Sharp MP3 Player Accessories DK CL5P User Manual

Thank you for purchasing this SHARP product.  
To obtain the best performance from this product, please read this  
manual carefully. It will guide you in operating your SHARP product.  
ne  
ho  
iP  
&
od  
DK-CL5PiP  
R
O
G
IN  
F
M
E
T
TUN  
S
Y
S
IC  
S
U
M
MORY  
®
CLOCK  
/
ME  
CK  
A
TR  
T
E
S
E
R
P
MUSIC SYSTEM FOR iPod  
& iPhone  
E
ER  
M
IM  
D
VOLUM  
M
R
A
AL  
®
CTION  
N
FU  
Y
PLA  
DIS  
T
E
S
-BY  
E
D
R
AN  
M
R
ALA  
/
ST  
ON  
MODEL  
DK-CL5P  
Accessories  
Please confirm that only the following accessories are included.  
(Remote control x 1)  
(Coin Battery x 1)  
OPERATION MANUAL  
Remote control unit (x 1)  
92L34900034101  
AC/DC adaptor x 1  
92L88900034101  
iPhone adaptor 12  
iPhone adaptor 15  
iPhone adaptor 19  
iPhone, iPod, iPod classic,  
iPod nano, and iPod touch are  
trademarks of Apple Inc.,  
registered in the U.S. and  
92L43200033101  
92L43200033201  
92L43200033301  
 
other countries.  
DK-CL5P  
IMPORTANT SAFETY INSTRUCTIONS  
Electricity is used to perform many useful functions, but it can  
also cause personal injuries and property damage if improperly  
handled. This product has been engineered and manufactured  
with the highest priority on safety. However, improper use can  
result in electric shock and/or fire. In order to prevent potential  
danger, please observe the following instructions when  
installing, operating and cleaning the product. To ensure your  
safety and prolong the service life of this product, please read  
the following precautions carefully before use.  
12) Use only with the cart, stand, tripod, bracket,  
or table specified by the manufacturer, or sold  
with the apparatus. When a cart is used, use  
caution when moving the cart/apparatus  
combination to avoid injury from tip-over.  
13) Unplug this apparatus during lightning storms or when  
unused for long periods of time.  
14) Refer all servicing to qualified service personnel. Servicing  
is required when the apparatus has been damaged in any  
way, such as power-supply cord or plug is damaged, liquid  
has been spilled or objects have fallen into the apparatus,  
the apparatus has been exposed to rain or moisture, does  
not operate normally, or has been dropped.  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
Additional Safety Information  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
15) Power Sources - This product should be operated only from  
the type of power source indicated on the marking label. If  
you are not sure of the type of power supply to your home,  
consult your product dealer or local power company. For  
product intended to operate from battery power, or other  
sources, refer to the operating instructions.  
7) Do not block any ventilation openings. Install in accordance  
with the manufacturer's instructions.  
8) Do not install near any heat sources such as radiators, heat  
registers, stoves, or other apparatus (including amplifiers)  
that produce heat.  
16) Overloading - Do not overload wall outlets, extension cords,  
or integral convenience receptacles as this can result in a  
risk of fire or electric shock.  
9) Do not defeat the safety purpose of the polarized or  
grounding-type plug. A polarized plug has two blades with  
one wider than the other. A grounding type plug has two  
blades and a third grounding prong. The wide blade or the  
third prong are provided for your safety. If the provided plug  
does not fit into your outlet, consult an electrician for  
replacement of the obsolete outlet.  
17) Object and Liquid Entry - Never push objects of any kind into  
this product through openings as they may touch dangerous  
voltage points or short-out parts that could result in a fire or  
electric shock. Never spill liquid of any kind on the product.  
10) Protect the power cord from being walked on or pinched  
particularly at plugs, convenience receptacles, and the point  
where they exit from the apparatus.  
11) Only use attachments/accessories specified by the  
manufacturer.  
 
3
DK-CL5P  
IMPORTANT SAFETY INSTRUCTIONS (continued)  
18) Damage Requiring Service - Unplug this product from the  
wall outlet and refer servicing to qualified service personnel  
under the following conditions:  
22) Power Lines - An outside antenna system should not be  
located in the vicinity of overhead power lines or other  
electric light or power circuits, or where it can fall into such  
power lines or circuits. When installing an outside antenna  
system, extreme care should be taken to keep from touching  
such power lines or circuits as contact with them might be  
fatal.  
a) When the AC cord or plug is damaged,  
b) If liquid has been spilled, or objects have fallen into the  
product,  
c) If the product has been exposed to rain or water,  
d) If the product does not operate normally by following  
the operating instructions. Adjust only those controls  
that are covered by the operating instructions as an  
improper adjustment of other controls may result in  
damage and will often require extensive work by a  
qualified technician to restore the product to its normal  
operation,  
23) Protective Attachment Plug - The product is equipped with  
an attachment plug having overload protection. This is a  
safety feature. See Instruction Manual for replacement or  
resetting of protective device. If replacement of the plug is  
required, be sure the service technician has used  
a
replacement plug specified by the manufacturer that has the  
same overload protection as the original plug.  
e) If the product has been dropped or damaged in any  
way, and  
24) Stand - Do not place the product on an unstable cart, stand,  
tripod or table. Placing the product on an unstable base can  
cause the product to fall, resulting in serious personal  
injuries as well as damage to the product. Use only a cart,  
stand, tripod, bracket or table recommended by the  
manufacturer or sold with the product. When mounting the  
product on a wall, be sure to follow the manufacturer's  
f ) When the product exhibits  
a
distinct change in  
performance - this indicates a need for service.  
19) Replacement Parts - When replacement parts are required,  
be sure the service technician has used replacement parts  
specified by the manufacturer or have the same  
characteristics as the original part. Unauthorized  
substitutions may result in fire, electric shock, or other  
hazards.  
instructions.  
Use  
only  
the  
mounting  
hardware  
recommended by the manufacturer.  
20) Safety Check - Upon completion of any service or repairs to  
this product, ask the service technician to perform safety  
checks to determine that the product is in proper operating  
condition.  
21) Wall or ceiling mounting - When mounting the product on a  
wall or ceiling, be sure to install the product according to the  
method recommended by the manufacturer.  
 
