™
NEO-RAY
Ordering Information:
Sample number: 201-IP-SP-1T5HO-1C-277-DC48-T1-48
2-1/2"
[63mm]
S
Series
201-IP=Shell II
201-DI=Shell D/I
10-3/4" [275mm]
T8 = 1, 2, 3 Lamp
T5 = 2, 3, 4 Lamp
Optics Up
S=Specular
Construction: Housing is one-piece, die-formed,
cold rolled steel, forming a 10-3/4” x 2-1/2” curved
architectural profile. Perforated sections are 33%
open with staggered hole pattern and opal diffuser.
Standard 4’-0”, 8’-0” and 12’-0” luminaire lengths
combine for continuous runs.
Optics Down
P=Perforated (IP)
H=RPerformance ™ Louver (DI)
Number of Lamps (not included)
1=1 Lamp (T5HO)
2=2 Lamps(T5HO, T8)
3=3 Lamps (T5HO, T8)
4=4 Lamps (T8)
SHELL II
201-IP
201-D/I
Lamp Type (Length)
T5HO=54W (4’ Unit)
End Caps: End caps are precision die-cast
aluminum mechanically attached without exposed
fasteners.
T8=32W (4’ Unit)
Number of Circuits 1
1=1 Circuit 2=2 Circuits (*Standard 2 circuit option will switch
Inboard lamps together. Out board lamps will be on
circuit two.)
Reflectors: Center reflector is die-formed, highly
specular aluminum.
SEMI-INDIRECT (IP)
Wiring 1
DIRECT-INDIRECT (D/I)
C=Standard Circuit
E=Emergency/Nightlight T=Nightlight
*Slim line ballast only (small case)
B=Battery Pack
D=Dimming
Electrical: Luminaires are prewired with quick wire
connectors and use UL list Class P, T5HO or T8
program rapid start universal voltage electronic
ballasts. Power factor of 97% with less than 10%
THD. Fixtures and electrical components certified to
UL and CUL standards.
• Die formed steel perforated
modular housing lengths –
4’, 8’ and 12’ (201-IP only).
Voltage 1
1=120V
2=277V
3=347V
U=Universal
• Optional articulated joiners
[not suitable for precise
incremental mounting
centers]
Suspension
D=Dual Cable
P=Rigid Pendant 4 (single stem)
Finish: Luminaire housings are standard white
using electrostatically applied acrylic powder coat
paint.
Power Feed 1
C=Straight Cord
P=Rigid Pendant
K=Curly Cord
• Dual aircraft cable hangers
for superior leveling.
Suspension Length
-Adjustable Cable
Mounting: Standard mounting includes dual
aircraft cable and mounts directly to all ceiling
types. Row mounted fixtures are continuous with
hairline joints unless Articulated Joint option is
specified. Mounts on fixtures with Articulated Joint
option will not align with grids.
• Incremental mounting on the
ceiling grid - 4’, 8’ and 12’
(201-IP only) centers.
48”, 120”, 240”, 300” or 360” (infinite adjustment along entire cable)
-Rigid Pendant 2 12”, 15”, 18”, 21”, 24” or 27”
Ceiling Type
T1=1” T-Bar
T9=9/16” T-Bar
• Wide number of T5 and T8
lamping options.
ST=Structure
JB=4” Octagonal J-Box
TS=Slotted T-Bar
• Precision die cast end caps.
Run Length (Specify luminaire length in feet)
-Individually Mounted Luminaires may be 4’, 8’ or 12’ in length.
-Continuously Mounted Standard row configurations over 12’ consist
of 8’ and 12’ sections.
201-D/I features
• RPerformance TM parabolic
semi specular louver for RP-
1 compliance.
Joining 3
AJ=Articulated Joining Luminaire sections may be joined with an
optional aluminum coupler, which visually separates sections. Refer to
back page for mounting details.
• Die formed modular housing
lengths – 4’ and 8’
1 Due to various constraints, some options may not be combined with others.
2 Consult factory for custom rigid pendant lengths.
3 Articulated Joining option will not align with grids.
• Incremental mounting on the
ceiling grid - 4’ and 8’
centers.
= Slim Line Ballast only.
S
4 Available with 7° or earthquake 45° swivel canopy assembly.
AJ - Articulated Joining
END CAP
B
STANDARD LUMINAIRE LENGTHS*
10-3/4" [275mm]
2-1/2" [63mm]
1-1/4" [32mm]
Optional aluminum coupler
1-1/4"
8’
8’
NOTES: For complete product data, refer to the Neo-Ray Specification Binder. Specifications and dimensions subject to change without notice. Products may be
modified for use in international markets. Please contact your Cooper Lighting Sales Representative for availability and ordering information.
COOPER LIGHTING 717
|