Installation Instructions
Sheet 1 of 3
Large, OUTDOOR
P1R
(Pendant, 1-way, Remote ballast)
Visor and Non-Visor
Warning: Before starting any work ensure
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician. Do not
mount fixtures vertically.
Vault
C-Scroll
Roundel
These installation instructions are valid with the above Ametrix styles.
Exploded view and part call-out
Securing fixture to pendant
1
Mounting plate
Yoke
Mounting plate
Appropriate fasteners
(by others)
(2x)
Fixture wire
#10-32 x 3/8"
Pan head screw
(2x)
Wire connector
Canopy
#6-32 x 1/4"
Flat head screw
End cap
1/4-20 x 3/4"
Hex cap screw
(2x)
End screw
(2x)
#10-32
End screw
(2x)
1/4-20x 3/4"
Hex cap screw
(2x)
1. Begin by removing end screw, #6-32 x 1/4" Flat head screw
and end cap from one side of Yoke and remove fixture head.
2. Mount yoke to pendant with both 1/4-20 Hex cap screws.
3. Feed fixture wire through connector in pendant up through
mounting plate and reattach fixture head to yoke.
Attention:
Large fixtures require additional bracing/structure
around J-box to support fixture.
Mounting and wiring fixture
2
Sealing the fixture
3
J-box
(by others)
Use additional bracing
around J-box to support
fixture.
Appropriate
fasteners
(by others)
(4x)
#6-32 x 1/2"
Socket cap screw
(2x)
#6-32 x 3/8"
Pan head screws
(2x)
Canopy
Wire seal
#6-32 x 5/8"
Socket cap screw
1. Loosen #6-32x 3/8" Pan head screws and allow canopy to slide
down pendant.
2. Feed wires from J-box through wire ways in mounting plate
and secure fixture to bracing around J-box.
3. Attach appropriate wires and ensure all connections are
properly matched.
4. Replace canopy and secure with both #6-32 x3/8" Pan head
screws.
1. To seal fixture, secure all socket cap screws according to
sequence and torque specifications on supplementry sheet.
2. Ensure a smooth and sealed connection at wire seal.
3. For aiming instructions refer to aiming supplementry sheet
ADY071473 REV A(ECN070347)
Installation Instructions
Sheet 3 of 3
Large, OUTDOOR
P1R
(Pendant, 1-way, Remote ballast)
Visor and Non-Visor
Warning: Before starting any work ensure
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician. Do not
mount fixtures vertically.
Vault w/ visor
C-Scroll w/ visor
Roundel w/ visor
These installation instructions are valid with the above Ametrix styles
Lamping Size Chart
(lamps provided by others)
FIXTURE SIZE
# OF
Lamp
(not to scale)
(inches/ mm) WATTAGE LAMPS LAMP TYPE LAMP DESCRIPTION
16
16
16
/ 419.1
/ 419.1
/ 419.1
32 W
42 W
57 W
1
1
1
T4
T4
T4
Compact Flourescent
Compact Flourescent
Compact Flourescent
1/2
1/2
1/2
16
16
16
/ 419.1
/ 419.1
/ 419.1
100 W
150 W
175 W
1
1
1
ED17
T6
Ceramic Metal Halide
Ceramic Metal Halide
Ceramic Metal Halide
1/2
1/2
1/2
ED17
22
/571.5 mm
/571.5 mm
/571.5 mm
250 W
400 W
150 W
1
1
2
ET18
ET18
T6
Metal Halide
Metal Halide
1/2
1/2
1/2
22
22
Ceramic Metal Halide
22
22
/571.5 mm
/571.5 mm
32 W
42 W
2
2
T4
T4
Compact Flourescent
Compact Flourescent
1/2
1/2
22
22
22
/571.5 mm
/571.5 mm
/571.5 mm
250 W
400 W
150 W
1
1
2
ET18
ET18
T6
Metal Halide
Metal Halide
1/2
1/2
1/2
Ceramic Metal Halide
22
22
/571.5 mm
/571.5 mm
350 W
500 W
1
1
T3
T3
Halogen(Double Ended)
Halogen(Double Ended)
1/2
1/2
30
/ 774.7
/ 774.7
/ 774.7
/ 774.7
36 W
40 W
50 W
55 W
1
1
1
1
T5
T5
T5
T5
Twin Tube
Twin Tube
Twin Tube
Twin Tube
1/2
1/2
1/2
1/2
30
30
30
30
30
30
30
/ 774.7
/ 774.7
/ 774.7
/ 774.7
36 W
40 W
50 W
55 W
2
2
2
2
T5
T5
T5
T5
Twin Tube
Twin Tube
Twin Tube
Twin Tube
1/2
1/2
1/2
1/2
30
30
/ 774.7
/ 774.7
250 W
400 W
2
2
ET18
ET18
Metal Halide
Metal Halide
1/2
1/2
30
30
/ 774.7
/ 774.7
900 W
1
1
T3
T3
Halogen(Double Ended)
Halogen(Double Ended)
1/2
1/2
1000 W
ADY071473 REV A(ECN070347)
|