4
DK-CL5P  
SPECIAL NOTES  
Contents  
Page  
ENERGY STAR ® Program Information  
General Information  
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Controls and indicators . . . . . . . . . . . . . . . . . . 7 - 9  
Products that have earned the  
®
Preparation for Use  
ENERGY STAR are designed  
to protect the environment  
through superior energy  
efficiency.  
System connections . . . . . . . . . . . . . . . . . . 10 - 11  
Remote control . . . . . . . . . . . . . . . . . . . . . . . 12 - 13  
Basic Operation  
General control . . . . . . . . . . . . . . . . . . . . . . . 13 - 14  
Setting the time and date . . . . . . . . . . . . . . . . . . . 15  
ENERGY STAR® is a U.S. registered mark.  
iPod and iPhone  
Listening to the iPod or iPhone . . . . . . . . . 16 - 18  
USB Memory Playback  
Listening to USB mass storage device/  
SD Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 - 20  
Radio  
Listening to the radio . . . . . . . . . . . . . . . . . . 20 - 22  
Advanced Features  
Alarm and sleep operation . . . . . . . . . . . . . 22 - 25  
Enhancing your system . . . . . . . . . . . . . . . . 25 - 26  
References  
Troubleshooting chart . . . . . . . . . . . . . . . . . 26 - 28  
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . 29 - 30  
CONSUMER LIMITED WARRANTY . . . .Back cover  
 
5
DK-CL5P  
Precautions  
General  
Hold the AC/DC adaptor by the  
head when removing it from the  
AC outlet, as pulling the cord  
can damage internal wires.  
Please ensure that the equipment is  
positioned in a well-ventilated area  
and ensure that there is at least  
4" (10 cm) of free space along the  
sides, top and back of the equipment.  
4" (10 cm)  
The AC/DC adaptor is used as  
a disconnect device and shall  
always remain readily  
operable.  
4" (10 cm)  
Use the unit on a firm, level surface  
Do not remove the  
outer cover, as this  
may result in electric  
shock. Refer internal  
service to your local  
SHARP service  
free from vibration.  
D
YS  
TE  
K
-
C
M
L
F
5
O
P
R
i
P
o
d
&
i
P
h
o
n
e
M
U
S
I
C
S
T
U
N
I
N
G
V
O
L
U
M
E
/
C
L
O
C
K
M
E
M
D
I
T
R
A
A
L
A
R
M
P
R
F
U
N
C
T
I
O
N
Y
O
N
/
S
TA  
N
D
-
B
E
S
A
L
A
R
M
R
FM ANTENNA  
VIDEO OUT  
AUDIO IN  
DC IN 8V  
facility.  
Keep the unit away from direct  
sunlight, strong magnetic  
fields, excessivedust, humidity  
and electronic/electrical  
equipment (home computers,  
facsimiles, etc.) which  
generate electrical noise.  
This unit should only be used within the range of 41°F - 95°F  
(5°C - 35°C).  
To prevent fire or shock hazard, do not expose this appliance  
to dripping or splashing. No object filled with liquids, such as  
vases shall be placed on the apparatus.  
D
K-CL  
5P  
R
e
M
U
S
I
C
S
Y
S
T
E
M
F
O
i
P
o
d
&
i
P
h
o
n
T
U
NI  
NG  
V
O
L
U
M
E
M
E
M
O
R
Y
/
C
LO  
C
K
D
M
M
A
L
ARM  
F
U
N
C
T
I
O
N
P
R
E
S
E
T
T
R
A
C
K
O
N
/
S
TA  
N
D
-
B
Y
A
L
A
R
M
R
E
S
Warning:  
Do not place anything on top of the unit.  
Do not expose the unit to moisture, to temperatures higher  
The voltage used must be the same as that specified on this  
unit. Using this product with a higher voltage other than that  
which is specified is dangerous and may result in a fire or other  
type of accident causing damage. SHARP will not be held  
responsible for any damage resulting from use of this unit with a  
voltage other than that which is specified.  
than 140°F (60°C) or to extremely low temperatures.  
If your system does not work properly, disconnect the AC/DC  
adaptor from the AC outlet. Plug the AC/DC adaptor back in,  
and then turn on your system.  
In case of an electrical storm,  
unplug the unit for safety.  
Volume control  
The sound level at a given volume setting depends on speaker  
efficiency, location and various other factors. It is advisable to  
avoid exposure to high volume levels, which occurs while  
turning the unit on with the volume control setting up high, or  
 
while continually listening at high volumes.  
6
DK-CL5P  
Controls and indicators  
Top panel  
Reference page  
1
2
3
PRESET TRACK  
5
1. USB Slot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
2. iPod and iPhone Dock . . . . . . . . . . . . . . . . . . . . . . . 17  
3. Memory Card Slot . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
4. Volume Down / Up Knob . . . . . . . . . . . . . . . . . . . . . 14  
5. ON/STAND-BY / FUNCTION  
Alarm Reset Button . . . . . . . . . . . . . . . . . . . 13, 19, 23  
6. Alarm 1/Display Button . . . . . . . . . . . . . . . . . . . . 22, 23  
7. Alarm 2/Display Button . . . . . . . . . . . . . . . . . . . 22, 23  
8. SNOOZE / DIMMER Button . . . . . . . . . . . . . 13, 23, 28  
9. Preset / Track Down Button . . . . . . . . . . . . . . . . 15, 18  
10. Preset / Track Up Button . . . . . . . . . . . . . . . . . . 15, 18  
11. Memory / Clock / Play / Pause Button . . . . . 15, 18, 19  
12. Tuning Down / Up Knob . . . . . . . . . . . . . . . . . . . . . 20  
DK-CL5P  
MUSIC SYSTEM FOR iPod  
&
iPhone  
VOLUME  
TUNING  
FUNCTION  
CLOCK  
/
MEMORY  
ALARM  
DIMMER  
ON STAND-BY  
/
ALARM RESET  
DISPLAY  
8
4
5 6  
7
9
10 11  
7 6  
12  
Display  
2
3
4
8
Reference page  
1. Alarm (1 and 2) indicator. . . . . . . . . . . . . . . . . . . . . . 22  
2. iPod indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
3. USB indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
4. SD Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
5. Sleep Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
6. Nap Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
7. FM Tuner Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
8. Day Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
iPod USB SD  
SLEEP  
1
2
iPod  
iPod  
AM  
FM  
PM  
1
2
MHz  
Radio  
Radio  
1
2
Buzzer  
Buzzer  
MON TUE WED THU FRI SAT SUN  
1
 
