red slowly.
Place speakers
For best sound effect, position all the speakers
towards the seating position and place them
close to your ear level (seated).
2 Press the Connection key on the speaker
with a pin to enter the pairing mode.
» The indicator on the speaker blinks red
quickly.
3 On the remote control, press AUX, and
then press TREBLE -, BASS + and +
(Volume) within three seconds.
» If the pairing succeeds, the indicator on
the speaker lights up white (undocked
from the main unit), or the indicator
on the speaker lights up white for
30 seconds (being docked into the
main unit).
SUB
WOOFER
» If the pairing fails, the indicator on the
speaker blinks red slowly.
4 If the pairing fails, repeat the steps above.
REAR L
REAR R
8
EN
Note
Connect toTV
• Surround sound depends on factors such as room
shape and size, type of wall and ceiling, windows and
reflective surfaces, and speaker acoustics. Experiment
with the speaker positions to find the optimum setting
for you.
Connect your SoundBar to aTV.You can listen
to audio fromTV programs through your
SoundBar. Use the best quality connection
available on your SoundBar andTV.
Follow these general guidelines for speakers
placement.
Connect toTV through HDMI (ARC)
1 Seating position:
Your SoundBar supports HDMI with Audio
Return Channel (ARC). If yourTV is HDMI ARC
compliant, you can hear theTV audio through
your SoundBar by using a single HDMI cable.
This is the center of your listening area.
2 Place the SoundBar in front of the seating
position.
3 REAR L (rear left) and REAR R (rear right)
surround speakers:
Place the rear surround speakers to the
left and right side of your seating position,
either in line with it or slightly behind it.
TV
4 SUBWOOFER (subwoofer):
Place the subwoofer at least one meter
to the left or right of theTV. Leave about
10-centimeter clearance from the wall.
1 Using a High Speed HDMI cable, connect
the HDMI OUT (ARC) connector on your
SoundBar to the HDMI ARC connector
on theTV.
Dock the surround speakers
You can also dock your surround speakers onto
the main unit to listen to audio, for example,
watchingTV shows and news.
•
The HDMI ARC connector on theTV
might be labeled differently. For details,
see theTV user manual.
2 On yourTV, turn on HDMI-CEC
operations. For details, see theTV user
manual.
Note
• If yourTV has a DVI connector, you can use an HDMI/
DVI adapter to connect toTV. However, some of the
features may not be available.
EN
9
Option 1: Connect audio through a
digital optical cable
Connect digital devices
through HDMI
Best quality audio
Connect a digital device such as a set-top box,
DVD/Blu-ray player, or games console to your
SoundBar through a single HDMI connection.
When you connect the devices in this way and
play a file or game, the
TV
•
video is automatically displayed on your
TV, and
•
audio is automatically played on your
SoundBar.
1 Using an optical cable, connect the
OPTICAL connector on your SoundBar to
the OPTICAL OUT connector on theTV
or other device.
1 Using a High Speed HDMI cable, connect
the HDMI OUT connector on your digital
device to the HDMI IN 1/2 on your
SoundBar.
•
The digital optical connector might be
labeled SPDIF or SPDIF OUT.
2 Connect your SoundBar toTV through
HDMI OUT (ARC).
Option 2: Connect audio through a
digital coaxial cable
•
If theTV is not HDMI CEC compliant,
select the correct video input on your
TV.
Good quality audio
3 On the connected device, turn on HDMI-
CEC operations. For details, see the user
manual of the device.
Connect audio fromTV and
other devices
Play audio fromTV or other devices through
your Soundbar speakers.
Use the best quality connection available on
yourTV, Soundbar, and other devices.
1 Using a coaxial cable, connect the
COAXIAL connector on your SoundBar
to the COAXIAL/DIGITAL OUT
connector on theTV or other device.
•
The digital coaxial connector might be
Note
labeled DIGITAL AUDIO OUT.
• When your Soundbar andTV are connected through
HDMI ARC, an audio connection is not required.
10 EN
Option 3: Connect audio through
analog audio cables
4 Use your
SoundBar
Basic quality audio
1 Using an analog cable, connect the AUX
connectors on your SoundBar to the
AUDIO OUT connectors on theTV or
other device.
This section helps you use the SoundBar to play
audio from connected devices.
Before you start
•
Make the necessary connections described
in the quick start guide and the user
manual.
