Computer Tech Link Computer Monitor CTL9Ln User Manual

19Inch (Viewable size 18 )  
High Resolution Color Monitor  
Printed on the recyclable paper  
Printed in Korea  
Part No. 942149020003 - 01  
 
Introduction  
Introduction  
Caution  
Features  
Changes or modifications not expressly approved by the party responsible for compliance  
could void the user’s authority to operate the equipment.  
19-inch(18 inch visual)high performance display color monitor  
Warning  
Automatically scans frequencies from  
- Horizontal frequency: 30 to 96kHz  
- Vertical frequency: 47 to 150Hz  
If this equipment has more than one interface connector, do not leave cables connected to  
unused interfaces.  
Canadian Notice  
This Class B digital apparatus meets all requirements of the Canadian Interference Causing  
Equipment Regulations.  
Compatible with VGA, SVGA, VESA, MAC Standards and maximum resolution modes up to  
1600 1200.  
Avis Canadien  
Supports VESA flicker free modes including 85Hz refresh rate.  
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le  
matériel brouilleur du Canada.  
On Screen menu fingertip control system to visually select and adjust screen images using  
6 buttons on front panel and on screen menus.  
Notice  
The information contained in this document is subject to change without notice.  
Power supply operates on AC100~240Volt 50/60Hz for use all over the world.  
Equipped with DDC 1/2B for Plug & Play capability.  
Package  
First, we would like to thank you for your purchase of this monitor. This monitor is 19inch, high  
resolution, color display monitor. This manual covers the use, and points of caution, when  
operating this monitor.  
Please take the time to read this manual so that you will obtain the best performance and most  
use from your monitor. After reading the manual, store it in a safe place for future reference.  
Equipped with an energy-saving feature.  
Power management circuit when signaled by the computer system, will reduce power  
consumption when the computer system is not in use.  
Monitors with nonglare/antistatic screens are compliant with MPR  
1990 Emissions standards and meets requirements for CE Marking.  
TCO99 : (option)  
This items illustrated below are contained in the carton.  
First, be sure that your carton includes the following items.  
If any items are missing or damaged, please contact your local dealer or supplier.  
- Color Monitor  
- AC Power input cable  
- User’s Manual (Warranty Registration Card)  
4
User’s Manual  
User’s Manual  
5
 
Introduction  
Introduction  
Safety information  
Power management system  
Provided with this monitor is a detachable power supply cord with IEC320 style terminations.  
This monitor meets VESA(Video Electronics Standards Association) DPMS(Display Power  
Management Signalling)standards. In order for the monitor s power saving feature to function,  
It may be suitable for connection to any UL listed personal computer with similar  
configuration. Before making the connection ensure that the voltage rating of the computer  
convenience outlet is the same as the monitor and that the ampere rating of the computer  
convenience outlet is equal to or exceeds the monitor current rating.  
For 120Volt applications use only UL listed detachable power cord with NEMA configuration  
5-15P type(parallel blades) plug cap.  
®
the video board or computer must also meet VESA DPMSTM standards.  
Power management table  
Power saving function mode  
State  
Normal  
Operation  
Sync.  
Standby  
Inactive  
Suspend Mode Power-Off Mode  
For 240Volt applications use only UL listed detachable power cord with NEMA configuration  
6-15P type(tandem blades) plug cap.  
Horizontal  
Active  
Active  
Active  
Green  
Active  
Inactive  
Blanked  
AMBER  
Less than  
15W  
Inactive  
Inactive  
Vertical  
Video  
Active  
Blanked  
Blanked  
LED Color  
Power  
Green/AMBER  
Less than  
80% of MAX  
AMBER Blinking  
Less than  
5W  
Use only a power source and connection appropriate for the monitor as indicated on the  
marking label.  
120W  
Consumption  
Slots and openings in the cabinet are provided for ventilation;  
these openings must not be blocked or covered. Never push objects of any kind into cabinet  
slots or other openings.  
Note : The monitor automatically goes through the DPMS steps when it is idle.  
To release the monitor from the DPMS condition, press any key on the keyboard.  
Never insert anything metallic into the monitor openings.  
Doing so may create a danger of electric shock.  
Connection to your computer  
CAUTION  
To avoid electric shock, never touch the inside of the monitor.  
Only a qualified technician should open the monitor s case.  
Ensure that both the PC and the display monitor are switched off.  
To attach the monitor to your system, as shown in  
the following illustrations.  
Unplug the monitor from the wall outlet before cleaning. Do not use liquid cleaners or aerosol  
cleaners. Use a damp, lint-free cloth for cleaning.  
1. Connect the signal cable to the 15pin  
graphics connector of the system and tighten  
the fastening screws.  
Install the monitor near an outlet that you can reach easily. Disconnect the product by  
grasping the plug firmly and pulling in from the outlet.  
Never disconnect it by pulling the cord.  
2. Insert the AC power cord  
into monitor and  
then into an AC power outlet.  
3. To turn on the monitor, push the power switch.  
Note : To attach the monitor to the Macintosh system, please contact an authorized  
dealer.(Need to use a special adaptor)  
6
User’s Manual  
User’s Manual  
7
 
