UF-PRO 210 & 310
User’s Manual
Supports: 210 100lbs/45kg, 310 200lbs/91kg
Included Mounting Hardware
You Will Need
210
1
2
3
4
5
6
7
8
9
Mount
(x1)
(x4)
(x4)
(x4)
(x4)
(x4)
(x4)
(x4)
(x4)
(x4)
A Stud finder
(x1)
(x1)
(x1)
(x1)
M4, M5 & M6 x 10 bolts
M4, M5 & M6 x 15 bolts
M4, M5 & M6 x 25 bolts
5/16” x 3” lag bolts
Concrete anchors
Round washers
B Bubble level
C Marker
D Drill
E 3/16” or 3/8” drill bit (x1)
F Hex wrench
G Hammer
(x1)
(x1)
Rectangular washers
Type 1 spacers
10 Type 2 spacers
310
vBar (x2)
Wall plate (x1)
Lock (x2)
UF-PRO 210 & 310
Installation
1.1 On drywall (only), witha stud-
finder, logate and mark the cen-
ter of the studs.
1
1.2 On all walls, use the wall plate
to mark the location of the fixing
holes.
1.3 On drywall walls drill 3/16”
(x4) holes. On concrete walls
drill 3/8” (x4) holes.
1.4 En paredes de concreto (úni-
camente) inserte las anclas de
concreto con ayuda de un mar-
tillo.
1.5 Fix wall plate with lag bolts
and washers.
Result of steps 1.1 to 1.5
UF-PRO 210 & 310
Installation (2)
2
3
4
2 Using M5, M6 o M8 (x4) bolts and
the square washers (x4) fix the vBars
(2x) to the back of the TV.
3 Hang the TV using the hooks of
the vBars on the lip of the wall
plate. Make sure it is hanging
from the upper and lower lips of
the wall plate.
Note: There are two sets of hooks
on each vBar for two different
height TV positions.
4 Slide in the lock bars (2x) in
to the vBar, just below the wall
plate. To remove the TV you must
remove the locks first.
|