QuickSpecs
SANworks Network View V2.0A by Compaq
PRODUCT DESCRIPTION/OVERVIEW
SANworksTM Network View by Compaq is a SAN management application providing a consolidation point for storage network visualization, monitoring
and configuration. SAN devices, their Fibre Channel interconnects, and associated status are automatically discovered and represented in an intuitive
topographical display. SAN device management is made easy by double clicking on a device icon. System performance bottlenecks are identified for
proactive resolution and planning. A Java based design allows remote SAN management from any Web browser. SANworks Network View is easily
installed on the Management Appliance and because it is an appliance application; host operating system integration is not a necessity.
CUSTOMER BENEFITS
•
•
•
•
•
•
•
•
•
•
Consolidation and integration point for managing all storage networked devices
Reduced IT resource needs through consolidation
Remote access from any network or internet connected PC
At-a-glance visualization of storage fabric and associated status
Proactive SAN availability monitoring
Proactive SAN and storage array performance monitoring for system bottleneck resolution
Management and monitoring of numerous Compaq and third party devices
Operating system agnostic without the need for a server-client-agent setup
Easy installation and setup
Integration into network management tools through SANworks Open SAN Manager by Compaq and the SANworks Management Appliance by
Compaq
•
Scalable for future growth
SOFTWARE FEATURES/FUNCTIONALITY
•
•
•
•
•
•
•
•
•
Automated in-band and out-of-band device discovery
Graphical SAN topology mapping of all Fibre Channel connected devices and their interconnects
Graphical status display
Automated SAN availability monitoring and notification via e mail and text pager when faults arise
SNMP trap forwarding
Custom notification set up
Performance monitoring and graphical trending of numerous switch and StorageWorks™ array performance metrics
Launch capability for all browser enabled device management tools
Support for numerous Compaq and third party devices
HARDWARE SUPPORT
SANworks Network View supports the following hardware devices running the software, firmware, or driver versions listed in the software pre-requisite
section. Support is defined as capability for device discovery and monitoring.
•
•
•
•
SANworks Management Appliance by Compaq
StorageWorks Fibre Channel Storage Hub 12 by Compaq (with management option)
StorageWorks Modular Data Router by Compaq
Fibre Channel switches:
DA-10852
Canada — Version 7 — April 9, 2002
1
QuickSpecs
SANworks Network View V2.0A by Compaq
SOFTWARE PREREQUISITES
•
SANworks Management Appliance running Open SAN Manager (OSM) v1.0C
•
Fibre Channel switches:
−
−
−
−
−
−
−
−
−
−
If using StorageWorks 1Gb Fibre Channel SAN Switches, firmware version 2.1.9m or 2.6
If using StorageWorks 2Gb Fibre Channel SAN Switches, firmware version 3.02
If using Brocade SilkWorm Models 2400, 2800, 2050, 2250, or 6400, firmware versions 2.1.9m, 2.2.1, 2.4.1f, or 2.6
If using Brocade SilkWorm Model 3800, firmware version 3.02
If using StorageWorks Fibre Channel Arbitrated Loop Switch 8 (FC-AL), firmware version 1.00-G03
If using McData ED-5000 Director, firmware version 1.2.02 pass 6
If using StorageWorks Fibre Channel Storage Hubs, firmware version 4.00-g06.
If using StorageWorks Modular Data Routers, firmware version 1187.
If using StorageWorks RAID Storage Systems, ACS version 8.5, 8.6-1.
If using EMC Symmetrix, those that support Sym API 4.2 & 4.3
•
Browser Support: Client PC systems browsing to the SANworks Management Appliance require the following OS/browser versions:
Client Systems
Windows 2000
Windows 2000
Windows NT v4.0
Windows NT v4.0
Solaris
Browser
Browser Version
v5.01 & v5.5
v4.79
Internet Explorer
Netscape
Internet Explorer
Netscape
v5.5
v4.79
Netscape
v4.78
Tru64 UNIX
Netscape
v4.78
Host Agent Support: SANworks Network View requires host agent installation for Fibre Channel host bus adapter (HBA) discovery and monitoring purpose
only. The following table lists supported host operating systems and HBA firmware versions. Installable agents are provided with the SANworks Network View
CD.
