Owner’s manual
Mode d’emploi
Bedienungsanleitung
Istruzioni per l’uso
Gebruiksaanwijzing
Manual de instrucciones
Bruksanvisning
Manual de instruções
DXZ388RUSB
DXZ389RUSB
DXZ389RGUSB
CD/USB/MP3/WMA/AAC RECEIVER WITH CeNET CONTROL
AUTORADIO CD/USB/MP3/WMA/AAC / AVEC COMMANDE CeNET
CD/USB/MP3/WMA/AAC-RECEIVER MIT CeNET-STEUERUNG
SINTOLETTORE CD/USB/MP3/WMA/AAC CON CONTROLLO CeNET
CD/USB/MP3/WMA/AAC-RADIO-COMBINATIE MET CeNET-BEDIENING
RECEPTOR CD/USB/MP3/WMA/AAC CON CONTROL CeNET
CD/USB/MP3/WMA/AAC-RADIO MED CeNET-KONTROLL
RECEPTOR CD/USB/MP3/WMA/AAC COM CONTROLO CeNET
Thank you for purchasing this Clarion product.
∗ Please read this owner’s manual in its entirety before operating this equipment.
∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).
∗ Check the contents of the enclosed warranty card and keep it carefully with this manual.
Contents
1. FEATURES...................................................................................................................................... 4
2. PRECAUTIONS ............................................................................................................................... 4
Handling Compact Discs.................................................................................................................. 5
3. CONTROLS ..................................................................................................................................... 6
Names of the Buttons and Their Functions...................................................................................... 6
Display Items.................................................................................................................................... 8
Display Screen ................................................................................................................................. 8
4. DCP (DETACHABLE CONTROL PANEL)...................................................................................... 9
5. REMOTE CONTROL ..................................................................................................................... 10
Functions of Remote Control Unit Buttons..................................................................................... 10
Inserting the Battery ....................................................................................................................... 12
6. OPERATIONS................................................................................................................................ 13
Basic Operations............................................................................................................................ 13
Radio Operations ........................................................................................................................... 17
Radio Data System Operations...................................................................................................... 19
CD/MP3/WMA/AAC Operations..................................................................................................... 23
Operations Common to Each Mode............................................................................................... 27
7. ACCESSORIES ............................................................................................................................. 30
USB/MTP Operations..................................................................................................................... 30
iPod Operations.............................................................................................................................. 32
Bluetooth BB Operations................................................................................................................ 34
CD Changer Operations................................................................................................................. 37
8. TROUBLESHOOTING................................................................................................................... 39
9. ERROR DISPLAYS ....................................................................................................................... 41
10. SPECIFICATIONS ......................................................................................................................... 42
11. OTHERS ........................................................................................................................................ 42
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB
3
1. FEATURES
• USB Direct Connection for iPod® & Digital Media
• Front-panel auxiliary input & 6ch RCA output
• Bluetooth Ready via CeNET
∗ “iPod” is for legal or rightholder-authorized copying only. Don’t steal music.
“iPod” is a trademark of Apple Inc., registered in the U.S. and other countries.
2. PRECAUTIONS
1. This unit is applicable for on-road 4 wheel
INFORMATION FOR USERS:
vehicle purpose only. Use for tractor, fork
CHANGES OR MODIFICATIONS TO THIS
truck, bulldozer, off road vehicle, 2 or 3
wheel motor bicycle, marine boat or other
special purpose vehicle is not appropriate.
PRODUCT NOT APPROVED BY THE
MANUFACTURER WILL VOID THE
WARRANTY.
2. When the inside of the car is very cold and
the player is used soon after switching on the
heater moisture may form on the disc or the
optical parts of the player and proper
playback may not be possible. If moisture
forms on the disc, wipe it off with a soft cloth.
If moisture forms on the optical parts of the
player, do not use the player for about one
hour. The condensation will disappear
naturally allowing normal operation.
3. Driving on extremely bumpy roads which
cause severe vibration may cause the sound
to skip.
4
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.
Handling Compact Discs
Use only compact discs bearing the
or
Storage
• Do not expose compact discs to direct
sunlight or any heat source.
mark.
Do not play heart-shaped, octagonal, or other
specially shaped compact discs.
• Do not expose compact discs to excess
humidity or dust.
Some CDs recorded in CD-R/CD-RW mode
may not be usable.
• Do not expose compact discs to direct heat
from heaters.
Handling
Cleaning
• Compared to ordinary music CDs, CD-R and
CD-RW discs are both easily affected by high
temperature and humidity and some of CD-R
and CD-RW discs may not be played.
Therefore, do not leave them for a long time
in the car.
• To remove fingermarks and dust, use a soft
cloth and wipe in a straight line from the
center of the compact disc to the
circumference.
• Do not use any solvents, such as
commercially available cleaners, anti-static
spray, or thinner to clean compact discs.
• New discs may
have some
Ball-point pen
• After using special compact disc cleaner, let
the compact disc dry off well before playing it.
roughness
Roughness
around the
edges. If such
discs are used,
the player may
not work or the
sound may skip. Use a ball-point pen or the
like to remove any roughness from the edge
of the disc.
• Never stick labels on the surface of the
compact disc or mark the surface with a
pencil or pen.
• Never play a compact disc with any
cellophane tape or other glue on it or with
peeling off marks. If you try to play such a
compact disc, you may not be able to get it
back out of the CD player or it may damage
the CD player.
• Do not use compact discs that have large
scratches, are misshapen, cracked, etc. Use
of such discs may cause misoperation or
damage.
• To remove a compact disc from its storage
case, press down on the center of the case
and lift the disc out, holding it carefully by the
edges.
• Do not use commercially available CD
protection sheets or discs equipped with
stabilizers, etc. These may damage the disc
or cause breakdown of the internal
mechanism.
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB
5
3. CONTROLS
Names of the Buttons and Their Functions
[
]
IR RECEIVER
[
]
[
], [
]
[
]
CD SLOT
[
]
RELEASE
[
]
USB SLOT
[
] (EJECT)
[
]
AUX
[
]
[
]
SOUND
SRC
[
]
[
]
DIRECT
BND
[
]
[
[
RPT
]
]
ROTARY
RDM
]
[
]
DISP
[
]
[
TA
SCN
[RELEASE] button
• Press the [RELEASE] button to unlock the
DCP.
[SOUND] button
• Use the button to switch to the sound adjust
mode.
• Press and hold the button for 1 second or
longer to turn on or off the MAGNA BASS
EXTEND mode.
[
] button
• Perform preset scan while in the radio mode.
When the button is pressed and held, auto
store is performed.
[DIRECT] buttons
• Play or pause a track while in the CD/MP3/
WMA/AAC mode.
• Store a station into memory or recall it directly
while in the radio mode.
• Confirm various settings.
[RDM] button
• Perform random play while in the CD/MP3/
WMA/AAC mode.
[w] (UP), [z] (DN) buttons
• Select the folder while in the MP3/WMA/AAC
mode.
• Press and hold the button for 1 second or
longer to perform folder random play while in
the MP3/WMA/AAC mode.
• Use the buttons to perform various settings.
[IR RECEIVER]
• Receiver for remote control unit. (Operating
range: 30° in all directions)
[RPT] button
• Perform repeat play while in the CD/MP3/
WMA/AAC mode.
[CD SLOT]
• CD insertion slot.
• Press and hold the button for 1 second or
longer to perform folder repeat play while in
the MP3/WMA/AAC mode.
[USB SLOT]
• USB memory/MTP/iPod devices insertion
slot.
[AUX] input jack
• The input jack for connecting an external
device.
6
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.
Names of the Buttons and Their Functions
[SCN] button
• Perform scan play for 10 seconds of each
track while in the CD/MP3/WMA/AAC mode.
[SRC] button
• Press the button to turn on the power.
• Press and hold the button for 1 second or
longer to turn off the power.
• Press and hold the button for 1 second or
longer to perform folder scan play while in the
MP3/WMA/AAC mode.
• Switch the operation mode among the radio
mode, etc.
[TA] button
• Use the button to set the TA (Traffic
Announcement) standby mode.
[x], [v] buttons
• Select a station while in the radio mode or
select a track while in the CD/MP3/WMA/AAC
mode.
[DISP] button
• Switch the display indication.
This button is used to make various settings.
• Press and hold the button for 1 second or
longer to enter the adjust mode.
• Press and hold the button for 1 second or
longer to enter the fast-forward or fast-
backward mode.
[ROTARY] knob
• Adjust the volume by turning the knob
clockwise or counterclockwise.
[Q] (EJECT) button
• Eject a disc when it is loaded into the unit.
[BND] button
• Switch the band, or seek tuning or manual
tuning while in the radio mode.
• Play a first track while in the CD/MP3/WMA/
AAC mode.
• Press the button to change the character.
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB
7
Display Items
Operation status indication
Source, titles, function, setting, clock, etc. are displayed.
: MUTE indication
: Alternative frequency indication
: Disc No. indication
Preset channel indication (1 to 6)
AF
: Enter indication
REG
TA
TP
PTY
MANU
: Regional indication
: Traffic announcement indication
: Traffic programme indication
: Programme type indication
: Manual indication
: Bluetooth indication
: MP3 indication
: WMA indication
AAC : AAC indication
MP3
WMA
Display Screen
In extreme cold, the screen movement may slow down and the screen may darken, but this is normal.
The screen will recover when it returns to normal temperature.
8
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.
4. DCP (DETACHABLE CONTROL PANEL)
The control panel can be detached to prevent
Storing the DCP in the DCP Case
theft. When detaching the control panel, store it
Hold the DCP, in the orientation as shown in the
in the DCP (DETACHABLE CONTROL PANEL)
figure below, and put it into the supplied DCP
case. (Ensure the DCP is in the correct
orientation.)
case to prevent scratches.
We recommend taking the DCP with you when
leaving the car.
Removing the DCP
DCP
1. Press the [SRC] button for 1 second or
longer to switch off the power.
2. Press in the [RELEASE] button.
[
] button
RELEASE
DCP case
CAUTION
• The DCP can easily be damaged by
shocks. After removing it, be careful not to
drop it or subject it to strong shocks.
• When the Release button is pressed and
the DCP is unlocked, the car’s vibrations
may cause it to fall. To prevent damage to
the DCP, always store it in its case after
detaching it.
