User Manual
PCM-9587
Onboard Intel® Celeron M EBX
SBC with Audio, VGA, LCD,
SATA
Packing List
Before you begin installing your card, please make sure that the following materials
have been shipped:
„
„
„
„
„
„
•1 PCM-9587 all-in-one single board computer
•1 CD disk for utility and drivers
•1 startup manual
•1 Mini Jumper*10 PCS Package (p/n: 9689000002)
1 ATX power cable (p/n:1700001112)
1 X Heatsink (50*50*30mm)
If any of these items are missing or damaged, contact your distributor or sales repre-
sentative immediately.
Order Information
L2
Cache
10/100
LAN
RS-232/ LPT/FDD/
PC/ PCI Mini Thermal Operation
Part No.
CPU
CRT LVDS DVI TV out
Audio USB2.0 RS-232
CF SATA
422/485
KB/MS
104+ Slot PCI Solution
Temp.
0~60°C
0~60°C
PCM-9587F-M0A1E Celeron M 600 MHz
PCM-9587F-S0A1E Celeron M 1.0 GHz
512 KB Yes 36-bit Yes Optional
0 KB Yes 36-bit Yes Optional
1
1
1
1
Yes
Yes
Yes
Yes
4
4
4
4
3
3
3
3
1
1
1
1
Yes
Yes
Yes
Yes
Yes
2
2
2
2
Yes
Yes
Yes
Yes
1
1
1
1
1
1
1
1
Passive
Passive
Yes
PCM-9587Z-M0A1E Celeron M 600 MHz
PCM-9587Z-S0A1E Celeron M 1.0 GHz
512 KB Yes 36-bit Yes Optional
0 KB Yes 36-bit Yes Optional
Yes
Passive -20~80°C
Passive -20~80°C
Yes
PS: 48-bit LVDS possible btu need to confirm with AE for evaluation
Optional accessories
Part No.
Description
PCM-10586-6200E
17030506
Wiring kit for PCM-9582/9587
TV-out cable
1703100260
USB cable (26 cm)
USB cable (12 cm)
1703100121
PCM-110-00A3E
PCM-120-00A3E
PCM-200-00A2E
MIO-3120-00A1E
MIO-3121-00A1E
MIO-3140-00A1E
MIO-3150-00A1E
MIO-3130-00A1E
MIO-3131-00A1E
1-slot PCI riser card for 5.25” biscuits
2-slot PCI riser card for 5.25” biscuits
PCI-104 to PCI bus module
Mini PCI interface to Wireless 802.11 b/g communication module
Mini PCI to 4 COM Module
Mini PCI interface to SATA storage module
Mini PCI interface to video capture module
Mini PCI interface to Dual LAN Communication Module
Mini PCI interface to Single Giga LAN Communication Module
iii
PCM-9587 User Manual
Declaration of Conformity
FCC Class A
This device complies with the requirements in part 15 of the FCC rules: Operation is
subject to the following two conditions:
1.This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation
This equipment has been tested and found to comply with the limits for a Class A dig-
ital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Opera-
tion of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
Caution! There is a danger of a new battery exploding if it is incorrectly installed.
Do not attempt to recharge, force open, or heat the battery. Replace the
battery only with the same or equivalent type recommended by the man-
ufacturer. Discard used batteries according to the manufacturer’s
instructions.
Technical Support and Assistance
the latest information about the product.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before you call:
– Product name and serial number
– Description of your peripheral attachments
– Description of your software (operating system, version, application software,
etc.)
– A complete description of the problem
– The exact wording of any error messages
PCM-9587 User Manual
iv
Features.................................................................................................... 2
Specifications............................................................................................ 2
Board layout: dimensions.......................................................................... 4
2.19.2 Network boot............................................................................... 15
v
PCM-9587 User Manual
DIO connector (CN19) ............................................................................ 16
System test and initialization................................................................... 22
4.2.11 Set Password.............................................................................. 27
Save & Exit Setup................................................................................... 28
5.1.1 Chipset........................................................................................ 30
5.1.3 Display types .............................................................................. 30
PCM-9587 User Manual
vi
Features.................................................................................................. 40
Installation of Ethernet Driver.................................................................. 40
Timer...................................................47
.................................................................................. 52
DVI Connector (CN9).............................................................................. 55
vii
PCM-9587 User Manual
Mechanical Drawings.............................................................................. 72
PCM-9587 User Manual
viii
1.1 Introduction
The PCM-9587 series is a EBX SBC (Single Board Computer) designed with the
powerful Intel Celeron M processor, and Intel 852GM and 6300ESB chipsets, which
supports Dynamic Video Memory Technology For maximum performance. PCM-
9587 also supports one 184 PIN DIMM socket for ECC DDR memory up to 1GB.
