Acu Rite Grill Accessory 869 User Manual

2. Remote Pager:  
Instruction Manual  
Button  
MODE  
+, HR  
-, MIN  
HR & MIN  
START/STOP Timer start/ stop  
ON/OFF  
ALARM  
Press functions  
Select clock or timer  
Hour advance  
MIN advance  
Press at same time to clear timer Fast advance  
Hold 2 Seconds  
00869 Barbecue Thermometer/Timer  
Fast advance  
Fast advance  
FEATURES:  
• RF433MHz Wireless temperature transmission for convenient  
BBQ or oven cooking  
• 3-line LCD shows cook temperature, set temperature an timer for  
BBQ or Oven cooking.  
slide switch turn power on/ off  
slide switch turn temp alarm on/ off  
Set-Up:  
1. Battery Installation:  
• Remote Pager with LCD showing Timer or Clock  
• 23 hr 59 min Timer on main unit  
- Install 2 pcs AAA batteries to the main unit and the transmitter  
respectively.  
• 23 hr 59 min Timer on remote pager  
• High Temperature Probe that withstands temperatures up to 700 F,  
with a 3 ft cable  
• Compact wireless remote pager with temperature alert, timer, and  
clock functions  
• Temperature alert for both main unit and remote pager  
• Double magnet for metal surface attachment  
• Remote Pager out of range alert, 100 ft transmission range, FCC  
complied  
- Turn on the main unit and then the receiver. Slide the power  
switch located on the side of the unit, to ON position  
- The opposite side of the main unit and the remote pager is the  
alarm switch. Slide to ON position to turn on.  
- Insert probe into main unit.  
- If the receiver failed to receive signal from the transmitter, the  
“RANGE OUT” icon will appear and the beeper will sound. Press  
any key to stop alarm. To disable the alarm, please slide the alarm  
switch to OFF  
• Metal Probe wide temperature range 14 F to 392 F ( -10 C to 200 C )  
• Low battery indicator  
2. Setting Up Clock & Thermometer for the main unit:  
Press the MODE button to display clock  
Hold the MODE button for 3 seconds until the time flash, press HR  
and MIN to adjust  
Press MODE to confirm  
Press HR or MIN to select 12 or 24 hour mode  
Press MODE to confirm  
• Main unit requires 2 – “AAA” batteries  
• Remote pager requires 2 – “AAA” batteries  
Name/ Function of Buttons  
1. Transmitter Main Unit:  
Button  
MODE  
+, HR  
Press function  
Select Timer/ Clock  
Temp advance, HR advance  
Hold 2 seconds  
Clock set  
Fast advance  
Press HR or MIN to select C or F  
(press hr + min when timer stopped = clear timer)  
- , MIN  
Temp backward, MIN advance  
Fast adjust  
Fast advance  
Press MODE to confirm and exit  
HR & MIN Press at same time to clear timer  
START/STOP Timer start/ stop  
ON/OFF Push ON/OFF switch.  
3. Setting up clock for Remote Pager  
Press MODE button to select clock display  
Hold MODE key 3 second until time flash  
Press HR, MIN to adjust time  
ALARM Slide switch turn temp alarm on and off  
Press MODE to confirm or exit  
4. To Set Temperature for the main unit:  
Press the MODE button to display clock  
Trade Name:  
Model Number: 00869SBCA  
Press + or – to adjust the desired temperature. Fast advance feature  
available. Hold + or – down for 2 seconds to activate fast advance.  
Press MODE to confirm  
5. To Set Timer for the main unit:  
Press the MODE button to display timer  
Press HR or MIN to enter desired count down time. Fast advance  
feature available.  
Press HR or MIN down for 2 seconds to activate fast advance.  
Press Start/Stop to start and stop timer.  
To reset timer, stop the timer then press HR and MIN at the same time.  
6. To set the timer on the Remote Pager  
Press the MODE button to display timer  
Press HR or MIN to enter desired count down time.  
Press HR or MIN down for 2 seconds to activate fast advance.  
Press Start/Stop to start and stop timer.  
LIMITED WARRANTY Should this product from the Chaney  
Instrument Co. prove to be defective in material or workman-  
ship within one year of original purchase it will be repaired or  
replaced. This warranty does not cover damage in shipment or  
failure caused by tampering, carelessness or abuse.  
Chaney Instrument Company  
965 Wells Street  
Lake Geneva, Wisconsin 53147  
Toll-free 24-hour support hotline: 1 (877) 221-1252  
To reset timer, stop the timer then press HR and MIN at the same time.  
The Main Unit will sound an alarm when the probe is at the  
desired temperature or when the count down timer is complete.  
The remote pager will sound an alarm when 4 different situations  
occur: when the remote pager and the main unit is out of range,  
when the main unit probe is at the desired temperature, when the  
main unit count down timer is complete, or when the remote  
pager count down timer is complete. Note: The main unit count  
down timer and remote pager count down timer is not synchro-  
nized and therefore the alarm on the remote pager will sound  
when the main unit count down timer is complete OR when the  
remote pager count down timer is complete.  
Meat-Taste temperature table is printed on the back of the main  
unit.  
TO SAVE BATTERIES PLEASE TURN POWER TO OFF  
AFTER USE.  
 

ABC Office Paper Shredder FD 415 User Manual
ADC Switch Radiator II User Manual
Addonics Technologies Network Card ST5BDVES User Manual
ADTRAN Network Card SHDSL NxNTU User Manual
ADTRAN Power Supply ATLAS 890 User Manual
AEG Refrigerator C 8 16 41 I User Manual
Alpine Stereo Amplifier MRP F550 User Manual
American Audio Speaker XSP A User Manual
American Standard Hot Tub 2425E SERIES User Manual
Behringer Music Mixer AUTOCOM PRO XL MDX1600 User Manual