∗ The DCP is unlocked
3. Remove the DCP.
• The connector connecting the main unit
and the DCP is an extremely important
part. Be careful not to damage it by
pressing on it with fingernails, pens,
screwdrivers, etc.
DCP
Main Unit Front
DCP Rear Panel
Attaching the DCP
1. Insert the right side of the DCP into the main
unit.
2. Insert the left side of the DCP into the main
unit.
DCP
connector
Main unit connector
2.
Note:
• If the DCP is dirty, wipe off the dirt with a soft, dry
cloth only.
DCP
1.
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB
9
5. REMOTE CONTROL
Functions of Remote Control Unit Buttons
∗ Some buttons on the remote control unit have different functions from the corresponding buttons on the main
unit.
Signal transmitter
[
]
]
[
[
]
SRC
BND
]
[
[
], [
[
], [
]
]
]
]
[
[
MUTE
DISP
[
TA
]
PTY
[
]
[
]
AF
PS/AS
[AF] button
● Shared modes
• Press to cancel an emergency broadcast
during an ALARM interrupt.
[SRC] button
• Use to alternate operation mode among the
various modes.
[PTY] button
• Press to cancel a PTY broadcast during a
PTY interrupt.
• Press to cancel a traffic announcement
broadcast, an emergency broadcast, and a
PTY broadcast during a TA, ALARM or PTY
interrupt.
[DISP] button
• Press to alternate among main display, title
display and CT (clock time) display.
[w], [z] buttons
• Increases and decreases volume.
● Radio (Radio Data System) mode
[BND] button
[MUTE] button
• Turns mute function on and off.
• Switches reception band.
[TA] button
• TA on and off.
[x], [v] buttons
• Moves preset channels up and down.
• Press to cancel a traffic announcement
broadcast during a TA interrupt.
[PS/AS] button
• Press to perform preset scan.
• Press and hold the button for 2 seconds or
longer to perform auto store.
10
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.
Functions of Remote Control Unit Buttons
[AF] button
• AF function on and off.
● CD changer mode
[BND] button
• Press to switch to next disc in ascending
order.
• Press and hold the button for 1 second or
longer to perform REG function on and off.
[PTY] button
• PTY mode on and off.
[x], [v] buttons
• Press to move the tracks up and down.
• Press and hold the button for 1 second or
longer to perform fast-forward/fast-backward.
● CD/MP3/WMA/AAC and USB/MTP
modes
[
] button
[BND] button
• Press to play the first track.
• Switches between playback and pause.
[PS/AS] button
• Press to perform scan play.
[x], [v] buttons
• Press to move the tracks up and down.
• Press and hold the button for 1 second or
longer to perform disc scan play.
• Press and hold the button for 1 second or
longer to perform fast-forward/fast-backward.
[AF] button
• Press to perform repeat play.
[
] button
• Switches between playback and pause.
• Press and hold the button for 1 second or
longer to perform disc repeat play.
[PS/AS] button
• Press to perform scan play.
[PTY] button
• When in MP3/WMA/AAC and USB/MTP
modes, press and hold the button for 1
second or longer to perform folder scan play.
• Press to perform random play.
• Press and hold the button for 1 second or
longer to perform disc random play.
[AF] button
• Press to perform repeat play.
● iPod mode
• When in MP3/WMA/AAC and USB/MTP
modes, press and hold the button for 1
second or longer to perform folder repeat
play.
[x], [v] buttons
• Press to move the tracks up and down.
• Press and hold the button for 1 second or
longer to perform fast-forward/fast-backward.
[PTY] button
• Press to perform random play.
[
] button
• Switches between playback and pause.
• When in MP3/WMA/AAC and USB/MTP
modes, press and hold the button for 1
second or longer to perform folder random
play.
[AF] button
• Press to perform repeat play.
[PTY] button
• Press to perform random play.
• Press and hold the button for 1 second or
longer to perform all random play.
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB
11
Inserting the Battery
1 Turn over the remote control unit and slide
the cover in the direction indicated by the
arrow in the illustration.
2 Insert the battery (CR2025) into the insertion
guides, with the printed side (+) facing
upwards.
3 Press the battery in the direction indicated by
the arrow so that it slides into the
compartment.
4 Replace the cover and slide in until it clicks
into place.
Notes:
Misuse may result in rupture of the battery,
producing leakage of fluid and resulting in
personal injury or damage to surrounding
materials. Always follow these safety precautions:
Insertion guide
• Use only the designated battery.
• When replacing the battery, insert properly, with
+/– polarities oriented correctly.
• Do not subject battery to heat, or dispose of in
fire or water. Do not attempt to disassemble the
battery.
• Dispose of used batteries properly.
12
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.
6. OPERATIONS
Note:
• Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 6.
Basic Operations
Adjusting the volume
1. Turning the [ROTARY] knob clockwise
CAUTION
Be sure to lower the volume before
increases the volume; turning it
switching off the unit power or the ignition
key. The unit remembers its last volume
setting. If you switch the power off with the
volume up, when you switch the power back
on, the sudden loud volume may hurt your
hearing and damage the unit.
counterclockwise decreases the volume.
∗ The volume level is from 0 (minimum) to 33
(maximum).
Switching the display
Press the [DISP] button to select the desired
display.
Turning on/off the power
Note:
∗ Once selected, the preferred display becomes
the display default. When a function
adjustment such as volume is made, the
screen will momentarily switch to that
function’s display, then revert back to the
preferred display several seconds after the
adjustment.
• Be careful about using this unit for a long time
without running the engine. If you drain the car’s
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.
1. Press the [SRC] button.
∗ For information on how to enter a title, refer to
the subsection “Entering titles” in section
“Operations Common to Each Mode”.
∗ When CT data is not received, “CT– –:– –”
appears in the display.
2. The illumination and display on the unit light
up. The unit automatically remembers its last
operation mode and will automatically switch
to display that mode.
3. Press and hold the [SRC] button for 1
second or longer to turn off the power for the
unit.
Note:
• The first time this unit is turned on after the wire
connections are completed, it must be checked
what equipment is connected. When the power
is turned on, the “S-CHECK” appears in the
display. The system check starts within the unit.
Then the unit turn to the radio mode.
Selecting a mode
1. Press the [SRC] button to change the
operation mode.
2. Each time you press the [SRC] button, the
operation mode changes in the following
order:
Radio ➜ CD/MP3/WMA/AAC ➜ USB/MTP/
iPod ➜ (TEL) ➜ (CD changer) ➜ AUX ➜
Radio...
∗ External equipment not connected with
CeNET is not displayed.
∗ iPod/MTP can connect to this unit via USB
SLOT.
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB
13
Basic Operations
When “Z+FLAT” is set:
Sound Adjustment
You can adjust a sound effect or tone quality to
your preference.
3-2. Press and hold the [
] button for 1second
or longer, bass/treble characteristics
become flat and switch to the “CUSTOM ”
mode.
To change sound setting
When “CUSTOM ” is set:
1. Press the [SOUND] button to switch to the
3-1. Press the [x] or [v] button to select the
“BASS” or “TREBLE” mode to adjust.
sound adjustment selection display.
∗ The factory default sound setting is “Z-
EHCR”.
When “EXCITE/IMPACT/B-BOOST” is set:
3-2. Press the [
] button.
2. Then press the [x] or [v] button to
3-3. Press the [w] or [z] button to adjust the
select the sound adjustment mode.
setting in the range of –3 to +3.
Each time you press the [x] or [v]
button, the sound adjustment mode
changes as following order:
∗ The factory default setting is “0”.
3-4. Press the [
] button to return to the
previous mode.
“Z-EHCR” ↔ “BASS” ↔ “TREBLE” ↔
“BALANCE” ↔ “FADER” ↔ “S-W LPF” ↔
“S-W VOL” ↔ “HPF”
● Adjusting the bass
This adjustment can be performed only when
the Z-Enhancer Plus is set to “CUSTOM ”.
∗ In the case of display blinking “ENT”, you
2-1. Select “BASS”.
can press the [
setting value.
] button to adjust the
3-1. Press the [w] or [z] button to select as
∗ The sound adjustment mode will be
displayed for 2 seconds before showing the
sound setting.
following order.
“BASS(G)” ↔ “BASS(F)” ↔ “BASS(Q)”
∗ The factory default setting is “BASS(G)”.
3. Press the [w] or [z] button to adjust the
3-2. Press the [
] button.
selected audio mode.
3-3. Press the [w] or [z] button to select the
4. After completing settings, press the
[SOUND] button to return to the previous
mode.
setting.
BASS(G) : The factory default setting is “0”.
(Adjustment range: +7 to –7)
BASS(F) : The factory default setting is “60”.
● Setting the Z-Enhancer Plus
This unit is provided with 4 types of sound tone
effects stored in memory.
(Adjustment range: 60/80/100/
200)
BASS(Q) : The factory default setting is “1”.
Select the one you prefer.
∗ The factory default setting is “OFF”.
2-1. Select “Z-EHCR”.
(Adjustment range: 1/1.25/1.5/2)
3-4. Press the [
] button to return to the
previous mode.
3-1. Each time you press the [w] or [z] button,
the tone effect changes in the following
order:
“Z+FLAT” ↔ “CUSTOM ” ↔ “EXCITE” ↔
“IMPACT” ↔ “B-BOOST” ↔ “OFF”
Z+FLAT : user Z+FLAT
CUSTOM : user custom
EXCITE : bass and treble emphasized
mid emphasized
IMPACT : bass and treble emphasized
B-BOOST : bass emphasized
OFF
: no sound effect
14
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.
Basic Operations
● Adjusting the treble
This adjustment can be performed only when
the Z-Enhancer Plus is set to “CUSTOM ”.
● Adjusting the subwoofer
You can set the low pass filter of subwoofer.
2-1. Select “S-W LPF”.
2-1. Select “TREBLE”.
3-1. Press the [w] or [z] button to select as
3-1. Press the [w] or [z] button to select as
following order.
following order.
“THROUGH” ↔ “LPF 50” ↔ “LPF 80” ↔
“LPF 120”
“TREB(G)” ↔ “TREB(F)”
∗ The factory default setting is “TREB(G)”.
