DISCRETE SEMICONDUCTORS
DATA SHEET
book, halfpage
CGY887
870 MHz, 21.5 dB gain
push-pull amplifier
Product specification
2002 Jun 27
Supersedes data of 2002 June 07
Philips Semiconductors
Product specification
870 MHz, 21.5 dB gain push-pull amplifier
CGY887
CHARACTERISTICS
Bandwidth 40 to 870 MHz; VB = 24 V; Tmb = 35 °C; ZS = ZL = 75 Ω
SYMBOL
PARAMETER
power gain
CONDITIONS
MIN. MAX. UNIT
Gp
f = 45 MHz
21.2
22
0.6
−
−
−
21.8
23
dB
f = 870 MHz
dB
SL
FL
slope straight line
f = 45 to 870 MHz; note 1
f = 45 to 100 MHz
1.4
±0.3
±0.5
±0.3
−
−
−
−
−
−
−
−
−
−
−
−
−
dB
flatness straight line
dB
f = 100 to 800 MHz
dB
f = 800 to 870 MHz
dB
s11
input return losses
f = 45 to 80 MHz
20
20
20
20
19
17
17
21
19
17
16
16
16
16
−45
−
dB
f = 80 to 160 MHz
dB
f = 160 to 320 MHz
dB
f = 320 to 550 MHz
dB
f = 550 to 650 MHz
dB
f = 650 to 750 MHz
dB
f = 750 to 870 MHz
dB
s22
output return losses
f = 45 to 80 MHz
dB
f = 80 to 160 MHz
dB
f = 160 to 320 MHz
dB
f = 320 to 550 MHz
dB
f = 550 to 650 MHz
dB
f = 650 to 750 MHz
dB
f = 750 to 870 MHz
−
dB
s21
phase response
f = 50 MHz
+45
−57
−55
−55
−53
−50
−52
−60
−55
−65
−55
−65
−58
−57
−57
−
deg
dB
CTB
composite triple beat
79 chs flat; Vo = 44 dBmV; fm = 547.25 MHz
112 chs flat; Vo = 44 dBmV; fm = 745.25 MHz
132 chs flat; Vo = 42 dBmV; fm = 859.25 MHz
79 chs flat; Vo = 44 dBmV; fm = 55.25 MHz
112 chs flat; Vo = 44 dBmV; fm = 55.25 MHz
132 chs flat; Vo = 42 dBmV; fm = 55.25 MHz
−
−
−
−
−
−
dB
dB
Xmod
CSO
cross modulation
dB
dB
dB
composite second order 79 chs flat; Vo = 44 dBmV; fm = 548.5 MHz
distortion
dB
CSOsum 112 chs flat; Vo = 44 dBmV; fm = 746.5 MHz −
CSOdif 112 chs flat; Vo = 44 dBmV; fm = 150 MHz
dB
−
dB
CSOsum 132 chs flat; Vo = 42 dBmV; fm = 860.5 MHz −
CSOdif 132 chs flat; Vo = 42 dBmV; fm = 150 MHz
dB
−
−
−
−
64
63
62
dB
d2
second order distortion
output voltage
note 2
dB
note 3
dB
note 4
dB
Vo
dim = −60 dB; note 5
im = −60 dB; note 6
dim = −60 dB; note 7
dBmV
dBmV
dBmV
d
−
−
2002 Jun 27
3
Philips Semiconductors
Product specification
870 MHz, 21.5 dB gain push-pull amplifier
CGY887
SYMBOL
PARAMETER
noise figure
CONDITIONS
MIN. MAX. UNIT
NF
f = 50 MHz
−
−
−
5.5
5
dB
dB
mA
f = 100 MHz to f = 870 MHz
note 8
Itot
total current
consumption (DC)
240
Notes
1. Slope straight line is defined as gain at 870 MHz against gain at 45 MHz.
2. fp = 55.25 MHz; Vp = 60 dBmV;
fq = 493.25 MHz; Vq = 60 dBmV;
measured at fp + fq = 548.5 MHz.
3. fp = 55.25 MHz; Vp = 60 dBmV;
fq = 691.25 MHz; Vq = 60 dBmV;
measured at fp + fq = 746.5 MHz.
4. fp = 55.25 MHz; Vp = 60 dBmV;
fq = 805.25 MHz; Vq = 60 dBmV;
measured at fp + fq = 860.5 MHz.
5. Measured according to DIN45004B:
fp = 540.25 MHz; Vp = Vo;
fq = 547.25 MHz; Vq = Vo −6 dB;
fr = 549.25 MHz; Vr = Vo −6 dB;
measured at fp + fq −fr = 538.25 MHz.
6. Measured according to DIN45004B:
fp = 740.25 MHz; Vp = Vo;
fq = 747.25 MHz; Vq = Vo −6 dB;
fr = 749.25 MHz; Vr = Vo −6 dB;
measured at fp + fq −fr = 738.25 MHz.
