Specialized Bicycle Accessories Stumpjumper Adjustable Dropout User Manual

INSTALLATION GUIDE  
SUBJECT: Stumpjumper Adjustable Dropout Installation  
FROM: Engineering Department  
DATE: 06/22/07  
To ensure correct installation of the adjustable dropouts, please read and familiarize yourself  
with the following steps:  
Please read the following instructions. If you have any doubt regarding your mechanical ability and/or installation of  
this product, visit your local authorized dealer. Specialized recommends that the dropouts be installed using a torque  
wrench, by a qualified mechanic.  
1
2
Stumpjumper  
Left Dropout  
9898-4230  
Stumpjumper  
Right Dropout  
9898-4235  
The bikes are equipped with one left and two right dropouts  
(with and without the derailleur hanger tab). After-Market  
dropouts are offered with the built-in derailleur hanger only  
and can be used with gears or as a single-speed dropout.  
Install the left and right dropouts. The threaded steel backing  
plates are side-specific and must match the correct side dropouts.  
Do not tighten the dropout bolts yet, leave them 1/4 turn loose.  
NOTE: Make sure the bolt threads and washers are greased.  
3
4
Install the rear wheel in the loose dropouts. Tightening the  
quick-release will self-align the wheel and dropouts.  
Install the disc brake.  
 

Shark Iron GI576 User Manual
Shark Vacuum Cleaner EP730 User Manual
Sharp Air Cleaner FP N25CX User Manual
Sharp Doll CD SW200E User Manual
Sigma Video Games F17S07701 User Manual
Sony Battery Charger AC VQ850 User Manual
Star Manufacturing Toaster DT14 User Manual
StarTechcom Computer Hardware RS 485 422 User Manual
Sun Microsystems Network Card Ethernet PCI Adapter User Manual
Tanaka Edger TPE 2510 User Manual