These chipsets are specifically for embedded computing and provide an optimized
on-board integrated graphics solution.
Other on-board features include 1 EIDE, 2 SATAs, 1 FDD, 1 LPT, 4 USB2.0, 4 serial
ports(3 x RS-232 and 1 x RS-232/422/485), PS/2 KeyBoard/mouse, watchdog. The
SSD solution supports Type I/II CompactFlash cards.
The PCM-9587 complies with EBX form factor (Embedded Board eXpandable). It is
compact and suitable for embedded applications, yet large enough to contain the
functions of a full embedded computer system. The EBX system expansion is based
on popular existing industry standards-PC/104TM, PCI, and PC/104-PlusTM, hence
the PC/104-Plus interface on PCM-9587 brings the advantages of a wide variety of
embedded system expansion modules. The expandability can also be fulfilled by the
MiniPCI socket on the solder side.
1.2 Features
„
Embedded Intel® Celeron® M 600 MHz/Celeron® M 1.0 GHz
„
Supports ECC DDR memory up to 1 GB, accept 128/256/512/1024 MB
DDR200/266 DRAM
„
„
„
„
„
„
EBX form factor standard and support for PC/104-Plus bus
Supports 10/100Base-T Ethernet
Supports up to two channel 36-bit LVDS interface
Wide temperature optional
2 x SATA 150 (RAID 0/1), 4 x COM, 4 x USB 2.0, 8 bit GPIO
Support PC/104-Plus (PCI + 8-bit ISA), Mini PCI and 1 x PCI Slot
1.3 Specifications
Standard SBC Functions
„
„
„
CPU: Supports onboard Celeron® M processor
BIOS: Award 4 Mbit byte Flash memory
System memory: One 184 pin DIMM sockets, support ECC
Double Data Rate (DDR)128 MB to 1 GB, accepts 128/256/512/1000 MB
DDR200/266 DRAM.
„
„
System chipset:Intel 852GM GMCH/6300ESB Chipset 400MHz FSB
Enhanced IDE interface: One Enhanced IDE interface supports 2 IDE devices.
PIO mode 3 or mode 4, Ultra DMA 100 transfer. 2 Serial ATA standard connec-
tor to support SATA 150
„
„
„
„
FDD interface: Supports one FDD
Serial ports: Three serial RS-232 ports, one serial RS-232/422/485 ports
Parallel port: One parallel port, supports SPP/EPP/ECP mode
Keyboard/mouse connector: Supports standard PS/2 keyboard and a PS/2
mouse
„
Power management: APM Rev. 1.2 compliant power management ACPI sup-
port
PCM-9587 User Manual
2
„
Watchdog timer: Winbond W83627, 255 levels timer interval, setup by soft-
ware
„
„
„
„
USB: Four USB 2.0 compliant host ports
IrDA: N/A
GPIO: 8-bit general purpose input/output
Expansion: PC/104 Plus(support 8bit ISA, not support ISA DMA mode), PCI
and miniPCI
Solid State Disk
„
Supports one 50-pin socket for CFC type I/II
VGA/LCD Interface
„
„
Chipset: Intel 852GM
Frame buffer: Optimized Shared Memory Architecture, supports up to 64MB
frame buffer using system memory
„
„
Interface: 4x AGP VGA/LVDS interface
Display mode: CRT Modes: pixel resolution up to 1600 x 1200 at 85-Hz and
2048 x 1536 at 75-Hz
„
„
LCD mode: Dual channel LVDS panel support up to UXGA panel resolution
with frequency range from 25-MHz to 112-MHz
LVDS: Supports 2 channel (48-bit) LVDS LCD panel
TV-Out/DVI (TV out optional by request)
„
„
„
Chipset: Chrontel CH7009
Supports composite, s-video or RGB output
Supports NTSC and PAL formats
Ethernet interface
„
„
„
„
„
„
Chipset:
Intel 82551ER /82551QM optional
Ethernet interface:
IEEE 802.3u 100 BASE-T Fast Ethernet compatible (PCM-9587)
I/O address switchless setting
Built-in boot ROM
Audio Function
„
„
„
Chipset: 6300ESB, Audio codec ALC 650
Audio controller: AC’97 3D surround stereo sound
Supports Speaker out, CD-input, Line-in, Line-out, Microphone
Mechanical and Environmental
„
„
„
„
„
„
„
„
Dimensions: (L x W)203 x 146 mm (8" x 5.75")
Power supply Voltage:ATX, with Vcore 2 phase, +5V power only can work
Power Requirement: (Celeron M 600 with 256MB)
Max: 2.63A@ 5V, 0.03A @ 12V
Typical: 2.62A@ 5V, 0.03A @ 12V
Operating temperature:0 ~ 60° C (32~140° F)
Operating Humidity:0% ~ 90% Relative Humidity, non-condensing
Weight: 0.85 kg (weight of total package)
3
PCM-9587 User Manual
2.1 Jumpers
The PCM-9587 has a number of jumpers that allow you to configure your system to
suit your application. The table below lists the functions of the various jumpers.