7
DK-CL5P  
Controls and indicators (continued)  
The iPod rating label (*)  
1A  
The spec label (*)  
The spec label illustration may be different  
from the actual label used.  
(*) Label is located at the bottom of the unit.  
1
Bottom view  
Reference page  
1. Battery Compartment . . . . . . . . . . . . . . . . . . . . . . . 11  
Rear panel  
Reference page  
1. FM Antenna Wire (fixed). . . . . . . . . . . . . . . . . . . . . . 25  
2. Video Out Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
3. Audio In Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
4. DC Input Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
VIDEO OUT  
AUDIO IN  
DC IN 8V  
FM ANTENNA  
1
2
3
4
 
8
DK-CL5P  
Remote control  
9
Reference page  
1
2
1. Remote Control  
Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
2. ON/STAND-BY/Alarm  
Reset Button . . . . . . . . . . . . . . . . . . . . . . 13, 15, 19, 20  
3. Menu Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
4. Tuning Up/Down/Fast Forward/Next/  
10  
11  
12  
3
13  
Fast Reverse/Prev Button . . . . . . . . . . . 15, 18, 19, 20  
5. Preset/Folder Up and Down Buttons . . . . . . . . 18, 22  
6. Equalizer Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
7. NAP Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
8. Alarm 1 and Alarm 2 Button . . . . . . . . . . . . . . . 22, 23  
9. Function Button . . . . . . . . . . . . . . . . . . . 10, 17, 21, 26  
10. Display (TV Out) Button . . . . . . . . . . . . . . . . . . . 10, 18  
11. Clock/Memory/Play/Pause Button . . . . . . . . 15, 18, 19  
12. Enter Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 18  
13. Shuffle Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
14. Repeat Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
15. Volume Up and Down Buttons . . . . . . . . . . . . . . . . 13  
16. Mute Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
17. Sleep Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
4
14  
15  
5
6
7
16  
17  
8
 
9
DK-CL5P  
System connections  
AC/DC adaptor connection  
Make sure to unplug the AC/DC adaptor before making any connections.  
1
2
Plug the AC/DC adaptor cable into the DC IN jack on  
the unit.  
Connecting iPod or iPhone to TV  
Video files from iPod or iPhone can be viewed by connecting the system to  
TV/monitor.  
Plug the AC/DC adaptor into an AC outlet.  
If the TV/monitor has a video input, connect it to the VIDEO OUT jack at the  
back of the unit and set the TV Out on the iPod unit to “ON” position.  
1
Video cable  
(not supplied)  
TV  
AC/DC Adaptor Cable  
VIDEO OUT  
O
OUT  
AUDIO IN  
DC IN 8V  
NA  
VIDEO OUT  
AUDIO IN  
DC IN 8V  
DC IN Jack  
(DC 8V)  
2
To video input jack  
Watching videos on a TV connected to iPod  
1
2
Press the FUNCTION button on the main unit or remote  
control to select the iPod function.  
FM ANTENNA  
VIDEO OUT  
AUDIO IN  
DC IN 8V  
Enter the iPod or iPhone menu.  
Press and hold DISP(TV OUT) button on the remote control or  
ALARM 1 (DISPLAY) button on the main unit until ON appear  
on the display.  
AC Outlet  
(AC 100 - 240 V, 50/60 Hz)  
3
4
Select the desired video to be played.  
Notes:  
Press the ENTER button on the remote control to start playback.  
Unplug the AC/DC adaptor from the AC outlet if the unit will  
not be used for a prolonged period of time.  
Use only the supplied AC/DC adaptor. Using other AC/DC  
adaptor may cause an electric shock or fire.  
Connecting the AC/DC adaptor to the unit disconnects the  
batteries.  
During unit operational with batteries, iPod or iPhone  
attached can be used for playback only.  
Notes:  
To return to watch video on iPod or iPhone screen, return to the menu. Press  
and hold the DISP(TV OUT) on remote control or ALARM 1 (DISPLAY) on  
the main unit until “OFF” appear on the display.  
During iPod or iPhone video playback, press and hold the DISP(TV OUT) on  
the remote control or ALARM 1 (DISPLAY) on the main unit until “OFF”  
appear will not toggle video out display between iPod or iPhone and TV.  
Please make sure to set iPod unit to either NTSC or PAL to match your TV  
signal. Please visit Apple’s home page for further information.  
Customer should also refer iPod and iPhone operation manual before  
making video out setting.  
CAUTION:  
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF  
PLUG TO WIDE SLOT, FULLY INSERT.  
 
10  
DK-CL5P  
Notes:  
Install/Replace batteries  
The battery system is use to provide continuous alarm  
operation and clock setting in event of a power failure. Please  
make sure the AC/DC adaptor is connected, otherwise all  
setting may be lost during battery replacement.  
Remove the batteries if the unit will not be used for a long  
period of time to prevent battery leakage which may cause  
potential damage.  
Use 6 “C” size batteries (UM-2/R14 or similar).  
Batteries are not included.  
For Backup battery:  
Use 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar).  
Batteries are not included.  
Connecting the AC/DC adaptor to the unit disconnects the  
batteries.  
The first time the batteries is install, the clock will blinking on  
the display. Please set the time and date (refer page 15).  
1
2
Open the battery cover.  
Insert the batteries according to the direction  
indicated in the battery compartment.  
When inserting or removing the batteries, push them  
Note:  
towards the  
battery terminal.  
Battery life may vary depending on the temperature, battery  
types and usage conditions.  
3 Close the cover.  
Precautions for battery use:  
Installing the batteries incorrectly may cause the unit to  
malfunction.  
H
O P E N  
Insert the batteries according to the direction indicated in the  
battery compartment.  
S
P U  
H
O P E N  
S
P U  
Replace all old batteries with new ones at the same time.  
Do not mix old and new batteries.  
Batteries (battery pack or batteries installed) shall not be  
exposed to excessive heat such as sunshine, fire or the like.  
Caution:  
Do not use rechargeable batteries (nickeI-cadmium battery, etc.).  
 