7. Measured according to DIN45004B:
fp = 851.25 MHz; Vp = Vo;
fq = 858.25 MHz; Vq = Vo −6 dB;
fr = 860.25 MHz; Vr = Vo −6 dB;
measured at fp + fq −fr = 849.25 MHz.
8. The module normally operates at VB = 24 V, but is able to withstand supply transients up to 30 V.
2002 Jun 27
4
Philips Semiconductors
Product specification
870 MHz, 21.5 dB gain push-pull amplifier
CGY887
PACKAGE OUTLINE
Rectangular single-ended package; aluminium flange; 2 vertical mounting holes;
2 x 6-32 UNC and 2 extra horizontal mounting holes; 7 gold-plated in-line leads
SOT115J
D
E
Z
p
A
2
1
2
3
5
7
8
9
A
L
F
S
W
e
b
M
w
y
c
e
1
d
q
y
M
B
2
U
Q
2
B
q
M
B
1
y
M
B
p
U
q
1
0
5
10 mm
scale
DIMENSIONS (mm are the original dimensions)
U
A
d
max.
A
max.
D
max.
E
max.
L
min.
Q
max.
Z
max.
1
2
UNIT
e
e
p
q
W
w
y
b
c
F
q
q
S
U
1
1
2
2
max.
max.
4.15
3.85
0.51
0.38
6-32
UNC
mm 20.8 9.1
0.25 27.2 2.54 13.75 2.54 5.08 12.7 8.8
2.4 38.1 25.4 10.2 4.2 44.75
8
0.25 0.1 3.8
REFERENCES
EUROPEAN
PROJECTION
OUTLINE
VERSION
ISSUE DATE
IEC
JEDEC
EIAJ
99-02-06
SOT115J
2002 Jun 27
5
Philips Semiconductors
Product specification
870 MHz, 21.5 dB gain push-pull amplifier
CGY887
DATA SHEET STATUS
PRODUCT
DATA SHEET STATUS(1)
STATUS(2)
DEFINITIONS
Objective data
Development This data sheet contains data from the objective specification for product
development. Philips Semiconductors reserves the right to change the
specification in any manner without notice.
Preliminary data
Qualification
This data sheet contains data from the preliminary specification.
Supplementary data will be published at a later date. Philips
Semiconductors reserves the right to change the specification without
notice, in order to improve the design and supply the best possible
product.
Product data
Production
This data sheet contains data from the product specification. Philips
Semiconductors reserves the right to make changes at any time in order
to improve the design, manufacturing and supply. Changes will be
communicated according to the Customer Product/Process Change
Notification (CPCN) procedure SNW-SQ-650A.
Notes
1. Please consult the most recently issued data sheet before initiating or completing a design.
2. The product status of the device(s) described in this data sheet may have changed since this data sheet was
DEFINITIONS
DISCLAIMERS
Short-form specification
The data in a short-form
Life support applications
These products are not
specification is extracted from a full data sheet with the
same type number and title. For detailed information see
the relevant data sheet or data handbook.
designed for use in life support appliances, devices, or
systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips
Semiconductors customers using or selling these products
for use in such applications do so at their own risk and
agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Limiting values definition Limiting values given are in
accordance with the Absolute Maximum Rating System
(IEC 60134). Stress above one or more of the limiting
values may cause permanent damage to the device.
These are stress ratings only and operation of the device
at these or at any other conditions above those given in the
Characteristics sections of the specification is not implied.
Exposure to limiting values for extended periods may
affect device reliability.
Right to make changes
Philips Semiconductors
reserves the right to make changes, without notice, in the
products, including circuits, standard cells, and/or
software, described or contained herein in order to
improve design and/or performance. Philips
Semiconductors assumes no responsibility or liability for
the use of any of these products, conveys no licence or title
under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that
these products are free from patent, copyright, or mask
work right infringement, unless otherwise specified.
Application information
Applications that are
described herein for any of these products are for
illustrative purposes only. Philips Semiconductors make
no representation or warranty that such applications will be
suitable for the specified use without further testing or
modification.
CAUTION
This product is supplied in anti-static packing to prevent damage caused by electrostatic discharge during transport
and handling. For further information, refer to Philips specs.: SNW-EQ-608, SNW-FQ-302A, and SNW-FQ-302B.
2002 Jun 27
6
Philips Semiconductors
Product specification
870 MHz, 21.5 dB gain push-pull amplifier
CGY887
NOTES
2002 Jun 27
7
Philips Semiconductors – a worldwide company
Contact information
Fax: +31 40 27 24825
© Koninklijke Philips Electronics N.V. 2002
SCA74
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual property rights.
Printed in The Netherlands
613518/02/pp8
Date of release: 2002 Jun 27
Document order number: 9397 750 09935
|