Table 2.1: Jumpers
Label
Function
J1
J2
J3
J5
LCD Voltage Select
PC104+ VIO Select
Clear CMOS function Select
COM2 RS232/422/485 function Select
2.1.1 Jumpers setting drawing
Table 2.2: J1: LCD Voltage Select
PIN
FUNCTION
1-2
2-3
+3.3 V*
+5 V
1
2
3
1
2
3
Table 2.3: J2: PC104+ VIO Select
PIN
FUNCTION
1-2
2-3
VIO = +5 V *
VIO = +3.3 V
1
2
3
1
2
3
Table 2.4: J3: Clear CMOS function Select
PIN
FUNCTION
1-2 Open
1-2 Close
Normal*
Clear CMOS
1
2
PCM-9587 User Manual
6
Table 2.5: J5: COM2 RS 232/422/485 Select
PINS
RS-232
RS-422
RS-485
1,2
Open
Open
Close
Close
Close
Open
Open
Close
Close
Open
Open
Open
Close
Open
Open
Open
Close
Close
Open
Open
Close
Close
Close
Open
Open
Open
Open
Close
Close
Open
Open
Close
Close
3,4
5,6
7,9
8,10
9,11
10,12
13,15
14,16
15,17
16,18
2 .. .. .. .. .. .. .. 18
○ ○ ■ ■ ■ ○ ■ ■ ○
RS-232
■
□ ○
■ ■ ○ ■ ■ ○
1 .. .. .. .. .. .. .. 17
2
.. .. .. .. .. .. .. 18
○ ■ ○ ○ ■ ■ ○ ■ ■
RS-422
RS-485
■
□
○ ○ ■ ■ ○ ■ ■
1
.. .. .. .. .. .. .. 17
2 .. .. .. .. .. .. .. 18
■ ○ ○ ○ ■ ■ ○ ■ ■
■
○ ○ ○ ■ ■ ○ ■ ■
1 .. .. .. .. .. .. .. 17
7
PCM-9587 User Manual
2.2 Connectors
On-board connectors link the PCM-9587 to external devices such as hard disk
drives, a keyboard, or floppy drives. The table below lists the function of each of the
board’s connectors.
Table 2.6: Connectors
Label
CN1
Function
LCD Backlight connector
TV-out connector (TV out optional by request)
CD-IN connector
CN2
CN3
CN4
Audio output connector
Power input connector
-12V and -5V connector
VGA connector
CN5
CN6
CN7
CN8
LVDS connector
CN9
DVI connector
CN10
CN11
CN12
CN13
CN14
CN15
CN16
CN17
CN18
CN19
CN20
CN21
CN22
CN23
CN24
CN25
CN26
CN27
CN28
CN29
CN30
PCI1
Gigabit LAN connector(Optional)
10/100M LAN connector
Gigabit LAN led connector(Optional)
System FAN connector
Floppy connector
Primary HDD connector
Printer port connector
PC104 and PC104+ connector
USB port 3/4
DIO connector
USB port 1/2
COM port 1/2/3/4 connector
Front panel connector
SATA connector 1
SATA connector 2
CPU FAN connector
Extension SMBUS connector
KB / Mouse connector
CPU FAN connector (wafer box)(Optional)
MINI-PCI connector
CompactFlash card connector
Extension PCI slot
PCM-9587 User Manual
8
|