Philips Portable DVD Player PET7432
2
Enjoy
Quick start guide
2 Connect the AC adaptor cable to the DC
IN Jack on the main unit and the power
outlet.
1
Prepare (for in-car use)
1 Attach the main unit and the second screen
to the back of the front seat headrests.
2 Connect the supplied AV cable to the AV
OUT jack on the main unit and the AV IN
jack on the second screen.
TV
Not supplied
White
Red
1 Slide the ON/OFF switch to ON to switch
on the main unit.
2 Slide OPEN 2 on the main unit.
Yellow
3 Connect the supplied car adaptor cable to
the DC IN jacks on the main unit and the
second screen, and to the car cigarette
lighter socket.
3 Remove the protective card (if any) and load
a disc with the label side facing up.
4 Close the disc compartment.
➜ Playback will start automatically. If not,
press 2;/OK.
Main unit
Second screen
AV cable
3 Switch on the TV and set to the correct
video-in channel.
5 To stop playback, press 9.
Note:
During play, you can:
➜ You can consult the owner's manual of
your TV. (If your TV does not have Audio
andVideo inputs, you will need to
purchase a RF modulator. Please consult
your dealer.)
Cigarette
lighter
– Press OPTION to select some play options:
audio, subtitle, repeat, and time display.
– Press BRIGHTNESS on the main unit or
rotate BRIGHTNESS -/+ on the second
screen to adjust brightness of screen to match
lighting conditions.
Car adaptor
cable
Note:
–This portable DVD player is designed with a
built-in lithium battery to supply power to the
player when you are on travel(charging of the
DVD player only possible in the power-off
mode).
1
Prepare (for domestic use)
Connect additional equipment (TV for
example)
1 Connect the AV OUT socket on the main
unit to the video and audio sockets on a TV
as shown directly.
Printed in China
WK0911
|