∗ The factory default setting is “THROUGH”.
3-2. Press the [
] button.
● Adjusting the subwoofer output
3-3. Press the [w] or [z] button to select the
volume
setting.
You can adjust the volume output from the unit's
subwoofer output terminal.
TREB(G) : The factory default setting is “0”.
2-1. Select “S-W VOL”.
(Adjustment range: +7 to –7)
3-1. Press the [w] or [z] button to increases
TREB(F) : The factory default setting is
“10K”.
or decreases the subwoofer volume.
∗ The factory default setting is “0”.
(Adjustment range: +6 to –6)
(Adjustment range:
10K/12.5K/15K/17.5K)
∗ When the volume level is more than 30, the
subwoofer volume adjustment value can not
reach +6.
3-4. Press the [
] button to return to the
previous mode.
● Adjusting the balance
2-1. Select “BALANCE”.
● Adjusting the HPF
2-1. Select “HPF”.
3-1. Press the [w] or [z] button to adjust the
3-1. Press the [w] or [z] button to select as
balance of the right and left speakers.
following order.
∗ The factory default setting is “CENTER”
(center). (Adjustment range: RIGHT12 to
LEFT12 (right 12 to left 12))
“120” ↔ “THROUGH”
∗ The factory default setting is “THROUGH”.
∗ This is supported only with amplifiers
equipped with this function. Output is not
supported from RCA cables.
● Adjusting the fader
2-1. Select “FADER”.
3-1. Press the [w] or [z] button to adjust the
Note:
balance of the rear and front speakers.
• During SOUND adjustment mode, if no
operation is performed for more than 10
seconds, this mode can be cancelled and return
to previous mode.
∗ The factory default setting is “CENTER”
(center). (Adjustment range: FRONT12 to
REAR12 (front 12 to rear 12))
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB
15
Basic Operations
Setting the MAGNA BASS EXTEND
CT (Clock Time) function
The CT function receives CT data sent from an
“Radio Data System” station and displays the
time.
∗ If a CT data is not being received, “CT– –:– –”
appears in the display.
The MAGNA BASS EXTEND does not adjust
the low frequencies like the normal sound
adjustment function, but emphasizes the deep
bass frequencies to provide you with a dynamic
sound.
∗ The factory default setting is “OFF” (off).
Note:
• CT data is not transmitted in some countries and
by some broadcast stations. Also, in some areas,
the CT may not display accurately.
1. Press and hold the [SOUND] button for 1
second or longer to turn on the MAGNA
BASS EXTEND effect. “M-B EX” appears in
the display for 2 seconds.
2. Press and hold the [SOUND] button for 1
second or longer to turn off the MAGNA
BASS EXTEND effect.
16
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.
Radio Operations
● LOCAL SEEK
Listening to the radio
If the [x] or [v] button is pressed and held
in position for 1 second or longer, local seek
tuning will be enabled. Broadcast stations with
good reception sensitivity are selected.
∗ When local seeking starts, “LO” appears in the
display.
1. Press the [SRC] button and select the radio
mode. The frequency or PS and PTY
appears in the display.
∗ PS: Programme service name
∗ PTY: Programme type
2. Press the [BND] button and select the radio
band. Each time the button is pressed, the
radio reception band changes in the
following order:
Manual tuning
There are 2 ways available: Quick tuning and
step tuning.
F1 (FM1) ➜ F2 (FM2) ➜ F3 (FM3) ➜ AM
(MW/LW) ➜ F1 (FM1)...
When you are in the step tuning mode, the
frequency changes one step at a time. In the
quick tuning mode, you can quickly tune the
desired frequency.
3. Press the [x] or [v] button to tune in the
desired station.
1. Press the [BND] button and select the
Tuning
desired band (FM or AM (MW/LW)).
There are 3 types of tuning mode available,
seek tuning, manual tuning and preset tuning.
∗ If “MANU” is not lit in the display, press and
hold the [BND] button for 1 second or longer.
“MANU” is lit in the display and manual tuning
is now available.
Seek tuning
There are 2 types of seek tuning: DX SEEK and
LOCAL SEEK.
2. Tune into a station.
● Quick tuning
Press and hold the [x] or [v] button for 1
DX SEEK can automatically tune in to
receivable broadcast stations; LOCAL SEEK
can tune in to only broadcast stations with a
good reception sensitivity.
second or longer to tune in a station.
● Step tuning
Press the [x] or [v] button to manually tune
in a station.
1. Press the [BND] button and select the
desired band (FM or AM (MW/LW)).
∗ If no operation is performed for more than 7
seconds, manual tuning is cancelled and the
display returns to the previous mode.
2. Tune into a station.
∗ If “MANU” is lit in the display, press and hold
the [BND] button for 1 second or longer.
“MANU” in the display goes off and seek
tuning is now available.
∗ If “TA” is lit in the display, TP stations are
automatically sought.
● DX SEEK
Press the [x] or [v] button to automatically
seek a station.
When the [v] button is pressed, the station is
sought in the direction of higher frequencies; if
the [x] button is pressed, the station is sought
in the direction of lower frequencies.
∗ When seek tuning starts, “DX” appears in the
display.
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB
17
Radio Operations
Recalling a preset station
Preset scan
Preset scan receives the stations stored in
preset memory in order. This function is useful
when searching for a desired station in memory.
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio
stations in memory. Press the corresponding
[DIRECT] button or the [w] / [z] button to
recall the stored radio frequency automatically.
1. Press the [
2. When a desired station is tuned in, press the
] button again to continue receiving that
station.
Note:
• Be careful not to press and hold the [
] button.
1. Press the [BND] button and select the
[
desired band (FM or AM (MW/LW)).
2. Press the corresponding [DIRECT] button or
the [w] / [z] button to recall the stored
station.
] button
for 2 seconds or longer, otherwise the auto store
function is engaged and the unit starts storing
stations.
Note:
• Press and hold one of the [DIRECT] buttons for 2
seconds or longer to store that station into preset
memory.
Manual memory
1. Select the desired station with seek tuning or
manual tuning.
2. Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into preset memory.
Auto store
Auto store is a function for storing up to 6
stations that are automatically tuned in
sequentially. If 6 receivable stations cannot be
received, a previously stored station remains
unoverwritten at the memory position.
1. Press the [BND] button and select the
desired band (FM or AM (MW/LW)).
2. Press and hold the [
] button for 2 seconds
or longer. The stations with good reception
are stored automatically to the preset
channels.
18
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.
Radio Data System Operations
4. Press the [DISP] button to return to the
Radio Data System
This unit has a built-in “Radio Data System”
decoder system that supports broadcast
stations transmitting “Radio Data System” data.
previous mode.
∗ If the reception of the current broadcast station
deteriorates, “PISEARCH” appears in the display
and the radio searches for the same programme
on another frequency.
This system can display the name of the
broadcast station being received (PS) and can
automatically switch to the broadcast station
with the best reception as you move long
distances (AF switching).
REG (Regional programme)
function
When the REG function is ON, the optimum
regional station can be received. When this
function is OFF, if the regional station area
switches as you drive, a regional station for that
region is received.
∗ The factory default setting is “OFF”.
Notes:
• This function is disabled when a national station
such as BBC R2 is being received.
• The REG function ON/OFF setting is valid when
the AF function is ON.
Also, if a traffic announcement or programme
type is broadcast from an “Radio Data System”
station, no matter what mode you are in, this
broadcast is received.
Additionally, if EON information is received, this
information enables automatic switching of other
preset stations on the same network and
interruption of the station being received with
traffic information from other stations (TP). This
function is not available in some areas.
When using the “Radio Data System” function,
always set the radio to FM mode.
1. Press and hold the [DISP] button for 1
second or longer to switch to the “Radio Data
System” adjustment selection display.
• AF
• PS
: Alternative Frequency
: Programme Service Name
2. Press the [x] or [v] button to select
“REG”.
3. Press the [w] or [z] button to select “ON” or
“OFF”.
• PTY : Programme Type
• EON : Enhanced Other Network
• TP
: Traffic Programme
∗ “Radio Data System” interrupt does not function
during AM radio reception or in TV mode.
∗ When set receives “Radio Data System” signal,
and can read PS data, PS appears in the display.
• ON:
“REG” in the display lights and REG function
turns on.
• OFF:
“REG” in the display goes off and REG
function turns off.
AF function
The AF function switches to a different
frequency on the same network in order to
maintain optimum reception.
4. Press the [DISP] button to return to the
previous mode.
∗ The factory default setting is “ON”.
1. Press and hold the [DISP] button for 1
second or longer to switch to the “Radio Data
System” adjustment selection display.
2. Press the [x] or [v] button to select
“AF”.
3. Press the [w] or [z] button to select “ON” or
“OFF”.
• ON:
“AF” in the display lights and AF function
turns on.
• OFF:
“AF” in the display goes off and AF function
turns off.
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB
19
Radio Data System Operations
Manually tuning a regional station
in the same network
1. This function is valid when the AF function is
ON and the REG function is OFF.
Auto store function for TP stations
You can automatically store up to 6 TP stations
into preset memory. If the number of TP can be
received less than 6, broadcast stations already
stored in memory and left without being
overwritten.
Note:
• This function can be used when a regional
broadcast of the same network is received.
As “TA” lit in the display, press and hold the
[
] button for 2 seconds or longer. The TP
2. Press any one of the [DIRECT] buttons to
stations with the good reception sensitivity are
stored into preset memory.
∗ Even if you select FM1 or FM2, a TP station is
stored into memory for FM3.
call out the regional station.
3. If the reception condition of the called out
station is bad, press the [DIRECT] button of
the same number. The unit receives a local
station on the same network.
PTY (Programme Type)
This function enables you to listen to a
broadcast of the selected programme type even
if the unit is on a function mode other than radio.
∗ Some countries do not yet have PTY broadcast.
∗ In the TA standby mode, a TP station has priority
over a PTY broadcast station.
TA (Traffic Announcement)
In the TA standby mode, when a traffic
announcement broadcast starts, the traffic
announcement broadcast is received as top
priority regardless of the function mode so you
can listen to it. Traffic programme (TP)
automatic tuning is also possible.
∗ The factory default setting is “OFF”.
1. Press and hold the [DISP] button for 1
second or longer to switch to the “Radio Data
System” adjustment selection display.