Server/Host
Systems
OS Versions
Associated HBAs
HBA Part
Number
HBA Firmware
Versions
HBA Driver
Versions
Windows 2000
SP2
StorageWorks 2GB, 64-Bit/66MHz PCI-to-
Fibre Channel Host Adapter for Windows®
NT, Windows 2000 (MSA 1000 only)
245299-B21
3.82a1 with boot 5-4.54a7
BIOS 1.60a5
Windows 2000
Windows 2000
SP2
StorageWorks 64-Bit/33MHz PCI-to-Fibre
Channel Host Bus Adapter
176479-B21
3.81a1
5-4.52a9
SP2
SP2
StorageWorks 32-Bit/33Mhz PCI-to-Fibre
Channel Host Bus Adapter
380574-001
120186-B21
3.20x7
5-4.52a9
5.4.6.63
Windows 2000
(Compaq
StorageWorks 64-Bit/66Mhz PCI-to-Fibre
Channel Host Bus Adapter
No Firmware
ProLiant only)
Windows NT
Windows NT
v4.0 SP6a
StorageWorks 64-Bit/33MHz PCI-to-Fibre
Channel Host Bus Adapter
176479-B21
3.81a1
4-4.52a9
v4.0 SP6a
v4.0 SP6a
StorageWorks 32-Bit/33Mhz PCI-to-Fibre
Channel Host Bus Adapter
380574-001
120186-B21
3.20x7
4-4.52a9
4.19.0.63
Windows NT
(Compaq
StorageWorks 64-Bit/66Mhz PCI-to-Fibre
Channel Host Bus Adapter
No Firmware
ProLiant only)
Windows 2000
for Datacentre
v2.0
StorageWorks 64-Bit/33MHz PCI-to-Fibre
Channel Host Bus Adapter
176479-B21
3.81a1
5-4.52a9
DA-10852
Canada — Version 7 — April 9, 2002
3
QuickSpecs
SANworks Network View V2.0A by Compaq
SOFTWARE PREREQUISITES (continued)
Server/Host
Systems
OS Versions
Associated HBAs
HBA Part
Number
HBA Firmware
Versions
HBA Driver
Versions
Tru64 UNIX
Tru64 UNIX
Tru64 UNIX
v5.1 & v5.1A
StorageWorks 2GB, 64-Bit/66MHz PCI-to-
Fibre Channel Host Adapter for Tru64 and
OVMS (HSG80 only)
261329-B21
168794-B21
380574-001
3.81A4
3.81a4
3.20x7
1.32A
v4.0F, v4.0G,
v5.0a, v5.1, or
v5.1a
StorageWorks 64-Bit/33MHz PCI-to-Fibre
Channel Host Bus Adapter for Tru64
1.29
v4.0F, v4.0G,
v5.0a, v5.1, or
v5.1a
StorageWorks 32-Bit/33Mhz PCI-to-Fibre
Channel Host Bus Adapter
1.29
Solaris
v2.6, v7 or v8
(See Note 1)
StorageWorks 32-Bit PCI-to-Fibre Channel 380576-001
Host Bus Adapter for Solaris
3.03
2.5.9
Solaris
v2.6, v7 or v8
(See Note 1)
StorageWorks 64-Bit Sbus-to-Fibre
Channel Host Bus Adapter for Solaris
123503-001
261329-B21
13.3.7
3.81A4
2.5.9
OpenVMS
v7.3
StorageWorks 2GB, 64-Bit/66MHz PCI-to-
Fibre Channel Host Adapter for Tru64 and
OVMS (HSG80 only)
Embedded in OS
OpenVMS
OpenVMS
HP-UX
v7.3
StorageWorks 64-Bit/33MHz PCI-to-Fibre
Channel Host Bus Adapter
168794-B21
380574-001
216409-B21
197819-B21
120186-B21
3.81a4
3.20x7
1.4
Embedded in OS
Embedded in OS
2.5.8
v7.3
StorageWorks 33-Bit/33MHz PCI-to-Fibre
Channel Host Bus Adapter
v11.0
StorageWorks 64-Bit/66MHz PCI-to-Fibre
Channel Host Bus Adapter for HP-UX
AIX
v4.3.2 & v4.3.3
v4.2 & v5.1
StorageWorks 64-Bit/66MHz PCI-to-Fibre
Channel Host Bus Adapter for AIX
2.01.19
No Firmware
1.5.11
NetWare
StorageWorks 64-Bit/66Mhz PCI-to-Fibre
5.4.6.63
Channel Host Bus Adapter
NOTE 1: The following patches need to be installed for the Solaris operating system:
Solaris v2.6: 105181-23, 105210-33, 105284-37, 105568-21, 105591-09, 105633-49, 105669-10, 106040-15, 106125-10, 106841-01, 106842-09,
107733-09, 108091-03
Solaris v7: 106980-10, 107636-03, 106541-11, 107544-03, 109104-01, 106950-09, 106327-08, 106300-09, 107081-20
Solaris v8: 108940-07
The order of patch installation is dictated by the patch dependencies as documented by Sun Microsystems for each patch. Patches can be obtained from the
http://access1.sun.com Web site. However, patch 109104-* is no longer available from access1. This is because Sun has rolled the functionality of 109104
into the latest kernel patch (106541-16). If a patch is not found or not up to the latest revision, a warning message is displayed. In the case of the 109104
patch, the warning message can be safely ignored if 106541-16 or greater is installed.