DVD
•
Switch the SoundBar to the correct source
for other devices.
Adjust the volume
1 Press +/- (Volume) to increase or decrease
a volume level.
•
•
To mute sound, press (Mute).
To restore the sound, press (Mute)
again or press +/- (Volume).
Volume indicator
• When you change volume, one or multiple
Volume indicator (up to 8 indicators) on
the main unit light up to indicate a volume
level.The more indicators light up, the
higher the volume level is.
0
45
•
If you do not press the volume key for five
seconds, the volume indicators light off, and
the current source indicator and the sound
mode indicator light up.
Choose your sound
This section helps you choose the ideal sound
for your video or music.
EN 11
Surround sound mode
Synchronize picture and sound
Experience an immersive audio experience with
surround sound modes.
If the audio and video are not synchronized,
delay the audio to match the video.
1 Press V.SURR to select a surround mode.
1 Press AUDIO SYNC +/- to synchronize
•
Surround: Creates a surround listening
experience.The V.SURR indicator on
the main unit lights up.
the audio with the video.
•
AUDIO SYNC + increases the sound
delay, and AUDIO SYNC - decreases
the sound delay.
•
Stereo:Two-channel stereo sound.
Ideal for listening to music.
» When you change the value of sound
delay, the more value/delay you set,
the more indicators on the main unit
light up.
Equalizer
Change the high frequency (treble) and low
frequency (bass) settings of the SoundBar.
Night mode
1 Press TREBLE +/- or BASS +/- to change
the frequency.
For quiet listening, decrease the volume of loud
sounds when audio is played. Night mode is
only available for Dolby Digital soundtracks.
Treble/bass indicator
•
When you change frequency levels, one
or multiple indicator (up to 8 indicators)
on the main unit light up to indicate a
frequency level.The more indicators light
up, the more the treble or bass is.
1 Press NIGHT MODE ON/OFF to turn
night mode on or off.
» When night mode is turned on, the
V.SURR indicator blinks once.
» When night mode is turned off, the
-4
4
V.SURR indicator blinks twice.
Note
• If auto volume is set to turned on, you cannot enable
the night mode.
Auto volume
Turn the auto volume on to keep the volume
constant when you switch to a different source.
It also compresses the sound dynamics,
increasing the volume for quiet scenes and
decreasing the volume for loud scenes.
MP3 player
Connect your MP3 player to play your audio
files or music.
1 Press AUTOVOLUME ON/OFF to turn
auto volume on or off.
What you need
» When auto volume is turned on, the
V.SURR indicator blinks once.
•
•
An MP3 player.
A 3.5mm stereo audio cable.
» When auto volume is turned off, the
V.SURR indicator blinks twice.
1 Using the 3.5mm stereo audio cable,
connect the MP3 player to the AUDIO-IN
connector on your SoundBar.
2 Press AUDIO-IN.
12 EN
3 Press the buttons on the MP3 player to
5 To exit Bluetooth, select other source.
select and play audio files or music.
•
When your switch back to Bluetooth
mode, Bluetooth connection remains
active.
•
On the MP3 player, it is recommended
to set the volume in the range of 80%
maximum volume.
Note
• The music streaming may be interrupted by obstacles
between the device and SoundBar, such as wall, metallic
casing that covers the device, or other devices nearby
that operate in the same frequency.
• If you want to connect your SoundBar with another
Bluetooth device, disable the currently connected
Bluetooth device.
Play music via Bluetooth
Through Bluetooth, connect the SoundBar with
your Bluetooth device (such as an iPad, iPhone,
iPod touch,Android phone, or laptop), and then
you can listen to the audio files stored on the
device through your SoundBar speakers.
What you need
•
A Bluetooth device which supports
Bluetooth profile A2DP, and with Bluetooth
version as 2.1 + EDR.
The operational range between the
SoundBar and a Bluetooth device is
approximately 10 meters (30 feet).
Auto standby
When playing media from a connected device,
the SoundBar automatically switches to standby
if:
•
•
•
no button is pressed for 15 minutes, and
no audio/video playback is detected from a
connected device.
1 Press Bluetooth on the remote control to
switch the SoundBar to Bluetooth mode.
» The Bluetooth indicator blinks.
2 On the Bluetooth device, switch on
Bluetooth, search for and select Philips
HTL9100 to start connection (see the
user manual of the Bluetooth device on
how to enable Bluetooth).