∗ This function can only be used when “TP” is lit in
the display. When “TP” is lit, this means that the
“Radio Data System” broadcast station being
received has traffic announcement programmes.
2. Press the [x] or [v] button to select
“PTY”.
● Setting the TA standby mode
If you press the [TA] button when only “TP” is lit
in the display, “TP” and “TA” light in the display
and the unit is set into the TA standby mode
until a traffic announcement is broadcast. When
a traffic announcement broadcast starts, “TRA
INFO” appears in the display. If you press the
[TA] button while a traffic announcement
broadcast is being received, the traffic
3. Press the [w] or [z] button to select “ON”
or “OFF”.
• ON:
“PTY” in the display lights and PTY standby
mode is turned on. When the selected PTY
broadcast starts, the PTY item name
appears in the display.
• OFF:
announcement broadcast reception is cancelled
and the unit goes into the TA standby mode.
“PTY” in the display goes off and PTY
standby mode is cancelled.
● Cancelling the TA standby mode
As “TP” and “TA” lit in the display, press the [TA]
button. The “TA” in the display goes off and the
TA standby mode is cancelled.
4. Press the [DISP] button to return to the
previous mode.
● Cancelling a PTY interrupt broadcast
Press the [TA] button during the PTY interrupt
broadcast, the PTY interrupt is cancelled and
the unit returns to PTY standby mode.
∗ If “TP” is not lit, pressing the [TA] button searches
for a TP station.
● Searching for a TP station
When “TP” is not lit, if you press the [TA] button,
“TA” in the display lights and the unit
automatically receives a TP station.
Note:
• If a TP station is not received, the unit continues
the search operation. Pressing [TA] button again
goes off “TA” in the display and stops TP station
searching.
20
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.
Radio Data System Operations
Selecting PTY
1. Press and hold the [DISP] button for 1
second or longer to switch to the “Radio Data
System” adjustment selection display.
4. Press the [w] or [z] button to select the
desired PTY.
The 29 types of PTY below can be selected.
5. If you press and hold any one of the
[DIRECT] buttons for 2 seconds or longer,
the selected PTY is stored into that preset
channel memory.
2. Press the [x] or [v] button to select
“PTY-SEL”.
3. Press the [
] button.
PTY item
4. Press any one of the [DIRECT] buttons.
Alternatively, press the [w] or [z] button to
select the desired PTY.
ENGLISHe
NEWSa
ContentsA
News
5. Press the [DISP] button to return to the
AFFAIRSa
INFOa
Today’s events
Information
Sports
previous mode.
∗ Below are the factory default settings stored
for the [DIRECT] buttons.
SPORTa
PTY item
Preset
number
EDUCATEa
DRAMAa
Education
Drama
ENGLISHd ContentsA
1
2
3
4
5
6
NEWSb
INFO
News
CULTUREa
SCIENCEa
VARIEDa
POP Ma
Culture
Information
Pop Music
Sports
Science
POP M
SPORT
Variety
Pop music
Rock music
Easy music
Light music
Classics
CLASSICS Serious Classical Music
EASY M Easy Listening Music
ROCK Ma
EASY Ma
LIGHT Ma
CLASSICSa
OTHER Ma
WEATHERa
FINANCEa
CHILDRENa
SOCIALa
RELIGIONa
PHONE INa
TRAVELa
LEISUREa
JAZZa
∗ The PTY select mode is cancelled
automatically 7 seconds after a PTY is
selected.
Other music
Weather
Finance
PTY seek
1. Press and hold the [DISP] button for 1
second or longer to switch to the “Radio Data
System” adjustment selection display.
For children
Social
2. Press the [x] or [v] button to select
“PTY-SEL”.
Religion
Phone in
Travel
3. Press the [
] button.
4. Press the [v] button to search for a PTY
broadcast in the direction of higher
Leisure
frequencies; press the [x] button to search
in the direction of lower frequencies.
Jazz
COUNTRYa
NATION Ma
OLDIESa
Country
∗ If no station with the selected PTY broadcast
can be received, the unit returns to the PTY
select mode.
Nation music
Oldies
FOLK Ma
DOCUMENTa
Folk music
Documentaries
PTY preset memory
1. Press and hold the [DISP] button for 1
second or longer to switch to the “Radio Data
System” adjustment selection display.
2. Press the [x] or [v] button to select
“PTY-SEL”.
3. Press the [
] button.
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB
21
Radio Data System Operations
Emergency broadcast
If an emergency broadcast is received, all the
function mode operations are stopped.
“ALARM” appears in the display and the
emergency broadcast can be heard.
Volume setting of TA, emergency
broadcast (Alarm) and PTY
The volume for TA, Alarm and PTY interrupts
can be set during TA, Alarm or PTY interrupt.
∗ The factory default setting is “15”.
● Cancelling an emergency broadcast
If you press the [TA] button, emergency
broadcast reception is cancelled.
During a TA, Alarm or PTY interrupt, turn the
[ROTARY] knob to set the volume to the desired
level (0 to 33).
∗ When the TA, Alarm or PTY interrupt ends, the
volume returns to the level it had before the
interrupt.
Switching the PTY display language
You can select one of 4 languages (English,
German, Swedish or French) for the PTY
displayed in the display.
∗ The factory default setting is “ENGLISH”.
1. Press and hold the [DISP] button for 1
second or longer to switch to the adjustment
selection display.
2. Press the [x] or [v] button to select
“LANGUAGE”.
3. Press the [w] or [z] button to select the
desired language.
4. Press the [DISP] button to return to the
previous mode.
22
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.
CD/MP3/WMA/AAC Operations
What is AAC?
MP3/WMA/AAC
• AAC is an acronym for “Advanced Audio
Coding” and refers to the audio compression
method used with video compression
standards MPEG-2 and MPEG-4.
What is MP3?
MP3 is an audio compression method and
classified into audio layer 3 of MPEG standards.
This audio compression method has penetrated
into PC users and become a standard format.
• AAC files composed with the following
conditions can be played:
This MP3 features the original audio data
compression to about 10 percent of its initial
size with a high sound quality. This means that
about 10 music CDs can be recorded on a CD-R
disc or CD-RW disc to allow a long listening time
without having to change CDs.
- AAC files encoded with iTunes.
- iTunes Ver. 7.0 or earlier.
- File extension “.m4a” (“.M4A”)
• Tracks purchased at an iTunes Music store,
and copyright-protected files cannot be
played.
• When playing AAC files that include image
data, additional time may be required before
playback begins.
What is WMA?
WMA is the abbreviation of Windows Media
Audio, an audio file format developed by
Microsoft Corporation.
• Files may not play properly, depending on the
iTunes version under which an AAC file is
encoded.
Notes:
• If you play a file with DRM (Digital Rights
Management) for WMA remaining ON, no audio
is output (The WMA indicator blinks).
Precautions when creating MP3/
• Windows Media™, and the Windows ® logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States and/or
other countries.
WMA/AAC file
● Usable sampling rates and bit rates
1. MP3: Sampling rate 8 kHz-48 kHz,
Bit rate 8 kbps-320 kbps / VBR
2. WMA: Bit rate 8 kbps-320 kbps
3. AAC: Sampling rate 8 kHz-48 kHz,
Bit rate 8 kbps-320 kbps / VBR
● To disable DRM (Digital Rights
Management)
1. When using Windows Media Player 9/10/11,
click on TOOL ➜ OPTIONS ➜ MUSIC
RECORD tab, then under Recording
settings, unclick the Check box for RECORD
PROTECTED MUSIC. Then, reconstruct
files.
● File extensions
1. Always add a file extension “.MP3”, “.WMA”
or “.M4A” to MP3, WMA or AAC file by using
single byte letters. If you add a file extension
other than specified or forget to add the file
extension, the file cannot be played.
Personally constructed WMA files are used
at your own responsibility.
2. Files without MP3/WMA/AAC data will not
play. The indication “NO FILE” appears in
the play time display if you attempt to play
files without MP3/WMA/AAC data.
∗ When VBR files are played, the play time display
may differ the play location.
∗ When MP3/WMA/AAC files are played, a little no
sound part is caused between tunes.
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB
23
CD/MP3/WMA/AAC Operations
● Logical format (File system)
Set the type of file to be played
(multi-session function)
When a single disc holds both normal CD type
tracks and MP3/WMA/AAC type tracks, use this
command to select which type of track to play.
1. When writing MP3/WMA/AAC file on a CD-R
disc or CD-RW disc, please select “ISO9660
level 1, 2 or JOLIET or Romeo” or APPLE
ISO as the writing software format. Normal
play may not be possible if the disc is
recorded on another format.
∗ Default setting is “M-SESS CD”.
• When only one type of track (either music CD
or MP3/WMA/AAC) is recorded on a disc,
selecting either type will allow playback of the
disc.
2. The folder name and file name can be
displayed as the title during MP3/WMA/AAC
play but the title must be within 64 single
byte alphabetical letters and numerals
(including an extension).
• When playing CCCD (copy-control CDs), set
to CD type.
3. Do not affix a name to a file inside a folder
having the same name.
1. Press and hold the [BND] button for 1
second or longer.
● Folder structure
Each time the button is held pressed in this
way, “M-SESS” will be displayed for 1
second, then “CD” or “MP3” appears in the
display, the playback type alternates
1. A disc with a folder having more than 8
hierarchical levels will be impossible.
● Number of files or folders
1. Up to 255 files can be recognized per folder.
Up to 510 files can be played.
between CD type and MP3/WMA/AAC type.
• “M-SESS CD”
When playing music CD only.
2. Tracks are played in the order that they were
recorded onto a disc. (Tracks might not
always be played in the order displayed on
the PC.)
• “M-SESS MP3”
When playing music MP3/WMA/AAC only.
2. When setting is completed, remove the disc
and reinsert it.
3. Some noise may occur depending on the
type of encoder software used while
recording.
Backup Eject function
Just pressing the [Q] button, ejects the disc
even if the power to the unit was not turned on.
1. Press the [Q] button. Remove the disc after
it is ejected.
Notes:
• If you force a CD into before auto reloading, this
can damage the CD.
• If a CD (12 cm) is left in the ejected position for
15 seconds, the CD is automatically reloaded
(Auto reload).