Installation  
Controls  
Additional up front controls  
Power Switch : Turns the monitor power on or off, When the power is on, the LED is lit.  
Pin assignment table D-Sub Mini 15pin connector  
1
5
Pin No.  
15 Pin D-Sub  
Red Video  
Green Video  
Blue Video  
Frame Ground  
N.C  
Macintosh  
Red Ground  
Red Video  
H/V Sync.  
Sense (0)  
Green Video  
Green Ground  
Sense (1)  
N.C  
1
2
Accessing on screen menu  
Press DO Button.  
10  
6
3
Controls  
Controls  
: Direct Brightness access.  
: Direct Contrast access.  
4
5
11  
15  
6
Red Ground  
Green Ground  
Blue Ground  
N.C  
Turning off on screen menu  
(15 Pin D-Sub)  
7
When in the main menu, press exit button.  
When in submenus, press the exit button twice.  
8
1
8
9
Blue Video  
Sense (2)  
Ground  
10  
11  
12  
13  
14  
15  
Sync. Ground  
Ground  
OSD Menus  
Main Menu  
SDA  
V-Sync.  
H-Sync.  
Blue Ground  
Ground  
9
15  
V-Sync.  
“ON SCREEN MENU”s Main Menu of Controls gives you an overview of the selection of controls  
available.  
SCL  
H-Sync.  
(Macintosh Adaptor)  
CONTRAST  
Function of controls  
OSD Controls  
“ON SCREEN MENU” controls include the following extended controls such as Size, Position,  
Geometry Distortion, Color temp, Degauss, Moire on & off, Language, OSD-Position, Recall,  
Cont & Brt, etc.  
EXIT  
DO  
50 %  
Use the  
or  
: Control buttons to scroll through all of the menus.  
Function of OSD buttons on the front of the monitor  
DO : In the main menu, proceeds to the selected menu .  
In a submenu, proceeds to the control in that sub-menu.  
Main Menu control guide  
EXIT : Exit the OSD controls.  
Controls  
Controls  
: Move the function to select one of the controls.  
: In the main menu, moves the fuction to select one of the controls.  
In a submenu, moves the bar in the or direction to increase or  
decrease the adjustment.  
Controls  
Controls  
: Move the function to choose.  
: Move the function to choose.  
DO : Proceed to the selected menu choice.  
EXIT : In the main menu, exit the OSD controls. In a submenu, exit to the OSD main menu.  
8
User’s Manual  
User’s Manual  
9
 
Controls  
Controls  
Geometry Controls Menu  
Contrast & Brightness Menu  
31.5KHz  
60Hz  
PP  
31.5KHz  
60Hz  
PP  
GEOMETRY  
PINCUSHION  
PARALLELOGRAM  
TRAPEZOID  
CONTRAST  
BRIGHTNESS  
The Geometry controls allow you to adjust the  
curvature or angle of displayed image.  
PINBALANCE  
TOP CORNER  
BOTTOM CORNER  
ROTATION  
50%  
50%  
50%  
EXIT : Exit the Brightness or Contrast menu.  
Cursor  
Cursor  
: Increase or decrease the Brightness  
: Increase or decrease the Contrast.  
Pincushion : Increase or decrease the curvature of the sides either inward or outward.  
Parallelogram : Increase or decrease the tilt of the sides either to the left or right.  
Trapezoid : Increase or decreases the bottom of the screen to be the same as the top.  
Pin Balance : Increase or decrease the curvature of the sides.  
Position Menu  
Top Corner : Increase or decreases the curvature of the top sides.  
POSITION  
Bottom Corner : Increase or decrease the curvature of the bottom sides.  
Rotation : Rotate the entire display clockwise or counterclockwise.  
: Move the image vertically up or down.  
: Move the image horizontally left or right.  
Geometry Menu Control Guide  
PRESS  
KEY  
EXIT : Exit to the main menu.  
Controls  
Controls  
: Move the function to choose.  
: Move the bar in the or direction to increase or decrease the  
adjustment.  
Size Menu  
SIZE  
Language Menu  
: Increase or decrease the vertical size of the  
image.  
LANGUAGE  
: Increase or decrease the horizontal size of the  
image.  
: Select the language using  
key.  
PRESS  
KEY  
PRESS DO KEY  
Position and Size Menu control guide  
EXIT : Exit to the main menu.  
Moire Control  
Controls  
Controls  
: Refer to Tall/Short (or  
)
: Refer to Narrow/Wide (or  
)
MOIRE CONTROL  
DO : Toggle position and size menu directly.  
: Select the H.Moire or V.Moire Adjust.  
: Adjust the Moire  
H. MOIRE ADJUST  
V. MOIRE ADJUST  
50%  
10  
Users Manual  
Users Manual  
11  
 
