Quick use guide
LX9000R
0
4
1
!
5
!
9
2
6
3
7
8
@
@
!
#
!
General information
Supplied accessories
This Quick use guide gives a rough overview and helps
to quickly start with basic steps. Please read the supplied
user´s manual for detailed information.
1 2 batteries for the remote control, type AA
2 1 remote control
3 1 blank DVD+RW disc
4 1 SCART cable
5 1 cinch audio cable
6 1TV antenna cable
7 1 FM antenna cable
8 1 MW loop antenna
9 1 AC mains cable
0 7 speaker cables with colour coded ends
! 2 front speakers and 2 rear speakers
@ 2 subwoofers integrated in the speaker stands
# 1 centre speaker
1
Quick use guide
LX9000R
FM ANTENNA
ANTENNA IN
EXT IN
AM ANTENNA
O
MAINS ~
MW
FM
TV ANTENNA
EXT
2
LINE IN
1
LINE IN
2
LINE OUT
DIGITAL OUT
IN
AUX I/0
L
L
R
TV OUT
TO TV I/0
DIGITAL IN
TV ANTENNA
OPTICAL IN
Make sure all
other connections
have been made
before connecting
the mains cable to
AC MAINS ~ and
to the wall socket.
DIGITAL OUT
DIGITAL IN
TO TV
EXT. IN
TV OUT
ANTENNA
TO TV
OPTICAL
OUT
Connections
3 If necessary set theTV to the correct audio/video channel
for the DVD recorder system. Such channels may be called
AUX or AUXILIARY IN,AUDIO/VIDEO or A/V IN, EXT1,
EXT2 or EXTERNAL IN, etc.These channels are often near
channel 00.
Scart inputs/outputs of your other appliances can be
named:
– TOTV/MONITOR, EURO-AV OUT,…
– AUX, EXT, I/0, EURO-AV IN,…
Note: If yourTV supports EasyLink, theTV and the DVD
recorder system exchange information via the SCART cable.
In this case, EasyLink loading data fromTV, please
wait will appear on theTV. Some of the following settings will
be done automatically then.
Initial installation
When you connect the DVD recorder system to the mains
supply for the first time, you need to perform some basic
settings. Please observe theTV screen and the display of
the DVD recorder system.
4
5
➜ The menu Menu Language appears on theTV screen.
1 Switch on yourTV.
Press 3 or 4 to select the language in which the display
messages should appear on theTV screen.Then press OK.
2 Connect the supplied mains cable to AC MAINS ~ and to
the wall socket. If the DVD recorder system is in demo
mode, press 2 to cancel the demo mode.
➜ The menu Audio language appears.
➜ IS TV ON? is displayed on the DVD recorder system.
Press 3 or 4 to select the language in which DVDs should
preferably be played, if the language is available on the disc.
Then press OK.
3
Quick use guide
LX9000R
6
➜ The menu Subtitle Language appears.
10 Press SYSTEM MENU.
➜ CONTINUE WITH SPECIAL AUDIO SETTINGSis
Press 3 or 4 to select the language in which subtitles
should preferably be displayed, if subtitles in the language
are available on the disc.Then press OK.
scrolled on the DVD recorder system.
Next, you will be asked
– about the distances between the speakers and your
preferred listening position and
– to which socket you connected yourTV and other
appliances.
Note: Some DVDs may override your audio and subtitle
language selection. In this case, you have to select the audio
and subtitle language in the DVDs Disc Menu.
7
➜ The menu TV Shape appears.
11 If you want to continue with these advanced settings:
Press OK. For details, see “Advanced settings” on page 17 in
the user´s manual.
Press 3 or 4 to select the screen format.This setting will
have an effect only with DVDs supporting different screen
formats.
➜ 4:3 letterbox: for a wide-screen picture (cinema
format) on a conventional 4:3TV set with black borders
at the top and bottom of the screen.
➜ 4:3 panscan: for a full-height picture with cropped
edges.
If you do not want to continue, the standard settings
below will be used for the speaker distances and the
connections:
Press 4 to select NO, then press OK to confirm.
➜ AUTOINSTALLis displayed.The DVD recorder system
searches for available radio stations and stores them in its
memory.
➜ 16:9: for a wide-screenTV set.
Then press OK.
➜ After the search INSTALLATION COMPLETEis
scrolled and a radio station is played.The DVD recorder
system is ready to play.
8
9
➜ The menu Country appears.
Press 3 or 4 to select the country where the
DVD recorder system is used. If your country does not
appear, select Other.Then press OK.
Standard settings for the speaker distances and
the connected appliances
To change these settings later on, see “When adding
appliances or changing the connections of appliances” and
“When changing the speaker setup” in the user´s manual.
➜ If you have connected the antenna - press OK
appears.
If you connected the DVD recorder system to a
TV antenna or a cableTV system, press OK.