11  
DK-CL5P  
Remote control  
Precautions for battery use:  
Battery installation  
Remove the battery if the unit will not be used for long periods  
of time. This will prevent potential damage due to battery  
leakage.  
This product contains a CR Coin Lithium Battery which contains  
Perchlorate Material – special handling may apply. California  
Note:  
Caution:  
Before using remote control, please remove plastic shield at  
Do not use rechargeable battery (nickel-cadmium battery,  
etc.).  
battery holder.  
1
Whilst pushing the locking tab towards the center of the  
remote control, slide out the battery holder.  
Danger of explosion if battery is incorrectly replaced.  
Replace only with the same or equivalent type.  
Batteries (battery pack or battery installed) shall not be  
exposed to excessive heat such as sunshine, fire or the like.  
Installing the battery incorrectly may cause the unit to  
malfunction.  
Back of remote  
Plastic  
control  
shield  
Remote  
control  
Notes concerning use:  
Replace the battery if the operating distance is reduced or if  
the operation becomes erratic. Purchase “CR 2025” 3 V, coin  
lithium battery.  
Locking tab  
Battery holder  
Periodically clean the transmitter on the remote control and  
the sensor on the unit with a soft cloth.  
2
Remove the old battery from the battery holder, insert the  
new battery and then slide the battery holder back into the  
remote control.  
Exposing the sensor on the unit to strong light may interfere  
with operation. Change the lighting or the direction of the unit  
if this occurs.  
Keep the remote control away from moisture, heat, shock,  
and vibrations.  
Battery holder  
Positive (+)  
side up  
Polarity(+)  
symbol  
Battery type  
Locking tab  
 
12  
DK-CL5P  
General control  
DK-CL5P  
MUSIC SYSTEM FOR iPod  
Test of the remote control  
&
iPhone  
Check the remote control after checking all the connections  
(see pages 10 - 11).  
VOLUME  
TUNING  
Point the remote control directly at the remote sensor on the  
unit.  
The remote control can be used within the range shown  
below:  
FUNCTION  
PRESET TRACK  
CLOCK  
/
MEMORY  
ALARM  
DIMMER  
ON / STAND-BY  
Remote sensor  
ALARM RESET  
DISPLAY  
DIMMER  
VOLUME  
FUNCTION  
ON / STAND-BY  
ALARM RESET  
8" - 20'  
(0.2m - 6m)  
15°  
15°  
To turn the power on  
Press the ON/STAND-BY button to turn the power on.  
The first time power is supplied to the unit, the clock will be  
blinking on the display. Please set the time and date  
(refer page 15).  
After use:  
Press and hold the ON/STAND-BY button to enter the power  
stand-by mode.  
 
13  
DK-CL5P  
General control (continued)  
Display brightness control (DIMMER)  
Equalizer  
Press the SNOOZE/DIMMER button to adjust the brightness of  
LCD display.  
Press the EQUALIZER button repeatedly until the desired  
sound mode appears.  
Equalizer off.  
E-FL  
Dimmer 1  
Dimmer 2  
(Display is dim)  
For rock music.  
For classical music.  
For pop music.  
For jazz music.  
E-ro  
(Display gets dimmer)  
E-CL  
E-Po  
E-JA  
Dimmer off (Display is bright)  
Note:  
Setting dimmer to display in the brightest mode during battery  
operation will affect battery life.  
During battery operations in standby mode, the brightness of  
display will automatically go to the lowest mode (dim OFF)  
after 5 seconds.  
Volume auto set in  
If you turn off and on the main unit with the volume set to 17 or  
higher, the volume starts at 16.  
Volume control  
Main unit operation:  
Rotate the Volume knob anti-clockwise to  
decrease volume and clockwise to  
increase volume.  
Remote control operation:  
Press the VOLUME (+ or –) button to  
increase or decrease the volume.  
Volume indicator will be blinking when the  
volume reaches maximum or minimum  
level.  
Muting  
The volume will muted temporarily when pressing the MUTE button  
on the remote control. L-00 will be blinking on the display. Press  
the MUTE button again to restore the volume.  
 
14  
DK-CL5P  
Setting the time and date  
2 Press the  
or  
button to adjust the hour and then  
MUSIC SYSTEM FOR iPod  
&
iPhone  
press the CLOCK/MEMORY button.  
VOLUME  
TUNING  
PM  
FUNCTION  
CLOCK  
/
MEMORY  
PRESET TRACK  
ALARM  
DIMMER  
ON / STAND-BY  
Press the ( or ) button once to advance the time by 1  
hour. Hold it down to advance continuously.  
“AM” or “PM” indicator will interchange after each 12 hour  
cyclic.  
ALARM RESET  
DISPLAY  
3
4
Press the  
or  
button to adjust the minutes and  
then press the CLOCK/MEMORY button.  
PM  
Press the ( or  
1 minute. Hold it down for about 5 seconds to change the  
time in 5-minutes interval.  
) button once to advance the time by  
Press the  
press the CLOCK/MEMORY button.  
or  
button to adjust the day and then  
In this example, the clock is set for the 12-H (12 hour) display.  
1
In standby mode, press the CLOCK/MEMORY button  
for more than 2 seconds. The clock time display format  
PM  
will blinking. Press the (  
or  
) button to select  
12-H or 24-H for clock time display format, then press  
SUN  
CLOCK/MEMORY to confirm.  
“:” will be blinking to indicate time and date setting is  
completed.  
Note:  
During battery operations in standby mode, press the SNOOZE/  
DIMMER button to display the clock for about 5 seconds.  
 
