Volume
The volume-knob controls how much power the amplifier will give
through the ”Speaker Output”. The normal level is about half.
Instruction manual
Amplifier
PA-150
Crossover
This knob controls the crossover. It works only when the amplifier is in
”Low Pass”-mode. The normal level is about half or less.
Cleaning
When you clean the amplifier, use a moist cloth. Be sure that the
power is turned Off.
Low Pass - Full
Choose between using the amplifier as a full range amplifier or a
sub amplifier.
Fuse
If you play to loud to long, or you connect something wrong the
fuse might brake. One extra fuse is enclosed and is easy to change.
You can find the fuse beneath ”Fuse” on the backside.
JWS International AB - Oktanvägen 2 - 311 33 Falkenberg
Tel. 0346 / 149 95 - Fax. 0346 / 153 70
|