System Remote Control (SR-250) Buttons
The list below show the buttons
to use with your Control4 system.
Room Off: Turns off the devices in the room.
Room and List Navigator: Lists room, op-
tions, current time.
System Remote Control
SR-250
List: Displays system list in window. Use with
arrow and Select buttons.
Ambient Light Sensor: Enables backlight on
buttons when the room is dim.
Watch/Listen: Watch movies, TV. Listen to the
radio, CDs, etc.
User Guide
4: Press to turn on TV and the On-Screen
Navigator.
Programmable Buttons: Have your
Installer program these buttons for shortcuts. See
“Programmable Buttons” below
Introduction
Before you start to use the Control4® SR-250 (models
C4-SR250-Z-B and C4-SR250B-Z-B), ensure that the devices
in your Control4 system are added and configured. Note: The
SR-250B runs on OS 2.0 and later.
to identify and write down the functions.
Guide: Displays the channel guide (program lists)
for the device’s channels On-Screen. Also used to
toggle List or Grid views.
Prev: Goes to the previous screen.
PG Up/PG Dn: Pages up or down for the
device’s menus.
Uses and Features
Vol +/ Vol -: Increase or decrease the volume.
The System Remote Control SR-250 (or SR-250) is intended
to be used with a Control4 system. Use this guide along with
the Control4 System Quick Start Guide and Control4 System
User Guide online help for best results. These are located in
my.control4.com.
Left/Right, Up/Down Arrows: Moves
through the List Navigator or On-Screen.
Select: Selects an option on the
On-Screen or List Navigator.
Ch +/ Ch -: Move up or down channels.
MUTE: Mutes the audio.
Use the System Remote Control to:
INFO: Displays current channel/program info for
•
•
Navigate system menus and access media on a TV monitor
using the On-Screen Navigator.
Navigate system menus and access media using the System
Remote Control’s List Navigator.
the device.
MENU: Displays the menu for devices.
CNCL: Cancel last action for the device.
Play: Plays a movie or video.
Skip Forward/Skip Back: Skips through
This System Remote Control extends the capabilities of a ‘univer-
sal’ remote that simply learns the IR codes from TVs, VCRs, and
CD/DVD players.
a movie or video.
Pause: Pauses the movie or video.
Press Play to start.
Fast Forward/Rewind: Advances or rewinds
the movie or video.
DVR: Plays the DVR (digital video recorder) or
Features:
device.
•
•
Bi-directional communication with system components.
Backlit display that converts the Control4 Navigator into a
text format.
Stop: Stops the movie or video. Press Play to
start.
Record: Activates the current device’s record
function.
•
47 buttons total: 2 for quick access, 4 programmable, 8
transport control, plus alphanumeric keys.
ZigBee wireless.
Alphanumeric Keypad: Use to type letters or
numbers if you have an on-screen keyboard, or to
change channels, set light levels, or enter text.
•
•
Wake up when picked up or moved.
Programmable Buttons
If your Installer programs the colored buttons, note here what
they represent:
Battery Maintenance
Refer to the System Remote Control SR-250 Setup Guide for
instructions about how to install and maintain the batteries.
•
•
•
•
Red: __________________________________________
Green: ________________________________________
Yellow: ________________________________________
Blue: __________________________________________
This device requires four (4) AAA batteries.
For battery safety information, see the System Remote Control
SR-250 Setup Guide.
|