15  
DK-CL5P  
Listening to the iPod or iPhone  
iPod and iPhone operations  
iPod and iPhone adaptor connection  
Made for:  
iPhone 4  
Note:  
You can use an audio cable to connect your iPod or iPhone to  
the AUDIO IN socket if:  
iPhone 3GS  
iPhone 3G  
iPhone  
iPod touch (3 generation)  
iPod touch (2 generation)  
1. Your iPod or iPhone adaptor does not fit into the dock on the  
main unit.  
rd  
nd  
2. You have an iPod or iPhone that does not have an iPod or  
iPhone adaptor.  
st  
iPod touch (1 generation)  
iPod classic  
iPod with video  
iPod nano (5 generation)  
iPod nano (4 generation)  
iPod nano (3 generation)  
iPod nano (2 generation)  
iPod nano (1 generation)  
iPod with colour display  
3. You have an iPod that does not have an iPod 30 pin  
connector.  
th  
th  
iPhone  
Adaptor No.  
rd  
iPhone Description  
Capacity  
nd  
12  
15  
15  
19  
iPhone  
4GB & 8GB & 16GB  
8GB & 16GB  
16GB & 32GB  
16GB & 32GB  
st  
iPhone 3G  
iPhone 3GS  
iPhone 4  
iPod mini  
Caution:  
Please update your iPod unit to the latest software version  
before using it. Please visit Apples homepage to download  
the latest version for your iPod.  
Notes:  
Once the iPod or iPhone is connected to the unit it will begin  
charging.  
If you have an iPod or iPhone that does not have an iPod 30  
Pin connector, you can use an auxillary cable to connect it to  
the AUDIO IN jack.  
The message “This accessory is not made to work with  
iPhone” or similar, may appear on the iPhone screen when:  
-
-
battery is low.  
the iPhone is not properly docked (eg. slanting).  
If this occurs, remove and re-dock the iPhone.  
The iPod or iPhone will not be charged while the main unit  
uses batteries as power supply.  
 
16  
DK-CL5P  
Listening to the iPod or iPhone (continued)  
To insert iPod or iPhone adaptor  
iPod and iPhone  
1. Insert the iPod or iPhone adaptor into unit and connect your  
iPod or iPhone.  
iPod or iPhone playback  
1
2
Press the ON/STAND-BY button to turn the power on.  
iPhone (bottom)  
iPhone  
Press the FUNCTION button on main unit or remote  
control to select the iPod function.  
3
Insert iPod or iPhone unit into the dock of main unit.  
Dock connector  
iPhone  
iPhone adaptor  
CL5P  
DK-  
MUSIC SYSTEM FOR  
e
&
iP  
hon  
Pod  
i
iPhone dock  
E
R
S
E
P
R
ME  
DIM  
ARM  
AL  
N
FUNCTIO  
/
STAND-BY  
ON  
ET  
iPhone connector  
4
Press the ENTER button on the remote control to start  
playback.  
For iPod touch and iPhone, playback will automatically  
start once the desired file is selected.  
Caution:  
Unplug all accessories for the iPod or iPhone before inserting it  
into the dock.  
To disconnect iPod or iPhone  
Simply remove the iPod or iPhone from the dock. It is safe to do  
so even during playback.  
To remove iPod or  
iPhone adaptor  
Insert the tip of a screwdriver (“-”  
type, small) into the adaptor hole as  
shown and lift upward to remove.  
 
17  
DK-CL5P  
Listening to the iPod or iPhone (continued)  
Various iPod or iPhone functions  
Function  
Menu  
Main unit  
Remotecontrol Operation  
Function  
Main unit  
Remotecontrol  
Operation  
Press to view  
the iPod and  
iPhone menu  
____  
Play  
Press in the  
pause mode.  
CLOCK/MEMOR  
K/MEMORY  
CLOCK MEMORY  
MENU  
during iPod  
and iPhone  
function.  
Enter  
Press to  
Pause  
Press in the  
playback  
mode.  
____  
____  
____  
CLOCK/MEMOR  
K/MEMORY  
CLOCK MEMORY  
PRESET TRACK  
confirm the  
ENTER  
selection.  
Cursor  
Repeat  
Press to  
PRESET/FOLDER  
Track  
up/down  
Press in the  
playback or  
select iPod  
TUNING  
and iPhone  
menu.  
pause mode.  
If you press the  
button in the  
pause mode,  
Press to  
select repeat  
mode.  
press the  
/
button to start  
the desired  
track.  
Shuffle  
Press to turn  
on/off shuffle  
mode.  
____  
Fast  
forward/  
reverse  
Press and hold  
down in the  
playback  
TUNING  
PRESET TRACK  
mode.  
iPod and iPhone operation  
The operations described above depend on the generation iPod  
and iPhone you are using.  
Release the  
button to  
resume  
playback.  
TV OUT  
Press for more  
than 2 seconds  
to toggle the  
video out  
(TV OUT)  
DISP  
ALARM  
display  
DISPLAY  
between iPod  
or iPhone and  
TV.  
 
18  
DK-CL5P  
Listening to USB mass storage device/SD Card  
DK-CL5P  
MUSIC SYSTEM FOR iPod  
&
iPhone  
Note:  
This product is not compatible with MTP and AAC file systems  
from USB mass storage device or MP3 player.  
VOLUME  
TUNING  
1
To playback USB/SD Card  
Press the FUNCTION button repeatedly on main unit to select  
USB or SD function. Connect the USB memory device or SD  
card that has MP3 format files on the unit. When the USB  
memory or SD card is connected to the main unit, playback  
will start at first track of first supported folder.  
FUNCTION  
CLOCK  
/
MEMORY  
PRESET TRACK  
ALARM  
DIMMER  
ON / STAND-BY  
ALARM RESET  
2
3
Press the FOLDER  
playback folder.  
Select desired file to be played back by pressing the  
button. Playback will start at desired file.  
(
or  
) button to select desired  
MEMORY CLOCK  
FUNCTION  
ON / STAND-BY  
or  
ALARM RESET  
Press DISPLAY button to display track number and folder  
number.  
FUNCTION  
Note:  
To pause playback:  
Press the  
/
button.  
Auto power off function:  
In the stop mode of USB operation, the main unit enters the  
stand-by mode after 15 minute of inactivity.  
To remove USB memory device  
1
2
Press the FUNCTION button to change to other function.  
Disconnect USB memory device from the USB terminal.  
 