24
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.
CD/MP3/WMA/AAC Operations
Listening to a disc already loaded in
the unit
Press the [SRC] button to select the CD/MP3/
WMA/AAC mode.
Displaying CD titles
This unit can display title data for CD-text/MP3/
WMA/AAC disc and user titles input with this
unit.
1. Each time you press the [DISP] button to
When the unit enters the CD/MP3/WMA/AAC
mode, play starts automatically.
change the title display.
● CD-TEXT disc
User ➜ Track ➜ Disc ➜ Artist ➜ User ...
If there is no disc loaded, the indication “NO
DISC” appears in the title display.
● MP3/WMA/AAC disc
Track ➜ Folder ➜ Title ➜ Album ➜ Artist ➜
Track ...
The mode changes each time the [SRC] button
is pressed. (Modes are not displayed for
equipment that is not connected.)
Notes:
Radio ➜ CD/MP3/WMA/AAC ➜ USB/MTP/
iPod ➜ (TEL) ➜ (CD changer) ➜ AUX ➜
Radio ...
• If the CD playing is not a CD-text CD or no user
title has been input, “NO TITLE” appears in the
display.
• If MP3/WMA/AAC disc is not input TAG, “NO
TITLE” appears in the display.
• For MP3, supports ID3 Tags V2.3 / 2.2 / 1.1 / 1.0.
• Tag displays give priority to V2.3 / 2.2.
• In the case of album Tags for WMA, the
information written into the extension header is
displayed.
Loading a CD
1. Insert a CD into the center of the CD SLOT
with the labeled side facing up. The CD plays
automatically after loading.
Notes:
• Never insert foreign objects into the CD SLOT.
• If the CD is not inserted easily, there may be
another CD in the mechanism or the unit may
require service.
• Only ASCII characters can be displayed in Tags.
Selecting a track
● Track-up
• Discs not bearing the
or
mark and
CD-ROMs cannot be played by this unit.
1. Press the [v] button to move ahead to the
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
beginning of the next track.
2. Each time you press the [v] button, the
track advances ahead to the beginning of the
next track.
Pausing play
1. Press the [
] button to pause play.
● Track-down
“PAUSE” appears in the display.
1. Press the [x] button to move back to the
2. To resume CD play, press the [
again.
] button
beginning of the current track.
2. Press the [x] button twice to move back to
the beginning of the previous track.
Fast-forward/fast-backward
● Fast-forward
1. Press and hold the [v] button for 1 second
or longer.
● Fast-backward
1. Press and hold the [x] button for 1 second
or longer.
∗ For MP3/WMA/AAC discs, it takes some time
until the start of searching and between tracks. In
addition, the playing time may have a margin of
error.
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB
25
CD/MP3/WMA/AAC Operations
Folder Select
This function allows you to select a folder
containing MP3/WMA/AAC files and start
playing from the first track in the folder.
● Folder repeat play
This function allows you to play a track currently
being played in the MP3/WMA/AAC folder
repeatedly.
1. Press and hold the [RPT] button for 1 second
1. Press the [z] or [w] button.
or longer to perform folder repeat play.
Press the [w] button to move the next folder.
Press the [z] button to move the previous
folder.
“ALL RPT” appears in the display for 2
seconds.
● Random play
This function allows you to play all tracks
recorded on a disc in a random order.
2. To select a track, press the [x] or [v]
button.
1. Press the [RDM] button to perform random
Top function
The top function resets the CD player to the first
track of the disc. Press the [BND] button to play
the first track (track No. 1) on the disc.
play.
“RANDOM” appears in the display for 2
seconds.
● Folder random play
∗ In case of MP3/WMA/AAC, the first track of a
folder being played will be returned.
This function allows you to play all the tracks of
all the folders recorded on an MP3/WMA/AAC
disc in a random order.
Other various play functions
● Scan play
This function allows you to locate and play the
first 10 seconds of all the tracks recorded on a
disc.
1. Press and hold the [RDM] button for 1
second or longer to perform folder random
play.
“ALL RDM” appears in the display for 2
seconds.
1. Press the [SCN] button to perform scan play.
● To cancel play
1. Press the operating button previously
selected.
∗ The various play mode is canceled and the
various play off mode appears in the display for 2
seconds.
“SCAN” appears in the display for 2
seconds.
∗ Scan play starts from the next track after the
track currently being played.
● Folder scan play
This function allows you to locate and play the
first 10 seconds of the first track of all the folders
on an MP3/WMA/AAC disc.
1. Press and hold the [SCN] button for 1
second or longer to perform folder scan play.
“ALL SCAN” appears in the display for 2
seconds.
∗ Folder scan play starts from the next folder
after the folder currently being played.
● Repeat play
This function allows you to play the current track
repeatedly.
1. Press the [RPT] button to perform repeat
play.
“REPEAT” appears in the display for 2
seconds.
26
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.
Operations Common to Each Mode
Each time you press the [w] or [z] button,
To change adjustment setting
the setting changes in the following order:
“MESSAGE” ↔ “ON” ↔ “OFF”
1. Press and hold the [DISP] button for 1
second or longer to switch to the
adjustment selection display.
● Entering message information
Message up to 30 characters long can be stored
in memory and displayed as a type of screen
saver setting.
2. Press the [x] or [v] button to select
the “item name”.
∗ The factory default setting is “WELCOME TO
CLARION”.
2-1. Select “MSG INP”.
“SETTINGS” ↔ “SCRN SVR” ↔ “MSG
INP” ↔ “SCROLL” ↔ “DIMMER” ↔ “A-
CANCEL” ↔ “TEL-SEL” ↔ “TEL-SP” ↔
“TEL-SW” ↔ “S-CHECK”
3-1. Press the [
] button.
3-2. Press and hold the [BND] button for 1
3. Press the [w] or [z] button to select the
“desired setting value”.
second or longer to clear the old message.
∗ In the case of display blinking “ENT”, you
3-3. Press the [x] or [v] button to move the
can press the [
setting value.
] button to adjust the
cursor.
3-4. Press the [BND] button to select a
character type. Each time you press the
[BND] button, the character type changes
in the following order:
∗ After completing settings, press the [DISP]
button to return to the previous mode.
● Displaying the settings
Capital letters ➜ Numbers ➜ Symbols ➜
Umlaut ➜ Capital letters…
The number of indicator of this unit decreases,
you can see the state of current settings at any
operation mode.
3-5. Press the [w] or [z] button to select the
desired character.
2-1. Select “SETTINGS”.
3-6. Repeat step 3-3 to 3-5 to enter up to 30
characters for message.
3-1. Press the [w] or [z] button to display the
state of current settings.
3-7. Press and hold the [
] button for 2
∗ When the setting is selected, after 1 second
the current state will be displayed.
seconds or longer to store the message in
memory.
∗ Press and hold the [BND] button for 1
second or longer to cancel the input
For example:
after 1 second,
message. Then press and hold the [
]
button for 2 seconds or longer to store the
message and the message return to default
setting.
or
● Setting the method for title scroll
Set how to scroll in CD-TEXT, MP3/WMA/AAC
title.
∗ The factory default setting is “ON”.
2-1. Select “SCROLL”.
● Turning the screen saver function on
or off
This unit is provided with the screen saver
function which allows you to show various kinds
of patterns and characters in the operation
status indication area of the display in a random
order. You can turn on or off this function. If the
button operation is performed with the screen
saver function on, the operation display
corresponding to the button operation is shown
for about 30 seconds and the display returns to
the screen saver display.
3-1. Press the [w] or [z] button to select “ON”
or “OFF”.
• ON:
To scroll automatically.
• OFF:
To scroll just 1 time.
∗ When you want to see the title again, in the
title mode, press and hold the [DISP] button
for 3 seconds or longer to scroll the title.
∗ The factory default setting is “ON”.
2-1. Select “SCRN SVR”.
3-1. Press the [w] or [z] button to select the
setting.
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB
27
Operations Common to Each Mode
● Setting the dimmer control
You can set the dimmer control “ON” or “OFF”.
∗ The factory default setting is “ON”.
2-1. Select “DIMMER”.
● Setting the car speaker output for the
cellular phone
∗ The factory default setting is “RIGHT”.
∗ To output the telephone calls, set the cellular
phone interrupt to “ON”.
3-1. Press the [w] or [z] button to select “ON”
or “OFF”.
2-1. Select “TEL-SP”.
3-1. Press the [w] or [z] button to select
“RIGHT” or “LEFT”.
● Setting the external amplifier
∗ The factory default setting is “OFF”.
2-1. Select “A-CANCEL”.
• RIGHT:
Telephone calls can be heard on the front
right speaker connected to this unit.
3-1. Press the [w] or [z] button to select “ON”
or “OFF”.
• LEFT:
• ON:
Telephone calls can be heard on the front
left speaker connected to this unit.
Use with connected AMP.
• OFF:
Use with inside AMP.
● Cellular phone interrupt setting
If you connect this unit and your cellular phone
with a separately sold cable, you can listen to
your telephone calls on your car speakers.
● Set the cellular phone connection
mode (AUX/CeNET)
You can listen to your telephone calls from the
speakers connected to this unit.
∗ The factory default setting is “OFF”.
2-1. Select “TEL-SW”.
∗ The factory default setting is “AUX”.
2-1. Select “TEL-SEL”.
3-1. Press the [w] or [z] button to select the
setting. Each time you press the [w] or
[z] button, the setting changes in the
following order:
3-1. Press the [w] or [z] button to select
“AUX” or “CENET”.
• AUX:
“OFF” ↔ “ON” ↔ “MUTE”
AUX input jack in front panel is for cellular
phone audio input, when the AUX input
jack is used to connect an AUX
BLUETOOTH BB (BLT373) (sold
separately).
• OFF:
This unit continues normal operation even
when the cellular phone is used.
• ON:
You can listen to your telephone calls from
the speakers connected to this unit.
• CeNET:
CeNET input cable is for cellular phone
audio input, when a CeNET cable is used
to connect a cellular phone (BLT583) (sold
separately). See “Bluetooth BB
Operations” (page 34-36) for details.
∗ When listening to your calls on your car
speakers, you can adjust the volume by
turning the [ROTARY] knob.
• MUTE:
The sound from this unit is muted during
telephone calls.
