1.Connect Antenna and Display Cables
Note: Some TV sets may already have the cables connected.
Use a RJ12 Data cable to
Use a HDMI connector cable to
connect the Set-Top box to the
connect the Set-Top Box to the
TV. Attach one end of the RJ12
TV. Attach one end of the
Data cable to the jack labeled
HDMI cable to the jack labeled
DISPLAY on the Set-Top box
and the other end to the jack
labeled DATA1 on the TV.
HDMI Out on the Set-Top
Box and the other end to the
HDMI jack on the TV. If the TV
has 2 HDMI jacks, ensure that
the cable is connected to the
jack labeled HDMI 1 on the
TV.
3.
After connecting all the cables,
proceed to the next section and
connect the Power cables.
Connect the antenna cable to
the antenna input of the
Set-Top Box.
NETWORK
DIGITAL AUDIO
RF IN
CONTROL
AUDIO OUT
POWER
HDMI OUT
DY
PPV
2.
Connect Power Cables
Note: Some TV sets may already have the cables connected.
Connect the power cable
from the Mains Power
Splitter to the AC-Inlet
on the TV.
Connect the power cable
from the External Power
Adaptor to the jack
labeled Power on the
Set-Top Box.
Attach the Mains Power
Splitter to the External
Power Adaptor.
Connect the main power
cord (packed with your
TV) into the opening on
the Mains Power Splitter.
After connecting all
cables and devices, plug in
the main power cord to
the wall outlet and switch
on the TV.
(
'
NETWORK
DIGITAL AUDIO
POWER
RF IN
CONTROL
AUDIO OUT
HDMI OUT
DISPLAY
PPV
26” 32” 37”
42” LCD
CAUTION : This is a
Class 1 apparatus. It
must be connected to a
MAINS socket out with
a protective earthing
connection.
5
4
|