19  
DK-CL5P  
Listening to USB mass storage  
device/SD Card (continued)  
Listening to the radio  
DK-CL5P  
MUSIC SYSTEM FOR iPod  
&
iPhone  
To remove SD card  
1
2
Press the FUNCTION button to change to other function.  
Disconnect SD card from the SD card slot.  
VOLUME  
TUNING  
Notes:  
FUNCTION  
CLOCK  
/
MEMORY  
PRESET TRACK  
ALARM  
DIMMER  
ON / STAND-BY  
SHARP will not be held liable for the loss of data whilst the  
USB memory device is connected to the audio system.  
Files compressed in MP3 format only can be played back  
when connected to the USB or SD card terminal.  
This USB memorys or SD card format supports FAT 16 or  
FAT 32.  
ALARM RESET  
DISPLAY  
TUNING  
FUNCTION  
ON / STAND-BY  
SHARP cannot guarantee that all USB memory devices will  
work on this audio system.  
ALARM RESET  
USB cable is not recommended for use in this audio system  
to connect to USB memory device. Use of the USB cable will  
affect the performance of this audio system.  
This USB memory cannot be operated via USB hub.  
The USB terminal in this unit is not intended for a PC  
connection but is used for music streaming with a USB  
memory device.  
FUNCTION  
External HDD-storage cannot be played back via USB  
terminal.  
If the data inside the USB memory or SD card is large, it may  
take longer time for the data to be read.  
The display will show “no” when not supported device is plug-  
in.  
Tuning  
1
Press the ON/STAND-BY button to turn the power on.  
2
Press the FUNCTION button repeatedly to select the  
Tuner function.  
 
20  
DK-CL5P  
Listening to the radio (continued)  
1
2
Perform steps 1 - 3 in “Tuning” on pages 20 - 21.  
3 Tune to the desired station.  
Press the CLOCK/MEMORY button for more than 2  
seconds on the main unit or remote control to enter  
the preset tuning saving mode.  
Main Unit  
Manual tuning:  
Rotate the TUNING (s or r) knob clockwise or counter  
clockwise to tune into the desired station.  
Remote Control  
Manual tuning:  
Press the TUNING (s or r) button as many times as  
required to tune in to the desired station.  
MON  
3
4
Within 7 seconds, press the  
or  
button on the  
Auto tuning (remote control only):  
main unit or s or r button on the remote control to  
When the TUNING (s or r) button is pressed for more  
than 0.5 seconds, scanning will start automatically and the  
tuner will stop at the first receivable broadcast station.  
select the preset channel number.  
Store the stations in memory, in order, starting with preset  
channel 1.  
Notes:  
When radio interference occurs, auto scan tuning may stop  
automatically at that point.  
Within 7 seconds, press the CLOCK/MEMORY button  
to store that station in memory.  
Auto scan tuning will skip weak signal stations.  
To stop the auto tuning, press the TUNING (s or r) button again.  
Receiving an FM stereo transmission:  
If the FM reception is weak, the reception will auto changes to  
monaural, and the sound becomes clearer.  
MON  
MON  
If the preset number indicators disappear before the  
station is programmed, repeat the operation from step 2.  
Programming a station  
You can store 20 FM stations in memory and recall them at the  
push of a button. (Preset tuning)  
5
Repeat steps 1 - 4 to set other stations, or to change a  
preset station.  
When a new station is stored in memory, the station  
previously programmed for that preset channel number will  
be erased.  
 
21  
DK-CL5P  
Listening to the radio (continued)  
Alarm and sleep operation  
Alarm  
Note:  
The unit turns on and play desired source (iPod, iPhone or  
The batteries system protects the programmed stations should  
TUNER) or Buzzer sound for 1 hour alarm cycle.  
there be  
a
power failure or the AC/DC adaptor becomes  
disconnected. If the backup batteries are drain off, the  
programmed stations will be erased.  
Before setting the alarm:  
1 Check that the clock is set to the correct time. (refer page 15)  
If it is not set, you cannot use the alarm function.  
To recall a programmed station  
Press PRESET/TRACK  
repeatedly or PRESET/FOLDER  
repeadtedly to select the desired programmed station.  
(
or  
)
button on main unit  
2 For iPod or iPhone playback: Insert iPod or iPhone to the  
unit. (refer page 17)  
(s  
or  
r)  
on remote control  
3 For TUNER: Set preset memory. (refer page 21)  
Setting the alarms  
In this example, the setting is for ALARM 1. The same method  
is used to set for ALARM 2.  
1
In standby mode, press and hold the ALARM 1 button  
until the alarm time blinking.  
2
Press the (  
press the ALARM 1 button.  
or  
) button to adjust the hour and  
PM  
Press the (  
or  
) button once to advance the time by 1  
hour. Hold it down to advance continuously. AM” or “PM”  
indicator will interchange after each 12 hour cyclic.  
 
22  
DK-CL5P  
Note:  
If wake up source is set to iPod, and iPod is not present, the  
alarm source will change to default Buzzer.  
3 Press the (  
or  
) button to adjust the minutes and  
then press the ALARM 1 button.  
Activate and deactivate the alarm  
PM  
1
Press ALARM 1 or ALARM 2 button once to deactivate  
current alarm times and wake up source.  
2
3
Press ALARM 1 or ALARM 2 button again to activate  
the alarm function. When the alarm setting time is  
activated, alarm icon ( or ) will appear on display.  
Press the (  
or  
) button once to advance the time by 1  
minute. Hold it down to change the time in 5 minutes  
interval.  
When alarm has started, alarm icon ( or ) will  
blinking on the display.  
4 Press the (  
or  
) button to select the day for alarm  
and then press the ALARM 1 button.  
Daily Alarm:  
Weekday : MON - FRI (alarm activate from Monday to  
Friday only)  
Weekend : SAT - SUN (alarm activate from Saturday to  
Sunday only)  
Everyday : MON - SUN (alarm activate daily)  
During alarm function, press ALARM RESET button to stop  
alarm and it will come again on the next day.  
FUNCTION  
ON / STAND-BY  
ALARM RESET  
5 Press the (  
or  
) button to select the wake up  
source and then press the ALARM 1 button.  
Snooze function  
Once alarm has started, pressing the SNOOZE/DIMMER button  
will stop alarm for 9 minutes.  
PM  
PM  
Once the snooze time has expired, alarm will continue.  
The snooze function can be operated during 1 hour alarm cycle.  
Wake up source:  
iPod BUZZER  
RADIO  
Alarm icon “ ” will light up to indicate alarm setting.  
 