Note:
• If connecting a hands-free kit, please ensure the
setting is ON to receive the telephone audio
through the system.
28
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.
Operations Common to Each Mode
● Performing a system check
This function allows you to perform a system
check from the adjust mode when required.
Clearing titles
1. Select and play a CD in the CD changer for
which you want to clear the title.
2-1. Select “S-CHECK”.
2. Press and hold the [DISP] button for 1
3-1. Press and hold the [
second or longer.
] button for 1
second or longer.
3. Press the [x] or [v] button to select
“TITLE IN”.
“S-CHECK” appears in the display, then
the unit returns to the previous operation
mode.
4. Press the [
] button.
The display switches to the title input display.
5. Press and hold the [BND] button for 1
Entering titles
second or longer.
Titles up to 8 characters long can be stored in
memory and displayed for CD and CD changer.
The number of titles that can be entered for
each mode are as follows.
All characters in the title disappear.
6. Press and hold the [
] button for 2 seconds
or longer to store the setting.
Mode
Number of titles
AUX function
CD mode
50 titles
This system has an external input jack on the
front panel so you can listen to sounds and
music from external devices connected to this
unit.
CD changer mode
Number of titles
DCZ628 connected
100 titles
● Selecting AUX IN sensitivity
Make the following settings to select the
sensitivity when sounds from external devices
connected to this unit are difficult to hear even
after adjusting the volume.
1. Press the [SRC] button to select the mode
you want to enter a title (CD or CD changer).
2. Select and play a CD in the CD changer for
which you want to enter the title.
3. Press and hold the [DISP] button for 1
∗ The factory default setting is “MID”.
1. Press and hold the [DISP] button for 1
second or longer.
4. Press the [x] or [v] button to select
“TITLE IN”.
second or longer.
2. Select “AUX SENS”.
5. Press the [
] button.
3. Press the [w] or [z] button to select
“HIGH”, “MID” or “LOW”.
Note:
• When AUX mode is selected, AUX IN sensitivity
can be set.
The display switches to the title input display.
6. Press the [x] or [v] button to move the
cursor.
7. Press the [BND] button to select a character
type. Each time you press the [BND] button,
the character type changes in the following
order:
Capital letters ➜ Numbers ➜ Symbols ➜
Umlaut ➜ Capital letters…
8. Press the [w] or [z] button to select the
desired character.
9. Repeat steps 6 to 8 to enter up to 8
characters for the title.
10.Press and hold the [
] button for 2 seconds
or longer to store the title into memory.
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB
29
7. ACCESSORIES
USB/MTP Operations
• USB memory devices with security functions
cannot be played.
USB memory/MTP device operation
Note:
• The order in which tracks are recorded may
differ depending on the USB memory device
connected (the actual playback order may not
be the same as that indicated on your
computer’s display).
• The following operations are the same as for CD
mode:
∗Pause
∗Track selection
∗Fast-forward/fast-backward (Except DRM file)
∗Top function
• If you continuously operate folder up/down,
the play time keeps as “00:00”, and the sound
is not emitted.
∗Scan play
∗Repeat play
∗Random play
∗Folder selection
About USB Digital Media Streaming
This unit supports USB Digital Media Streaming.
USB Digital Media Streaming is a function used
to play music files transmitted using Media
Transfer Protocol (MTP). This function also
supports the playback of WMDRM 10 files.
See “CD/MP3/WMA/AAC Operations” (page 23-
26) for details.
About USB memory
• USB is an acronym for Universal Serial Bus,
and refers to an external bus standard
During USB Digital Media Streaming, the unit
displays the “MTP” mode indicator.
supporting data transfer rates of 12 Mbps.
Use of USB Digital Media Streaming requires
the purchase of a supported portable audio
player. For information regarding supported
portable audio players, consult your nearest
Clarion dealer, or visit Clarion's website.
• This unit is compatible with USB 1.1/2.0 with
maximum data transfer rates of 12 Mbps.
• USB memory devices that can be played by
connecting to the unit’s USB cable are limited
to those recognized as “USB mass storage
class devices”; operation is not guaranteed
with all USB memory devices.
CAUTION
∗ Devices compatible with “USB Mass Storage
Class” can be used merely by connecting to
the host device, without need for special
drivers or application software.
• Insert and remove a USB memory/MTP
device only when the device is not being
accessed. Connecting or disconnecting
the device at the following times may
result in the loss of data:
• Consult the manufacturer of your USB
memory device for information regarding
whether it is supported by “USB Mass
Storage Class” standards.
- If the USB memory/MTP device is
removed or power is disconnected
during writing to the device.
- When the device is subjected to static
electricity or electric noise.
• Audio files playable on this unit are limited to
MP3/WMA/AAC files. For details, see the
section “MP3/WMA/AAC” (page 23).
• Do not leave a USB memory/MTP device
unattended in an automobile. Exposure to
direct sunlight or high temperatures may
cause deformation or other malfunction of
the USB memory/MTP device.
• To prevent the accidental loss of data, always
back up important data on your computer.
• This unit does not support connections to a
computer. In addition, connections made
through a USB hub device are also not
supported.
• When a USB memory device is composed of
two or more drives, only one of the drives will
be detected.
30
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.
USB/MTP Operations
Connecting a USB memory/MTP
device
1. Connect the USB memory/MTP device to the
USB slot.
To listen to tracks on a connected
USB memory/MTP device
1. Press the [SRC] button to switch the source.
When USB memory/MTP device is selected,
playback (except DRM files) will begin from
the location at which playback was
previously stopped.
Playback will begin from the first file
recorded on the device.
CAUTION
Do not turn on vehicle ignition when the MTP
device is connected, since it may result in
loss or damage to data on the MTP device.
Connect the MTP device to the USB slot after
vehicle ignition is turned on.
∗ When a USB memory/MTP device is
connected the USB/MTP mode will be
displayed.
∗ When a USB memory/MTP device is
disconnected and then reconnected, playback
will begin from the beginning of the USB
memory/MTP device.
∗ When “MTP” mode is selected, AAC files on
the MTP device cannot be played.
To stop play
1. Press the [SRC] button and switch the
function to a source other than the USB
memory/MTP.
CAUTION
Do not remove the USB memory/MTP device
when the USB/MTP mode is selected, since it
may result in loss or damage to data on the
USB memory/MTP device.
Confirm the proper
orientation of the
connector before
inserting.
Always backup and save important data on
your computer.
∗ If the device is not recognized, press the
[SRC] button to switch the source to the
device.
∗ Always insert the device fully into the
connector. Incomplete connections may
cause the device not to be recognized.
2. Remove the USB memory/MTP device from
the USB slot.
∗ Depending on the number of tracks recorded,
some amount of time may be required until all
tracks are read into the unit.
∗ The order in which tracks are recorded may
differ depending on the device connected (the
actual playback order may not be the same as
that indicated on your computer’s display).
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB
31
iPod Operations
Note:
This section describes operations when
connected to an Apple iPod via the USB slot.
• The following operations in Play mode operate
the same as in CD mode:
Notes:
∗Track selection: [x], [v]
• See the iPod Owner’s Manual for details
regarding operation conditions.
• The unit will not operate, or may operate
improperly with unsupported versions.
∗Fast-forward/fast-backward: [x], [v]
∗Pause: [
]
∗Top function: [BND]
• For a list of compatible Apple iPod unit with the
this model, please contact your Clarion dealer or
See “CD/MP3/WMA/AAC Operations” (page 23-
26) for details.
Other various play functions
(in Play mode)
Notes:
• These functions are not supported when in the
iPod menu mode.
• The Random function set on the iPod remains the
same after attachment/detachment of the iPod.
• The Repeat function on the iPod will be changed
when you connect/disconnect the iPod to the
unit.
Connecting an iPod
When an iPod is connected to the USB slot,
“Shuffle” set on the iPod will become as follows:
• “Shuffle (Albums)” play ➜ Random play
• “Shuffle (Songs)” play ➜ All random play
The iPod has two modes, the “Play mode” and
the “iPod menu mode” for selecting tracks.
Switch between these modes by pressing the
[BND] button for 1 second or longer.
● Repeat play
Note:
Play back one track repeatedly.
• To connect iPod, please use the USB cable
attached in iPod.
1. Press the [RPT] button.
● Random play
Select iPod mode
1. Press the [SRC] button.
Play all albums within a selected category, in
random order. (Corresponds to “Shuffle
(Albums)” command on iPod.)
Playback will begin from the last file that was
played on the iPod.
1. Press the [RDM] button.
● All random play
Play all tracks within a selected category, in
random order. (Corresponds to “Shuffle
(Songs)” command on iPod.)
1. Press and hold the [RDM] button for 1
second or longer.
● To cancel play
1. Press the same play button once again.
iPod cable
Notes:
Confirm the proper
orientation of the iPod
connector before
inserting.
• When the repeat play mode is canceled, after
play all tracks within a selected category,
playback will begin from the first track in the
selected category.
• When playing the last track within a selected
category in Random mode, if ACC is switched off
then on again, playback will begin from a
different track.
• Though the default setting of an iPod is “All
Repeat”, the indication on the mode status is not
displayed.
32
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.
iPod Operations
Selecting category from the iPod
menu
1. Press and hold the [BND] button for 1
second or longer to select the iPod menu
mode.
Selecting category using preset
memory
1. Press and hold the [BND] button for 1
second or longer to select the iPod menu
mode.
The iPod menu categories will be displayed.
The category can be set as follows in the
[DIRECT] (1-6) buttons.
Notes:
[1] : PLAYLIST
[2] : ARTIST
[3] : ALBUM
[4] : SONG
• Repeat and Random mode operations are not
supported when in the iPod menu mode.
• In iPod menu mode, if you press the [x]/[v]
or [w]/[z] button fast, playback may not be
performed.
[5] : GENRE
[6] : COMPOSER
2. Press the [w] or [z] button to switch
between categories.
The iPod menu categories alternate in the
following order:
2. Press the desired [DIRECT] (1-6) button to
select the category.
“PLAYLIST” ↔ “ARTIST” ↔ “ALBUM” ↔
“SONG” ↔ “GENRE” ↔ “COMPOSER”...
∗ Subfolders may be displayed, depending on
the category.