Apply factory settings
You can reset your SoundBar to the default
settings programmed at the factory.
1 In AUX mode, press and hold NIGHT
» During connection, the Bluetooth
indicator blinks.
MODE OFF for 5 seconds.
» When the factory settings restore is
complete, the SoundBar automatically
switches off and restarts.
3 Wait until you hear a beep sound from the
SoundBar.
» The Bluetooth indicator lights up.
» If the connection fails, the Bluetooth
indicator blinks continually.
4
Select and play audio files or music on
your Bluetooth device.
•
During play, if a call is coming, music
play is paused. Play resumes when the
call ends.
•
If music streaming is interrupted, place
the Bluetooth device closer to the
Soundbar.
EN 13
5 Wall mount
your SoundBar
6 Product
specifications
Note
read all safety precautions. (see 'Safety' on page
2)
• Specifications and design are subject to change without
notice.
Wall mount
Amplifier
•
Total output power:
Note
210W RMS (+/- 0.5 dB, 30%THD) /
168W RMS (+/- 0.5 dB, 10%THD)
Frequency response: 20 Hz-20 kHz / ±3 dB
Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
• You must detach the surround speakers from the main
unit before wall mounting or un-mounting.
• Improper wall mounting may result in accident, injury or
damage. If you have any query, contact Consumer Care
in your country.
• Secure the wall mount to a wall that can support the
combined weight of the product and the wall mount.
• Before wall mount, you need not remove the four
rubber feet at the bottom of the soundbar, otherwise
the rubber feet cannot be fixed back.
•
•
•
Input sensitivity:
•
•
AUX: 400 mV
AUDIO-IN: 220 mV
Audio
Screw length/diameter
Depend on the type of wall mounting this wall
mount bracket, make sure that you use screws
of a suitable length and diameter.
•
S/PDIF Digital audio input:
•
•
Coaxial: IEC 60958-3
Optical:TOSLINK
Bluetooth
•
•
Bluetooth profiles:A2DP
Bluetooth version: 2.1 + EDR
3 - 3.5mm
Main unit
•
•
•
•
Power supply: 110-240V~, 50/60 Hz
> 25mm
Power consumption: 50 W
Standby power consumption: ≤ 0.5 W
Speaker impedance:
For information about how to wall your
SoundBar, see the wall mount guide.
•
•
Woofer: 8 ohm
tweeter: 8 ohm
•
Speaker drivers: 2 x 63.5 mm (2.5") woofer
+ 2 x 25.4 mm (1") tweeter
Dimensions (WxHxD):
•
1035 x 73 x 156 mm (with 2 surround
speakers attached)
•
Weight: 3.9 kg
14 EN
Surround speakers
7 Troubleshooting
•
•
Speaker impedance: 8 ohm
Speaker drivers: 2 x 63.5 mm (2.5") full
range
Warning
•
•
Dimensions (WxHxD):
191 x 73 x 156 mm
Weight: 0.7 kg/each
• Risk of electric shock. Never remove the casing of the
product.
To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, check
the following points before you request service.
If you still have a problem, get support at
Subwoofer
•
•
•
•
•
•
Power supply: 110-240V~, 50/60 Hz
Power consumption: 30 W
Standby power consumption: ≤ 0.5 W
Impedance: 4 ohm
Speaker drivers: 1 x 165 mm (6.5") woofer
Dimensions (WxHxD):
Main unit
200 x 510 x 201 mm
Weight: 4.9 kg
The buttons on the SoundBar do not work.
•
•
Disconnect the SoundBar from the power
supply for a few minutes, then reconnect.
Wall mount
Sound
•
Dimensions (WxHxD):
40 x 100 x 26.5 mm
Weight: 0.1 kg/each
No sound from SoundBar speakers.
•
•
Connect the audio cable from your
SoundBar to yourTV or other devices.
However, you do not need a separate
audio connection when:
Remote control batteries
•
2 x AAA-R03-1.5V
•
the SoundBar andTV are connected
through HDMI ARC connection, or
a device is connected to the HDMI IN
connector on your SoundBar.
•
Standby information
•
When the product remains inactive for
15 minutes, it automatically switches to
standby or networked standby.
The power consumption in standby or
networked standby is less than 0.5W.
To deactivate Bluetooth connection, press
and hold the Bluetooth button on the
remote control.
To activate Bluetooth connection, enable
Bluetooth connection on your Bluetooth
device, or enable Bluetooth connection via
the NFC tag (if available).