23  
DK-CL5P  
Alarm and sleep operation (continued)  
Sleep operation  
To use alarm and sleep operation together  
The unit can be turned off automatically.  
Sleep and alarm:  
For example, you the can fall asleep listening to the radio and  
wake up to listening to the iPod in the next morning.  
1
2
Playback the desired sound source.  
Press the SLEEP button on the remote control  
repeatedly to select sleep time.  
1
2
Set the sleep time (steps 1 - 3, page 24).  
While the sleep timer is set, set the alarm  
(steps 1 - 4, pages 22 - 23).  
120  
90  
60  
3
Activate the alarm (page 23).  
oFF  
15  
30  
Alarm setting  
Sleep timer setting  
End time  
1 hour  
Alarm start time  
3
After 5 seconds the display  
will return to previous mode  
and sleep indicator appears.  
15 minutes - 2 hours  
Sleep operation will  
automatically stop  
To confirm the remaining sleep time:  
1
While “SLEEP” is indicated, press the SLEEP button once  
to display “XXX”.  
“XXX” is sleep remaining time.  
The remaining sleep time is displayed for about 5 seconds.  
You can change the remaining sleep time while it is displayed  
by pressing the SLEEP button (step 2).  
To cancel the sleep operation:  
Press and hold the ON/STAND-BY button while “SLEEP” is  
indicated.  
To cancel the sleep operation without setting the unit to the  
stand-by mode, proceed as follows.  
1
While “SLEEP” is indicated, press the SLEEP button  
repeteadly to select “OFF”.  
 
24  
DK-CL5P  
Enhancing your system  
The auxiliary cable is not included. Purchase  
auxiliary cable as shown below.  
a
separate  
NAP  
The main unit will temporarily enters stand-by mode when pressing  
NAP button. After nap time, main unit will power on into last function  
used.  
Portable audio player  
1
2
Playback the desired sound source.  
Press the NAP button on the remote control repeatedly to  
select nap time.  
Note:  
Selecting  
function.  
oFFduring NAP setting will activate the last  
Computer  
120  
oFF  
90  
05  
60  
10  
30  
20  
To the line  
output jack  
3
The unit will go to standby mode and NAP indicator (  
appears on the display.  
)
FM ANTENNA  
VIDEO OUT  
AUDIO IN  
DC IN 8V  
To confirm the remaining nap time:  
1
While “ ” is indicated, press the NAP button once to display  
“XXX”.  
“XXX” is NAP remaining time.  
The remaining NAP time is displayed for about 3 seconds.  
You can change the remaining NAP time while it is displayed  
by pressing the NAP button (step 2).  
Auxiliary cable  
(not supplied)  
To cancel the NAP operation:  
Press the ON/STAND-BY button while “ ” is indicated.  
 
25  
DK-CL5P  
Enhancing your system  
Troubleshooting chart  
Many potential problems can be resolved by the owner without  
calling a service technician.  
If something is wrong with this product, check the following  
before calling your authorized SHARP dealer or service center.  
(continued)  
Listening to the audio/video sounds from  
portable audio player, computer etc.  
General  
Symptom  
1
Use the auxiliary cable to connect the portable audio  
player, computer etc. to the AUDIO IN jack.  
Possible cause  
The clock is not set to the Did a power failure occur?  
When using video equipment, connect the audio output to  
this unit and the video output to a television.  
correct time.  
Reset the clock. (Refer to  
page 15)  
2
3
Press the ON/STAND-BY button to turn the power on.  
When a button is  
pressed, the unit does  
not respond.  
Set the unit to the power  
stand-by mode and then turn  
it back on.  
Press the FUNCTION button on main unit or remote  
control to select Audio In function.  
If the unit still malfunctions,  
reset it.  
4
Play the connected equipment.  
(Refer to page 28)  
No sound is heard.  
Is the volume level set to “0”?  
Note:  
To prevent noise interference, place the unit away from the  
television and do not make any auxiliary playback, while  
listening to the iPod or iPhone.  
Remote control  
Symptom  
Possible cause  
The remote control does Is the AC/DC adaptor of the  
not operate.  
unit plugged in?  
Is the battery polarity  
correct?  
Is the battery dead?  
Is the distance or angle  
incorrect?  
Does the remote control  
sensor receive strong light?  
 
26  
DK-CL5P  
USB/SD  
Symptom  
iPod and iPhone  
Symptom  
Possible cause  
Possible cause  
No sound is produced. The iPod or iPhone unit  
Device cannot be  
Is there any MP3 file  
available?  
No image appears on  
the TV/monitor.  
software version is not update  
to the latest version. Please  
visit Apples homepage.  
detected.  
Is the device properly  
connected?  
Is it an MTP device?  
Does the device contain  
AAC file only?  
The iPod or iPhone is not  
playing.  
The iPod or iPhone is not  
properly connected to the unit.  
Playback does not start. Is it a false MP3 file?  
Is the AC/DC adaptor of the  
unit plugged in?  
The video cable is not properly  
Tuner  
Symptom  
The radio makes unusual Is the unit placed near the  
connected.  
The TV/monitors input  
selection is not properly set.  
Possible cause  
iPod or iPhone will not The iPod or iPhone is not  
noises continuously.  
TV or computer?  
Is the FM antenna placed  
properly? Move the antenna  
away from the AC/DC  
adaptor if it is located  
nearby.  
charge.  
making full contact with the  
connector.  
Is the AC/DC adaptor of the  
unit plugged in?  
rd  
Using iPod (3 generation).  
The main unit is using  
batteries as power supply.  
The iPod or iPhone is not  
supported. Refer page 16 for  
compatible models.  
“This accessory is not The iPhone battery is low.  
made to work with  
iPhone” or similar  
appears on iPhone  
screen.  
Please charge the iPhone.  
iPhone not properly docked.  
 