In this case, use the [w] and [z] buttons to
switch between subfolders, then use the [v]
button to select the desired subfolder.
Note:
The iPod menu mode can be canceled by
performing one of the following operations:
• Press the [BND] button.
3. When the track name display is showing,
press the [v] button.
• When the category select screen is displayed,
Playback will begin from the first track in the
selected category, and the iPod menu mode
will be canceled.
press the [v] button.
3. Press the [v] button to select the category.
4. When the track name display is showing,
∗ Use the [w] and [z] buttons to select a track
press the [v] button.
Playback will begin from the first track in the
selected category, and the iPod menu mode
will be canceled.
within a category.
About title display
This unit supports the display of title information
transmitted from a connected iPod.
∗ Subfolders may be displayed, depending on
the category.
• Character code information is UTF-8;
displayable characters include English
alphanumerics, some symbols, and some
umlaut characters.
In this case, use the [w] and [z] buttons to
switch between subfolders, then use the [v]
button to select the desired subfolder.
∗ When the track name display is showing,
pressing the [x] button will return to the
currently playing folder name display.
• Unsupported characters will be replaced by
asterisks (*).
5. Use the [w] and [z] buttons to select a
track within a category.
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB
33
Bluetooth BB Operations
The CeNET Bluetooth interface adapter
(BLT583) allows you to utilize your car’s built-in
audio system for wireless mobile phone
handsfree communication.
● Call from Phonebook
User can search the contact name in the
phonebook and make call.
Alternatively, user can call from mobile phone.
The car stereo with BLT583 installed will be able
to retrieve phonebook contacts, received call,
dialed call, missed call, incoming and outgoing
calls.
1. Press the [BND] button to select “PHONE
BOOK”.
2. Press the [v] button to enter the contact
name mode (In this case, use the [w], [z]
button to select the desired contact name).
For details, consult the owner’s Manual
provided with your CeNET Bluetooth interface
adapter.(Hereinafter, CeNET Bluetooth
interface adapter is abbreviated as Bluetooth
BB.)
3. When the contact name is displayed, press
the [v] or [x] button to select the contact
name’s phone number.
4. Press the [
phone No.
] button to call the mobile
Basic Operations
∗ Press the [SOUND] button to end the call.
● Answering a call
1. You can answer an incoming call by pressing
any button.
Select Bluetooth BB
1. Press the [SRC] button to switch the source.
∗ Press the [SOUND] button to reject an
incoming call.
Making a call
There are 2 ways to make outgoing call.
● Received/Dialled/Missed Call History
You can search any Received/Dialled/Missed
Call History.
● Direct Number Call
Outgoing call can be made by entering
telephone numbers directly via the car stereo.
1. Press the [BND] button to select “RECEIVED
CALL”, “DIALLED CALL” or “MISSED
CALL”.
Telephone number uses 0, 1, 2, 3, 4, 5, 6, 7, 8,
9, *, #, and +.
2. Press the [v] button to enter the contact
name mode (In this case, use the [w], [z]
button to select the desired contact name).
1. Press the [BND] button to select “DIAL
NUMBE”.
2. Press the [
] button.
3. When the contact name is displayed, press
the [x] or [v] button to select the contact
name’s phone number.
3. Press the [x] or [v] button to move the
cursor.
4. Press the [w] or [z] button to select the
4. Press the [
phone No.
] button to call the mobile
numbers.
5. Press and hold the [
] button for 1 second
or longer to call the mobile phone No.
∗ Press the [SOUND] button to end the call.
34
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.
Bluetooth BB Operations
● PAIR SPECIAL
To change Bluetooth adjustment
setting
This is used for pairing special Bluetooth device
which cannot carry out pairing in usual pairing
mode.
1. Press and hold the [DISP] button for 1
second or longer to switch to the Bluetooth
adjustment selection display.
Please use this pairing mode if your Bluetooth
device is listed in the menu.
2-1. Select “PAIR SPECIAL”.
2. Press the [x] or [v] button to select
the “item name”.
3-1. Press the [
] button, the special
Bluetooth device is listed in the display.
“PAIRING” ↔ “PAIR SPECIAL” ↔
“SELECT” ↔ “DELETE” ↔ “MIC GAIN” ↔
“RING VOL” ↔ “AUTO ANS” ↔
“REFUSE” ↔ “A-CONECT” ↔ “PIN
CODE” ↔ “ADDRESS” ↔ “VERSION” ↔
“PAIRING”…
4-1. Press the [w] or [z] button to select the
desired special Bluetooth device.
5-1. Press and hold the [
second or longer.
] button for 1
6-1. Press the [w] or [z] button to select
“SEARCH” or “WAIT”.
3. Press the [w] or [z] button to select the
“desired setting value”.
∗ The next operation are the same as for
“PAIRING” mode.
∗ In the case of display blinking “ENT”, you
can press the [
setting value.
] button to adjust the
● SELECT
This is a setting for user to select one of the
paired mobile phones.
∗ After completing settings, press the [DISP]
button to return to the previous mode.
2-1. Select “SELECT”.
3-1. Press the [
] button, then the paired
● PAIRING
This option is used to perform Bluetooth pairing
with the mobile phone.
mobile phones appears in the display.
4-1. Press the [w] or [z] button to choose one
of the 5 devices.
Up to a maximum of 5 devices can be paired.
5-1. Press and hold the [
] button for 1
2-1. Select “PAIRING”.
second or longer to connect.
3-1. Press the [
] button.
Connected device will be able to use all the
functionalities provided.
4-1. Press the [w] or [z] button to select
“SEARCH” or “WAIT”.
● DELETE
This is a setting for user to delete one of the
paired device from the list.
5-1. Press and hold the [
second or longer.
] button for 1
“SEARCH” mode: User can search the
Bluetooth mobile phone.
2-1. Select “DELETE”.
3-1. Press the [
] button, then the paired
“WAIT” mode: Alternatively User can
search the Bluetooth BB (BLT583) via the
mobile phone.
mobile phones appears in the display.
4-1. Press the [w] or [z] button to choose one
of the 5 devices.
6-1. When you select “SEARCH” mode.
5-1. Press and hold the [
] button for 1
Press the [w] or [z] button to select the
second or longer to delete the paired
device.
Note:
• Deleted paired device will not automatically
rearrange in the paired device list.
desired Bluetooth mobile phone.
7-1. Press and hold the [
] button for 1
second or longer to pair.
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB
35
Bluetooth BB Operations
● MIC GAIN
● PIN CODE
MIC gain can be set by each paired mobile
phone device. Each registered device has
unique MIC gain setting.
This PIN code is used during pairing mode. A
maximum of 10 digits can be changed through
the car stereo.
∗ The factory default PIN code is “1234”.
2-1. Select “PIN CODE”.
2-1. Select “MIC GAIN”.
3-1. Press the [w] or [z] button to change the
MIC gain setting.
3-1. Press the [
] button.
● RING VOL
This option is used to change the ringing
volume.
4-1. Press and hold the [BND] button to clear
the old PIN code.
5-1. Press the [x] or [v] button to remove
the cursor.
2-1. Select “RING VOL”.
6-1. Press the [w] or [z] button to select the
3-1. Press the [w] or [z] button to change the
desired digits.
ringing volume.
7-1. Press and hold the [
] button for 2
● AUTO ANS
seconds or longer to store in memory.
This is a setting to determine whether any
incoming call will be automatically or manually
answered.
∗ The factory default setting is “ON”.
2-1. Select “AUTO ANS”.
● ADDRESS
This will hold the unique Bluetooth BB address.
The address is 12 figures.
2-1. Select “ADDRESS”.
3-1. Press the [w] or [z] button to select “ON”
or “OFF”.
The Bluetooth BB address 6 figures
appears in the display.
ON: Any incoming call is automatically
answered in 4 seconds.
3-1. Press the [w] or [z] button to display.
● VERSION
This will display the software version of the
Bluetooth BB.
OFF: User needs to manually answer the
call.
● REFUSE
2-1. Select “VERSION”.
This function allows all incoming calls to be
refused.
The Bluetooth BB version appears in the
display.
∗ The factory default setting is “OFF”.
2-1. Select “REFUSE”.
3-1. Press the [w] or [z] button to select “ON”
or “OFF”.
ON: All incoming calls are automatically
refused.
OFF: Incoming call notification enabled.
● A-CONECT
This function allows the Bluetooth BB to be
connected automatically with previously
connected device. Connection can be
established at any source mode.
∗ The factory default setting is “ON”.
2-1. Select “A-CONECT”.
3-1. Press the [w] or [z] button to select “ON”
or “OFF”.
ON: Automatic connection is enabled.
OFF: Automatic connection is disabled.
36
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.
CD Changer Operations
Note:
Displaying CD titles
This unit can display title data for CD-text CDs
and user titles input with this unit.
∗ Title data for CD-text CDs can be displayed with
this unit only when it is connected to DCZ628.
• The following operations are the same as for CD
mode:
∗Pause
∗Track selection
∗Fast-forward/fast-backward
∗Scan play
∗Repeat play
∗Random play
See “CD/MP3/WMA/AAC Operations” (page 23-
26) for details.
1. Press the [DISP] button to change the title
display.
Notes:
• If the CD playing is not a CD-text CD or no user
title has been input, “NO TITLE” appears in the
display.
• If a CD-text CD is not input its disc title or a track
title, “NO TITLE” appears in the display.
CD changer functions
When an optional CD changer is connected
through the CeNET cable, this unit controls all
CD changer functions. This unit can control a
total of 2 changers.
Procedure to scroll a title
Set “SCROLL” to “ON” or “OFF”.
(The factory default setting is “ON”. Refer to the
subsection “Setting the method for title scroll”
in section “Operations Common to Each
Mode”.)
Press the [SRC] button and select the CD
changer mode to start play. If 2 CD changers
are connected, press the [SRC] button to select
the CD changer for play.
● When set to “ON”
∗ If “NO MAG” appears in the display, insert the
magazine into the CD changer. “D-CHECK”
appears in the display while the player loads
(checks) the magazine.
The title is automatically kept scrolling.
● When set to “OFF”
To scroll just 1 time.
When you want to see the title again, in the title
mode, press and hold the [DISP] button for 3
seconds or longer to scroll the title.