•
•
Reset your SoundBar to its factory settings.
On the remote control, select the correct
audio input.
•
•
•
Make sure that the SoundBar is not muted.
No sound from the wireless surround
speakers.
•
main unit (see 'Pair up with the speakers'
•
•
Dock the wireless surround speakers into
the main unit to charge the battery.
EN 15
No sound from the wireless subwoofer.
•
main unit (see 'Pair up with the subwoofer'
Distorted sound or echo.
•
If you play audio from theTV through the
SoundBar, make sure that theTV is muted.
Audio and video are not synchronized.
•
Press AUDIO SYNC +/- to synchronize
the audio with the video.
Bluetooth
A device cannot connect with the SoundBar.
•
The device does not support the
compatible profiles required for the
SoundBar.
•
You have not enabled the Bluetooth
function of the device. See the user manual
of the device on how to enable the
function.
•
•
The device is not correctly connected.
Connect the device correctly.
The SoundBar is already connected with
another Bluetooth device. Disconnect the
connected device, then try again.
Quality of audio play from a connected
Bluetooth device is poor.
•
The Bluetooth reception is poor. Move the
device closer to the SoundBar, or remove
any obstacle between the device and the
SoundBar.
The connected Bluetooth device connects and
disconnects constantly.
•
The Bluetooth reception is poor. Move the
device closer to the SoundBar, or remove
any obstacle between the device and the
SoundBar.
•
•
Turn off Wi-Fi function on the Bluetooth
device to avoid interference.
For some Bluetooth, the Bluetooth
connection can be deactivated
automatically to save power.This does not
indicate any malfunction of the SoundBar.
16 EN
WOOX Innovations Netherlands B.V.
HK-WK1437-HTL9100
2014/09
(Document No. / Numéro du document)
(yyyy/mm in which the CE mark is affixed / aaaa/mm
au cours de laquelle le marquage CE a été apposé)
EUROPEAN DECLARATION OF CONFORMITY
(DECLARATION DE CONFORMITE CE)
We, WOOX INNOVATIONS NETHERLANDS B.V.
(Company name / Nom de l’entreprise)
Building SFH4, Kastanjelaan 400, 5616 LZ Eindhoven, The Netherlands
(address / adresse)
declare under our responsibility that the product(s):
(déclarons sous notre propre responsabilité que le(s) produit(s))
PHILIPS
HTL9100/12
(brand name, nom de la marque)
SoundBar Speaker
(product description, description du produit)
(Type version or model, référence ou modèle)
to which this declaration relates is in conformity with the following harmonized standards:
(auquel cette déclaration se rapporte, est conforme aux normes harmonisées suivantes)
EN 60065:2002+A1(2006)+A11(2008)+A2(2010)+A12(2011)
EN 301489-1 V1.9.2 (2011)
EN 301489-17 V2.1.1 (2012)
V1.4.1(2002)
EN 300328 V1.8.1 (2012)
V1.6.1(2010)
EN301489-3
EN300440-1
EN300440-2
V1.4.1(2010)
EN 55013:2001+A1(2003)+A2(2006)
EN 55020:2007+A11(2011)
EN55022:2010
EN 62479:2010
EN 50564:2011
EN 50581:2012
following the provisions of:
(conformément aux exigences essentielles et autres dispositions pertinentes de:)
1999/5/EC
2006/95/EC
2004/108/EC
2011/65/EU
2009/125/EC -- EC/1275/2008, EU/801/2013
And are produced under a quality scheme at least in conformity with ISO 9001 or CENELEC Permanent Documents
(Et sont fabriqués conformément à une qualité au moins conforme à la norme ISO 9001 ou aux Documents Permanents CENELEC)
Only for R&TTE products:
Telefication / 0560
(Name and number/ nom et numéro)
Expert Opinion
The Notified Body:
(L’Organisme Notifié)
performed:
(a effectué)
132114018/AA/01
(certificate number / numéro du certificat)
and issued the certificate:
(et a délivré le certificat)
Eindhoven, 11.09.2014
Matthias Pyroth, Director of Consumer Care
(place,date / lieu, date)
(signature, name and function / signature, nom et fonction)
Specifications are subject to change without notice
2014 © WOOX Innovations Limited.All rights reserved.
Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V.
and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V.
HTL9100_12_UM_V5.0
|