27  
DK-CL5P  
Troubleshooting chart (continued)  
Condensation  
Before transporting the unit  
Sudden temperature changes, storage or operation in an  
extremely humid environment may cause condensation inside  
the cabinet or on the transmitter on the remote control.  
Condensation can cause the unit to malfunction. If this happens,  
leave the power on until normal playback is possible (about 1  
hour). Wipe off any condensation on the transmitter with a soft  
cloth before operating the unit.  
Undock the iPod or iPhone and remove the USB/SD card from  
the unit. Then, set the unit to the power standby mode. Carrying  
the unit with iPod or iPhone left docked or USB/SD card  
unremoved might damage the systems.  
Maintenance  
If problem occurs  
When this product is subject during operation to strong external  
interference (mechanical shock, excessive static electricity,  
abnormal supply voltage due to lightning, etc.) or if it is operated  
incorrectly, it may malfunction.  
Cleaning the unit  
Periodically wipe the unit with a clean soft cloth.  
Caution:  
If such a problem occurs, do the following:  
1
Do not use chemicals for cleaning (gasoline, paint thinner,  
etc.). It may damage the unit finishing.  
Do not apply oil to the inside of the unit. It may cause  
malfunctions.  
Set the unit to the stand-by mode and turn the power on  
again.  
2
If the unit is not restored in the previous operation, unplug  
and plug in the unit, and then turn the power on.  
Note:  
If neither operation above restores the unit, remove the backup  
batteries.  
Clearing all the memory (reset)  
During standby mode, press and hold SNOOZE/DIMMER  
button for 5 seconds. Display will become blank for a while and  
main unit will reset.  
Caution:  
This operation will erase all data stored in memory including  
clock, alarm settings and tuner preset.  
 
28  
DK-CL5P  
Specifications  
As part of our policy of continuous improvement, SHARP  
reserves the right to make design and specification changes for  
product improvement without prior notice. The performance  
specification figures indicated are nominal values of production  
units. There may be some deviations from these values in  
individual units.  
Dimensions  
Width: 11-1/8" (282 mm)  
Height: 4-7/16" (113 mm)  
Depth: 5-29/32" (150 mm)  
Weight  
2.29 lbs. (1.04 kg)  
USB/SD Card  
General  
USB host interface Complies with USB 1.1 (Full Speed)/  
2.0 Mass Storage Class.  
Power source  
DC IN 8V  
2350mA: AC/DC adaptor  
(AC 100 - 240 V ~ 50/60 Hz)  
Support Bulk only and CBI protocol.  
9V  
(
UM-2/SUM-2, R14/CC)  
x
6
Clock Backup: 3V  
AA) x 2  
(UM-3/SUM-3, R6/  
Support file  
Bitrate support  
Other  
MPEG 1 Layer 3  
MP3 (32 ~ 320 kbps)  
Power  
consumption  
14 W  
Maximum total number of MP3 files is  
999.  
Maximum total number of folders is  
255 INCLUSIVE of root directory.  
Output power  
Front speakers:  
2 watts minimum RMS per channel into  
8 ohms from 100 Hz to 20 kHz, 10% total  
harmonic distortion.  
File system  
support  
Support USB devices with Microsoft  
Windows/DOS/FAT 12/FAT 16/ FAT  
32.  
Speaker  
1-way type speaker system  
2.5" (6.5 cm) Full Range  
2 kbyte block length for sector.  
Tuner  
Speaker maximum 4 W/Channel  
input power  
Frequency range  
FM: 87.5 - 108.0 MHz  
Speaker rated  
input power  
2 W/Channel  
Output terminals  
Video output: 1Vp-p  
Input terminals  
Auxiliary (audio signal):  
500 mV/47 k ohms  
 
29  
MEMO  
 
MEMO  
 
CONSUMER LIMITED WARRANTY  
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when ship in its original container,  
will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a  
new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.  
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of which has  
been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in  
design or construction.  
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer.  
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED WARRANTIES INCLUDING  
.
THE WARRANTIES OF MERCHANTABILITYAND FITNESS FOR USEARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW  
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.  
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any  
warranties beyond the time period described herein on behalf of Sharp.  
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser.  
Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the  
purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event  
shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone  
other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some states  
do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you.  
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.  
Model Specific Section  
DK-CL5P MUSIC SYSTEM FOR iPod & iPhone  
Your Product Model Number & Description:  
(Be sure to have this information available when you need service for your Product.)  
Warranty Period for this Product:  
One (1) year parts and labor from the date of purchase.  
Additional Item(s) Excluded from Warranty Coverage (if any): Non-functional accessories, supplies, and consumable items.  
Where to Obtain Service:  
At a Sharp Authorized Servicer located in the United States.  
To find a location of the nearest SharpAuthorized Servicer, call Sharp toll free at 1-800-BE-SHARP.  
What to do to Obtain Service:  
Ship your Product prepaid to a Sharp Authorized Servicer.  
Be sure to have Proof of Purchase available. If you ship the Product, be sure it is insured and  
packaged securely.  
TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP.  
SHARP ELECTRONICS CORPORATION  
Sharp Plaza, Mahwah, New Jersey 07495 - 1163  
Printed in China  
92L87500034101  
10K R KI 1  
 

Sennheiser Power Supply SDC 3000 PS 25 User Manual
Sharp Projector XR 30S User Manual
Sony Blu ray Player BDP N460 User Manual
Sony Camcorder Accessories SPK HCC User Manual
Sony CD Player ATRAC3 User Manual
Sony Clock Radio ICF C113V User Manual
Sony Flat Panel Television XBR43X800D User Manual
Sony Speaker System SA VS310 User Manual
Sony VCR SVO 1330 User Manual
Sunrise Medical Mobility Aid New Zippie TS User Manual