MICROPHONE MUTE
CALL TRANSFER
1. During a call, press the Trans soft
key (the active call is placed on hold).
BASIC PHONE FEATURES
During a call, press
. Mute applies to
PLACING A CALL
Using the Handset:
Pick up the handset and enter the
number or enter the number first, and
then pick up the handset.
all modes: handset, headset, and
hands-free. You can hear all other
parties while Mute is enabled.
Press the Blind soft key to transfer the
call without speaking to the second
party.
To turn off Mute, press
again.
Using the hands-free Speakerphone:
CALL HOLD AND RESUME
1. During a call, press
2. Press again, the Resume soft
2. Place a call to the party to which you
want to transfer the call.
3. After speaking with the second party,
press the Trans soft key to complete
the transfer.
1. With the handset on-hook, press
or any assigned line key.
,
.
2. Dial the number.
Or dial the number, and then press
key, or the line key to resume the call.
.
Using the optional Headset:
1. With the headset connected, press:
Transfer may be cancelled during
establishment by pressing the Cancel
soft key. The original call is resumed.
When a call has been on hold for an
extended period of time, both visual
and audible alerts may appear.
-
-
any assigned line key, or
the NewCall soft key.
LOCAL CONFERENCE CALLS*
To create a three-way local
conference call:
2. Press
3. Dial the number.
.
CALL FORWARDING
To enable call forwarding:
Or dial the number, and then press
.
1. Call the first party.
1. Press
and select Features,
2. Press the Conf soft key to create a
new call (the active call is placed on
hold).
3. Place a call to the second party.
4. When the second party answers,
press the Conf soft key again to join all
parties in the conference.
and then Forward.
During a call, you can alternate
between handset, headset, or hands-
2. Select a Forwarding Type from
Always, No Answer, and Busy.
3. For all types, enter a number to
forward all future calls to.
4. For No Answer, enter the number of
rings before forwarding.
5. Press the Enable soft key to confirm
Call Forwarding. A moving arrow icon
appears for that line to confirm Call
Forwarding is enabled.
SoundPoint® IP 32x/33x
free modes by pressing the
keys, or picking up the handset.
or
Quick User Guide
ANSWERING A CALL
Using the Handset:
Pick up the handset.
Using the Speakerphone:
Press:
When a conference has been
established, pressing the Split soft
key will split the conference into two
calls on hold.
Basic Phone Features
Customizing Your Phone
-
-
-
, or
the line key, or
the Answer soft key.
To disable call forwarding:
Applies to phones running SIP 3.1.3 or
later.
Placing the call on hold on the
conference originator’s phone will
place the other parties in the
conference on hold.
1. Press
and select Features,
Using the optional Headset:
and then Forward.
Press
.
For detailed information please consult
the comprehensive SoundPoint IP
32x/33x User Guide available at:
2. Select a Forwarding Type from
Always, No Answer, and Busy.
3. Press the Disable soft key.
Incoming calls may be ignored by
pressing the Reject soft key during
ringing.
A conference may be created at any
time between an active call and a call
which is on hold (on the same line or
another line) by pressing the Join soft
key.
Call forwarding is not available on
shared lines.
ENDING A CALL
Using the Handset:
Hang up or press the EndCall soft key.
Using the Speakerphone:
If call forwarding is configured on the
call server (invoked using * code dialing
or from a PC-based application), then
particulars and menu options may vary.
Ending the call on the conference
originator’s phone will allow the other
parties to continue the conference.
©2009 Polycom, Inc. All rights reserved.
Press
or the EndCall soft key.
___ _
Polycom, the Polycom logo and SoundPoint are registered
trademarks of Polycom, Inc. in the U.S. and various countries.
All other trademarks are the property of their respective owners.
Information in this document is subject to change without notice.
Using the optional Headset:
* - Conferencing is an optional feature that must be
configured on the call server. Particulars and menu
options may vary.
Press or the EndCall soft key.
SoundPoint IP 32x/33x Quick User Guide. 1725-11240-001 Rev C. 6/2009
1
|