∗ If “NO DISC” appears in the display, eject the
magazine and insert discs into each slot. Then,
reinsert the magazine back into the CD changer.
Note:
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
Selecting a CD
1. Press the [w] or [z] button to select the
desired disc.
CAUTION
CD-ROM discs cannot be played from every
CD changer, it’s depended on the model.
∗ If a CD is not loaded in a slot of magazine,
pressing the [w] or [z] button can not work.
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB
37
CD Changer Operations
● Disc random play
Other various play functions
The disc random play selects and plays
individual tracks or discs automatically in no
particular order. This function continues
automatically until it is cancelled.
● Disc scan play
Disc scan play locates and plays the first 10
seconds of the first track on each disc in the
currently selected CD changer. This function
continues automatically until it is cancelled.
∗ Disc scan play is useful when you want to select a
desired CD.
1. Press and hold the [RDM] button for 1
second or longer. “ALL RDM” appears in the
display and disc random play starts.
● To cancel play
1. Press the operating button previously
selected.
1. Press and hold the [SCN] button for 1
second or longer. “ALL SCAN” appears in
the display and disc scan play starts.
● Disc repeat play
After all the tracks on the current disc have been
played, disc repeat play automatically replays
the current disc over from the first track. This
function continues automatically until it is
cancelled.
1. Press and hold the [RPT] button for 1 second
or longer. “ALL RPT” appears in the display
and disc repeat play starts.
38
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.
8. TROUBLESHOOTING
Problem
Cause
Measure
Power does not
turn on.
Fuse is blown.
Replace with a fuse of the same amperage. If the fuse
blows again, consult your store of purchase.
(No sound is
produced.)
Incorrect wiring.
Consult your store of purchase.
No sound output Power antenna lead is
1. Turn the unit off.
when operating
the unit with
amplifiers or
power antenna
attached.
shorted to ground or
2. Remove all wires attached to the power antenna
lead. Check each wire for a possible short to
ground using an ohm meter.
excessive current is required
for remote-on the amplifiers
or power antenna.
3. Turn the unit back on.
4. Reconnect each amplifier remote wire to the power
antenna lead one by one. If the amplifiers turn off
before all wires are attached, use an external relay
to provide remote-on voltage (excessive current
required).
Nothing happens The microprocessor has
Turn off the power, then press the
Reset button
when buttons are malfunctioned due to noise, [RELEASE] button and remove
pressed.
etc.
the DCP.
Press the reset button for about 2
seconds with a thin rod.
Display is not
accurate.
DCP or main unit connectors Wipe the dirt off with a soft cloth moistened with
are dirty. cleaning alcohol.
No sound heard
No sound heard
The speaker protection circuit 1. Turn down sound volume. Function can also be
is operating.
restored by turning the power off and on again.
(Speaker volume is reduced automatically when
the speaker protection circuit operates).
2. If the sound is muted again, consult our service
department.
MP3/WMA/AAC files are
absent in a disc.
Write MP3/WMA/AAC files onto the disc properly.
Files are not recognized as
an MP3/WMA/AAC file.
Use MP3/WMA/AAC files encoded properly.
File system is not correct.
Use ISO9660 level 1, 2 or JOLIET or Romeo or
APPLE ISO file system.
Sound skips or is Compact disc is dirty.
Clean the compact disc with a soft cloth.
noisy.
Compact disc is heavily
Replace with a compact disc with no scratches.
scratched or warped.
Sound is cut or
skipped.
MP3/WMA/AAC files are not Use MP3/WMA/AAC files encoded properly.
encoded properly.
Noise is
generated or
noise is mixed
with sound.
Sound is bad
directly after
power is turned
on.
Water droplets may form on Let dry for about 1 hour with the power on.
the internal lens when the car
is parked in a humid place.
Wrong filename
File system is not correct.
Use ISO9660 level 1, 2 or JOLIET or Romeo or
APPLE ISO file system.
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB
39
Problem
Cause
Measure
No sound heard
The device contains no MP3/ Record MP3/WMA/AAC files properly to the device.
WMA/AAC files.
The files are not proper MP3/ Use only properly encoded MP3/WMA/AAC files.
WMA/AAC format.
Connectors are loose.
Disconnect the device and reconnect securely.
Sound is
The MP3/WMA/AAC files are Use only properly encoded MP3/WMA/AAC files.
interrupted or has improperly encoded.
noise.
The device isn’t
recognized.
The device is damaged.
Connectors are loose.
Disconnect the device and reconnect. If the device is
still not recognized, try replacing with a different
device.
According to the state of
operation on the device, the
communication fault is
caused.
Disconnect the device and reconnect.
Can’t insert the
device.
The device has been inserted Try reversing the connection direction of the device
improperly.
(usually the brand name surface should be facing
left).
The connector is broken.
Replace with a new device.
40
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.
9. ERROR DISPLAYS
If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
Error Display
ERROR 2
Cause
A CD is caught inside the CD This is a failure of CD deck’s mechanism and consult
deck and is not ejected. your store of purchase.
Measure
ERROR 3
ERROR 6
A CD cannot be played due Replace with a non-scratched, non-warped-disc.
to scratches, etc.
A CD is loaded upside-down Eject the disc then reload it properly.
inside the CD deck and does
not play.
ERROR 2
ERROR 3
A CD inside the CD changer This is a failure of CD changer’s mechanism and
is not loaded.
consult your store of purchase.
A CD inside the CD changer Replace with a non-scratched, non-warped disc.
cannot be played due to
scratches, etc.
ERROR 6
A CD inside the CD changer Eject the disc then reload it properly.
cannot be played because it
is loaded upside-down.
ERROR 2
ERROR 3
The files are not proper MP3/ Use only properly encoded MP3/WMA/AAC files.
WMA/AAC format.
The MP3/WMA/AAC files are Use only properly encoded MP3/WMA/AAC files.
(USB/MTP mode) improperly encoded.
ERROR 3
(iPod mode)
The iPod contains no audio Insert an iPod containing audio files.
files.
CUR ERR
Overcurrent detection.
Disconnect the devices and reconnect. If the devices
are still not recognized, try replacing with a different
devices.
HUB ERR
Do not support the HUB
devices.
Do not use the HUB devices.
If an error display other than the ones described above appears, press the reset button. If the problem
persists, turn off the power and consult your store of purchase.
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB
41
10.SPECIFICATIONS
Radio section
Tuning System: PLL synthesizer tuner
General
Output Power: 19 W
✕
4 (DIN 45324, +B=14.4V)
Receiving Frequencies:
Power Supply Voltage:
FM : 87.5 to 108 MHz (0.05 MHz steps)
MW : 531 to 1602 kHz (9 kHz steps)
LW : 153 to 279 kHz (3 kHz steps)
14.4 V DC (10.8 to 15.6 V allowable),
negative ground
Power Consumption: Less than 15 A
Speaker Impedance: 4 Ω (4 to 8 Ω allowable)
Weight:
CD player section
System: Compact disc digital audio system
Frequency Response: 20 Hz to 20 kHz ( 1 dB)
Signal to Noise Ratio: 100 dB (1 kHz)
Dynamic Range: 80 dB (1 kHz)
Distortion: 0.03%
Main unit: 1.16 kg
Remote control unit: 40 g (including battery)
Dimensions:
Main unit:
178 (W) ✕ 50 (H) ✕ 155 (D) mm
Remote control unit:
44 (W) ✕ 113 (H) ✕ 11 (D) mm
Note:
• Specifications and design are subject to change without notice for further improvement.
11.OTHERS
WMDRM 10 for devices
• This product is protected by certain
intellectual property rights of Microsoft. Use
or distribution of such technology outside of
this product is prohibited without a license
from Microsoft.
• Content owners use Windows Media digital
rights management technology (WMDRM) to
protect their intellectual property, including
copyrights. This device uses WMDRM
software to access WMDRM-protected
content. If the WMDRM software fails to
protect the content, content owners may ask
Microsoft to revoke the software’s ability to
use WMDRM to play or copy protected
content. Revocation does not affect
unprotected content. When you download
licenses for protected content, you agree that
Microsoft may include a revocation list with
the licenses. Content owners may require you
to upgrade WMDRM to access their content.
If you decline an upgrade, you will not be able
to access content that requires the upgrade.
42
DXZ388RUDSBo/wDnXlZo3a8d9RfrUoSmB/WDXwZ3w8.9SRoGmUSaBnuals.com. All Manuals Search And Download.
ꢀ
TEL :+49-6105-977-0
FAX :+49-6105-977-399
CE DECLARATION o f CONFORMITY
ꢀ
We Clarion Europa GmbH
ꢀ
ꢀ
ꢀ
(supplier's name)
Hessenring 19-21, 64546 Mörfelden-Walldorf, GERMANY
(address)
declare under our sole responsibility that the product
CAR RADIO with CD PLAYER
MODEL: DXZ388RUSB,DXZ389RUSB,DXZ389ꢀRꢀGUꢀSꢀB ꢀ ꢀ
Product code:PE3046 (differ: illuminatioꢀn)ꢀ ꢀ
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
TYPE: 1043213
(name, type or model, possibly sources and numbers of items)
to which this declaration relates is in conformity with the following
standard(s) or other normative document(s)
EN 55013:2001 + A1, EN 55020:2002 + A1
(title and/or number and date of issue of the standard(s) or
other normative document(s))
ꢀ
(if applicable) following the provisions of 2004/108/EC Directive.
ꢀꢀꢀAnd following the provisions of 2004/104/EC
according to paragraph 3.2.9 of Annex I,
meets the limits defined in paragraph 6.5, 6.6, 6.8 and 6.9 of Annex I
Directive,
ꢀ
(supplier's comment)
ꢀ
Mörfelden-Walldorf GERMANY
30 OCT 2007ꢀ
(Place and date of issue)
ꢀ
Susumu Yamakawa
President
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
(name and signature or equivalent
marking of authorized person)
RefNo 07RCOC001C3 D.F.DQC07A157
Clarion Co., Ltd.
Printed in China / Imprimé en Chine / Gedruckt in China / Stampato in Cina
Gedrukt in China / Impreso en China / Tryckt i Kina / Impresso na China
All Rights Reserved. Copyright © 2007: Clarion Co., Ltd.
PE-3046E
280-8583-00
2007/12
|