Philips Work Light Standard Finish Flange Options User Manual

Calculite  
Standard Finish & Flange Options  
Standard Finish Options  
Note: Not all finishes available for all trims.  
CCL Comfort Clear™  
CCD Comfort ClearDiffuse  
WH White  
CL Clear  
The matte white finish produces  
the brightest aperture when illumi-  
nated but provides the smoothest  
transition to most ceilings when  
off. White is available only with a  
white flange.  
Clear is the most specular and  
therefore most efficient finish  
available. Clear reflectors deliver  
maximum photometric performance  
but can produce a mirror image of  
the interior of the space.  
Comfort Clear is a slightly diffuse  
clear finish, which eliminates irides-  
cence and reduces the mirror image  
inherent with specular finishes.  
Comfort Clear Diffuse is a semi-  
specular finish that softens the  
light at the source of the reflector.  
The finish creates a subtle, even  
luminance from the reflector cone.  
BK Black  
CCZ Champagne Bronze  
GD Gold  
MG  
Black is a specular finish that pro-  
vides the lowest aperture brightness  
possible and significantly reduces  
source identification in a ceiling.  
Champagne Bronze is a semi-  
specular finish that softens the  
light at the source of the reflector  
while providing a warmer reflector  
appearance. Light output is slightly  
warmer as well.  
Gold is a specular finish that  
Multigroove trims provide a seam-  
less matte black aluminum baffling  
that captures stray light for a very  
low brightness aperture.  
provides a pale tint of color for  
slightly warming the light output.  
Reflector appearance mixes well in  
spaces with gold and brass finishes.  
Flange Options  
P Polished Flange  
W White Painted Flange  
5/8" wide integral flange polished and finished to match  
the appearance of the interior of the reflector (available  
option on most reflector types).  
5/8" wide integral flange painted matte white. Standard  
trim detail on all reflectors.  
Care & Maintenance  
If handling of reflectors with Alzak® finish is required, the use of clean white or plastic film gloves is recommended  
to avoid fingerprints. Alzak® surfaces can be cleaned by the following methods: Wipe off with soft clean, dry  
lint-free cloth; or wipe off with a soft cloth dampened in mild detergent solution, rinse, then wipe dry with lint-free  
cloth or paper towel. Avoid gritty cleaning agents.  
Note: Not all finishes are available for all trims. Refer to specification sheet for availability.  
© 2008 Philips Group  
Lightolier is a Philips group brand  
 

Philips Car Video System CED228 User Manual
Philips Clock Radio XP AJ 3380 User Manual
Philips MP3 Docking Station AJ301DB 79 User Manual
Philips Portable Speaker SBA160 10 User Manual
Philips Switch 3121 235 20301 User Manual
Pioneer Car Speaker S 31 LR K User Manual
Pioneer DVD Player DVL V888 User Manual
Porter Cable Cordless Saw 643 User Manual
Proctor Silex Microwave Oven 87027 User Manual
ProForm Treadmill PFTL989081 User Manual