If not, connect the antenna as described in “Connecting the
TV antenna”, then press OK.
➜ Autoinstall appears and the automatic search for
TV channels starts.This may take several minutes.As soon
as the search is complete, Autoinstall complete
appears.
3 m
3 m
3 m
1.5 m
1.5 m
appliance
TV
satellite receiver
VCR (video recorder)
game console
CD player
is connected to
EXT 1TOTV I/O
EXT 2 AUX I/O
EXT 2 AUX I/O
EXT 2 AUX I/O
DIGITAL IN
CD recorder
tape deck
LINE IN 1
LINE IN 2
Note:The satellite receiver,VCR and game console are
connected in a “chain”. See illustration on the page to the left.
4
Quick use guide
LX9000R
Discs for playback and recording
Playback
– DVD+R
1 Press OPEN/CLOSE / on the set to open the drawer and
can be recorded once and played
on standard DVD players and
DVD recorders, if finalised.
insert a disc (printed side up) in the tray.
2 Press OPEN/CLOSE / on the set again. If necessary, press
PLAY/PAUSEÉÅ to start playback.
– DVD+RW
0
0
To interrupt playback, press PLAY/PAUSEÉÅ.
can be recorded, erased and
re-recorded many times and played on
DVD+RW compatible DVD players
and DVD recorders if finalised.
To resume playback, press PLAY/PAUSEÉÅ again.
3 To stop playback press STOP.
Selecting a source
G
Turn SOURCE on the DVD recorder system or keep a
source key on the remote control pressed for 1 second to
select either:
Discs for playback only
Discs with the following logos can be played:
–
–
the disc in the DVD recorder system
o
MONITOR: the internalTV tuner of the DVD
recorder system (only selectable by pressing
DVD/MON on the remote control)
l
–
–
–
–
–
–
–
–
e
m
n
i
TV: theTV
CAM1: a camcorder connected to CAM 1
CAM2: a camcorder connected to CAM 2
SAT: a connected satellite receiver
VCR: a connectedVCR (video recorder)
GAME: a connected game console
the radio tuner of the DVD recorder system
j
r
f
TAPE: a connected tape deck or similar audio
k
recording appliance
–
–
CDR: a connected CD recorder
p
q
CD: a connected CD player/changer
➜ The sound of the source is played on the DVD recorder
system.
Note: If SOURCE NOT AVAILABLEis scrolled please read
“When adding appliances or changing the connections of
appliances” in the user´s manual.
5
Quick use guide
LX9000R
Selecting a recording mode
Recording from other appliances
G
Before recording, press REC MODE repeatedly to select
the desired recording mode:
1 Switch yourTV set on. If necessary set theTV to the
correct audio/video channel for the DVD recorder system.
Such channels may be called AUX or AUXILIARY IN,
AUDIO/VIDEO or A/V IN, EXT1, EXT2 or EXTERNAL IN,
etc.These channels are often near channel 00.
mode
HQ
SP
SP+
LP
quality
better than DVD
DVD
better than S-VHS
S-VHS
better thanVHS
VHS
recording time
60 minutes
120 minutes
150 minutes
180 minutes
240 minutes
360 minutes
2 Load a disc on which you want to record in the tray.
3 Press on the remote control either:
EP
EP+
SAT: to record from a connected satellite receiver.
CAM1/2: to record from a connected video camera. Press
the button repeatedly to toggle between camera 1
(analogue input) and camera 2 (digital i.Link input).
VCR/GAME: to record from a connected video cassette
recorder or a game console. Press the button repeatedly to
toggle between video cassette recorder and game console.
Recording aTV programme with
safe record
1 Switch yourTV set on. If necessary set theTV to the
correct audio/video channel for the DVD recorder system.
Such channels may be called AUX or AUXILIARY IN,
AUDIO/VIDEO or A/V IN, EXT1, EXT2 or EXTERNAL IN,
etc.These channels are often near channel 00.
4 Press RECORD on the DVD recorder system or REC/OTR
on the remote control to start recording.
Note: Recordings on a DVD+RW disc are started from the
current position. From there on, earlier recordings may be
overwritten without notice, unless the disc is write protected.
2 Load a DVD+R disc or DVD+RW disc on which you want
to record in the tray.
3 Press DVD/MON on the remote control as often as
0
0
To interrupt recording press PLAY/PAUSEÉÅ.
necessary to see the currently selectedTV channel.
To resume recording press PLAY/PAUSEÉÅ again.
4 Press CH+ or CH- on the remote control as often as
necessary to select the desiredTV channel (programme
number) from which you wish to record.
5 Press STOP 9 to stop recording.
5 Keep REC/OTR on the remote control pressed until
SAFE RECOis displayed.
6 Press STOP 9 to stop recording.
3103 306 1952.1
VieChr0317
|