Controls  
Troubleshooting  
OSD Position Menu  
Troubleshooting guide  
POSITION  
: Moves the OSD Position vertically up or down.  
: Moves the OSD Position horizontally left or  
right.  
If your monitor is not performing properly, please use the following troubleshooting chart for  
quick solutions to common problems.  
PRESS  
KEY  
Problem  
Possible cause  
Remedy  
Is the power cord connected?  
Connect power cord.  
Color Adjust Controls Menu  
Is the power switch on?  
Turn on power switch.  
COLOR - TEMP  
RB - Red background raster  
Is the signal cable properly  
connected?  
Connect signal cable properly  
No Picture  
GB - Green background raster  
RB GB BB RG GG BG  
OSD  
BB - Blue background raster  
RG - Red level gain  
GG - Green level gain  
BG - Blue level gain  
USER  
50%  
Is the monitor in the power save  
mode?  
Press any key on the keyboard or  
move the mouse.  
USER  
6500K  
9300K  
EXIT : Exit to the main menu.  
Is the signal cable properly  
connected?  
Connect signal cable properly  
Controls  
Controls  
: Increase or decrease the Selected color adjustment.  
: Move the bar in the or direction to select the color setting  
(USER, 6500K, 9300K).  
Are there signals which are  
outside of the required frequency  
range?  
Input signals which are within the  
range of the monitor.  
Picture is  
unstable  
DO : Proceed to the selected Submenu choice (Press DO button for 5 seconds).  
Presetting : Select the desired color setting. The bar is replaced by the color setting choice  
“USER, 6500K or 9300K” Each color setting is adjusted at user mode to choose  
degree or Kelvin.  
Is the signal connector pin  
assignments correct?  
Use correct signal connector.  
Are there signals which are  
outside of the required frequency  
range?  
Use correct signal which within the  
frequency range of the monitor(If  
the signal is correct, adjust the  
controls to desired image.)  
Controls  
ICON  
Function  
The display  
image is not  
centered, too  
small or large.  
Information  
This control shows the Factory and user mode  
information.  
This control allows the video input level selection applied  
by signal source. (0.7Vp-p/1.0Vp-p)  
Video Level  
Rotation  
Rotate the entire display clockwise or counterclockwise.  
Is the magnetic object nearby?  
Move object far away.  
The color of  
image on screen  
is abnormal.  
Degauss  
This control removes the build-up of magnetic fields that  
can affect color purity and convergence.  
Is the pin arrangement of the  
signal connector correct?  
Use correct signal cable.  
Use degauss control.  
Note : The picture shakes while degaussing is taking  
place. After internal degaussing the circuitry takes about  
30 minutes to regain its maximum power.  
Recall  
This controls recalls certain factory setting such as size,  
position, geometry and color by pressing DO button.  
If the monitor is operation in a user mode, this controls  
has no effect.  
Zoom Menu  
: Increase or decrease the Vertical and Horizontal size  
of image at the same time.  
12  
Users Manual  
Users Manual  
13  
 