HARDWARE PREREQUISITES
•
SANworks Management Appliance
DISTRIBUTION MEDIA
This product is distributed on an individual product CD-ROM.
DOCUMENTATION
The SANworks Network View documentation consists of the following:
•
•
•
•
•
Installation Guide
Releases Notes
QuickSpecs
User’s Guide
Online Help
DA-10852
Canada — Version 7 — April 9, 2002
4
QuickSpecs
SANworks Network View V2.0A by Compaq
SOFTWARE LICENSING
SANworks Network View is licensed by the number of available Fibre Channel switch ports in the SAN being managed by the SANworks Network View
product. The licenses are sold in increments of 64, 128, 256, and 512 Fibre Channel switch ports. Licenses are additive allowing license combinations
that more closely match the number of available Fibre Channel switch ports in the SAN. Switch port amount can be applied to numerous fabrics.
Upgrade licenses are for version 1.0 to version 2.0A upgrades only and cannot be used for switch port upgrades.
Switch port licenses are additive.
This software is furnished only under a license. For more information about Compaq's licensing terms and policies, contact your local Compaq office.
SOFTWARE PRODUCT SERVICES
•
Software Support (Stand-alone telephone support)
•
Installation services
These software product services are sold under Compaq’s CarePAQ™ Services program.
•
•
CarePAQ is defined as an upgrade to the product warranty attribute, available for a specific duration and hours of coverage.
CarePAQ is available for sale anytime during the warranty period for most products, but the commencement date will be the same as the Warranty
Start Date (delivery date to end user customer). Proof of purchase may be required.
•
CarePAQ services are prepaid.
For additional information on Software Product Services and CarePAQ, as well as orderable part numbers, please refer to the URL listed below:
For additional CarePAQ (hardware & software and installation support) information for European and other countries, as well as orderable part numbers,
please refer to the URL listed below and select the country of your choice:
If you have specific questions about availability or how to obtain services contact your local Compaq representative. Contact information for your local
area can be found at:
Maintenance releases, bug fixes and software patches will be available at no charge to customers on the Compaq support Web site at:
NOTE: This Web site is available in English only.
SOFTWARE WARRANTY
COMPAQ warrants that the Software will perform substantially as described in the documentation accompanying the Software for a period of 90 days
from delivery.
DA-10852
Canada — Version 7 — April 9, 2002
5
QuickSpecs
SANworks Network View V2.0A by Compaq
ORDER INFORMATION
Part Numbers
235904-B23
235905-B23
236073-B23
236074-B23
261761-B22
261762-B22
261763-B22
261764-B22
265665-B21
Description
SANworks Network View v2.0A, 64 Switch Port License, Media, and Documentation
SANworks Network View v2.0A, 128 Switch Port License, Media, and Documentation
SANworks Network View v2.0A, 256 Switch Port License, Media, and Documentation
SANworks Network View v2.0A, 512 Switch Port License, Media, and Documentation
SANworks Network View Upgrade License v2.0A, 64 Switch Port, Media, and Documentation
SANworks Network View Upgrade License v2.0A, 128 Switch Port, Media, and Documentation
SANworks Network View Upgrade License v2.0A, 256 Switch Port, Media, and Documentation
SANworks Network View Upgrade License v2.0A, 512 Switch Port, Media, and Documentation
SANworks SAN Management Bundle
PHYSICAL DATA
The shipping dimensions are the same for all part numbers.
Shipping Dimensions
Height
Width
Depth
Weight
9.25 in/234.95 mm
8.25 in/209.6 mm
1.25 in/31.75 mm
3 lbs/1.36 kg
©2002 Compaq Canada Corporation. All rights reserved. Compaq is a trademark of Compaq Computer Corporation. Microsoft and Windows are trademarks
of Microsoft Corporation in the U.S. and other countries. The information in this publication is subject to change without notice. Printed in Canada.
DA-10852
Canada — Version 7 — April 9, 2002
6
|