Specifications  
Appendix  
Preset Timings  
Electrical Specifications  
ITEM  
CTL 9Ln  
19 , 90 deflection, FST  
0.26mm (0.22 in Hor.)  
This Monitor B19BL has preset modes for the 14 most popular industry standards for Plug and  
Play capability.  
CRT Type  
CRT Dot pitch  
CRT Surface  
Horizontal  
Vertical  
Non-glare, ARASC  
H/V Separate, TTL, positive/negative  
H/V Composite, TTL, positive/negative  
RGB Analog (0.7Vp-p), positive  
75 Terminated  
Video  
Sync.  
Video  
Sync.  
Sync.  
Input  
Signal  
Video  
Horizontal  
Scanning  
30kHz~96kHz (Automatically)  
47Hz~150Hz (Automatically)  
1600Dots 1200Lines (Non-interlace)  
202.5 MHz  
frequency  
Vertical  
Maximum Resolution  
Pixel Clock(Max.)  
Display Size (Standard)  
Power Consumption  
Power Supply  
Resolution  
IBM  
VESA  
800/75Hz  
VGA/70Hz VGA/60Hz  
640/75Hz  
640/85Hz  
800/85Hz 1024/75Hz  
800 600 1024 768  
Horizontal 350mm, Vertical 262mm  
120 W  
Timing  
720 400  
31.469  
31.777  
3.813  
1.907  
25.422  
0.636  
70.09  
14.268  
0.064  
1.08  
12.711  
0.413  
640 480 640 480 640 480 800 600  
H-Freq  
A sec  
B sec  
C sec  
D sec  
E sec  
V-Freq  
Omsec  
Pmsec  
Qmsec  
Rmsec  
Smsec  
Pixel rate  
H-Polarity  
V-Polarity  
31.469  
31.777  
3.813  
1.907  
25.422  
0.636  
59.94  
16.684  
0.064  
1.048  
15.253  
0.318  
37.5  
26.667  
2.032  
3.81  
20.317  
0.508  
75  
13.333  
0.08  
0.427  
12.8  
43.269  
23.111  
1.556  
2.222  
17.778  
1.556  
85.008  
11.764  
0.069  
0.578  
11.093  
0.023  
46.875  
21.333  
1.616  
3.232  
16.162  
0.323  
75  
13.333  
0.064  
0.448  
12.8  
53.674  
18.631  
1.138  
60.023  
16.660  
1.219  
AC 100~240Volt 50/60Hz 3Hz  
D-Sub, 15Pin Connectors  
Unlimited  
Input Connector  
2.702  
2.235  
14.222  
0.569  
13.003  
0.203  
Display Colors  
85.061  
11.756  
0.056  
75.029  
13.328  
0.050  
Mechanical Specifications  
0.503  
0.466  
ITEM  
CTL 9Ln  
11.179  
0.019  
12.795  
0.017  
18.5 (W) 18.9 (D) 18.5 (H)  
470mm(W) 487mm(D) 470mm(H)  
21.6 (W) 22.6 (D) 22.4 (H)  
548mm(W) 574mm(D) 568mm(H)  
21.6Kg (47.6Ibs)  
0.027  
31.500  
Negative  
Negative  
0.021  
49.5  
Positive  
Positive  
Unit  
Dimension  
28.322  
Negative  
Positive  
25.175  
Negative  
Negative  
36  
Negative  
Negative  
56.25  
Positive  
Positive  
78.750  
Positive  
Positive  
Carton  
Resolution  
VESA  
MACINTOSH  
832/75Hz 1152/75Hz  
832 624 1152 870  
Net  
1024/85Hz 1280/75Hz 1280/85Hz 1600/75Hz 640/67Hz  
1024 768 1280 1024 1280 1024 1600 1200 640 480  
Weight  
Gross  
Timing  
25.2Kg (55.6Ibs)  
H-Freq  
A sec  
B sec  
C sec  
D sec  
E sec  
V-Freq  
Omsec  
Pmsec  
Qmsec  
Rmsec  
Smsec  
Pixel rate  
H-Polarity  
V-Polarity  
68.677  
14.561  
1.016  
2.201  
10.836  
0.508  
84.997  
11.765  
0.044  
0.524  
11.183  
0.015  
79.976  
12.504  
1.067  
1.837  
9.481  
91.146  
10.971  
1.016  
1.422  
8.127  
93.75  
10.667  
0.948  
1.501  
7.901  
35  
49.726  
20.11  
1.117  
68.681  
14.560  
1.280  
28.571  
2.116  
3.175  
21.164  
2.116  
66.667  
15  
0.086  
1.114  
13.714  
0.086  
30.24  
Negative  
Negative  
Environmental Specifications  
3.91  
1.440  
14.524  
0.559  
11.520  
0.320  
ITEM  
CTL 9Ln  
0.119  
0.406  
0.316  
75.025  
13.329  
0.038  
0.475  
12.804  
0.013  
135  
Positive  
Positive  
85.024  
11.761  
0.033  
0.579  
11.235  
0.011  
157.5  
Positive  
Positive  
75.000  
13.333  
0.032  
0.491  
12.800  
0.011  
202.5  
Positive  
Positive  
74.551  
13.414  
0.06  
75.062  
13.322  
0.044  
Operating  
Temperature  
32 F to 104 F (0 C to 40 C)  
-4 F to 140 F (-20 C to 60 C)  
10% to 85% R.H. Non-condensing  
Storage  
Humidity  
0.784  
0.568  
12.549  
0.02  
12.667  
0.044  
94.5  
Positive  
Positive  
57.284  
Negative  
Negative  
100  
Negative  
Negative  
14  
Users Manual  
Users Manual  
15  
 

Conair Styling Iron s3cs User Manual
Cuisinart Coffeemaker PG 26692 User Manual
Desa Portable Generator RGH3000 User Manual
Dynex Network Card DX FC202 User Manual
Edimax Technology Network Router AR 7024Um User Manual
Fundex Games Board Games Snakes Ladders User Manual
Fundex Games Games Billionaire User Manual
Garmin Air Cleaner G2 User Manual
GBC Laminator Pinnacle 27 User Manual
Global Machinery Company Portable Generator GEN800 User Manual