25-2-08
WARRANTY
Crosley Radio Products are warranted against defects in material and
workmanship for a period of 90 days beginning from the date of sale to the
original purchaser.
CR02-001A
Should the unit fail under normal usage during the 90 day warranty period, a
request for RETURN AUTHORIZATION (R.A.) must be made by the original
customer before returning the unit. Call Crosley Radio customer service for
Return Authorization at (502) 583-4246 from 9 AM to 5 PM (EST) Monday to
Friday.
Tempo Radio
Upon receiving the RETURN AUTHORIZATION number from the Customer
Service Department, properly pack your unit in its original packaging. Include
any adapters, parts, & accessories which were originally provided with the
product, along with a check or money order for $19.95 made out to Crosley
Radio to cover the handling and return postage. Display the R.A. # on the
outside of the carton and ship PREPAID via standard UPS or its equivalent.
Instruction Manual
AM/FM
CLOCK
ADJ.
SLEEP
SNOOZE/DIMMER
W
AKE-
T
O
ALM.SET
ALM.ON/OFF
+
VOLUME
-
ATTN: RETURNS DEP'T
2001 PRODUCTION DRIVE
BAY 2 & 3
+
iPOD/AUX
TUNE
-
LOUISVILLE, KY 40299
POWER
CROSLEY RADIO assumes no responsibility for units sent without prior Return Authorization.
The purchaser’s bill of sale is the only proof of warranty entitlement and must accompany the unit.
The warranty does not cover damage due to acts of nature, accident, misuse, abuse, negligence, commercial
use or modification of, or to any part of the product. This warranty does not cover damage due to improper
operation or maintenance, connection to improper voltage supply, or attempted repair by anyone other than
a facility authorized by Crosley Radio to service the product. This warranty does not cover products sold
AS IS or consumables (such as fuses or batteries). This warranty is valid only in the United States.
This warranty gives the purchaser specified legal rights in addition to any rights which may vary from state
to state.
In accordance with the "Moss-Magnuson Warranty Act" of July 10, 1975, this is termed a "limited warranty"
which in no way compromises Crosley Radio‚ high standards of Quality and Workmanship.
12
910-274200-0010-100
22-1-08
Operation
Getting Started
Using the Alarm
Listening to Your iPod
Unit Controls
1
2 3
4
5
6
7 8
Playing and charging your iPod
1
2
3
4
5
6
7
8
9
(iPod/Aux)/Play Button
Volume - Button
Volume + Button
Remote sensor
LCD Display
Tune + Button
Tune - Button
Setting the Alarm
1
Place the proper dock plate (not supplied) for
your iPod in the Dock (17), then gently dock
your iPod. When docked, the iPod will begin
charging. The iPod will not overcharge.
1
2
Press and hold the Alarm Set Button (15) until
the alarm time flashes.
+
+
TUNE
-
VOLUME
-
iPOD/AUX
POWER
Press the Tune + (6) or Tune - Button (7) to set
the alarm time(in 12 hour mode, a PM indicator
appears when time is set to PM; there is no AM
indicator.)
2
3
Press the iPod Button (1) to play iPod, and
again to pause.
Power On/Off Button
Speaker
Adjust the volume level to the desired listening
level by pressing the Volume + Button (3) or the
Volume – Button (2).
10 (BAND)AM/FM Button
11 Clock Adjust Button
12 Sleep Button
13 Snooze/Dimmer Button
14 Wake To Button
15 Alarm Set Button
16 Alarm ON/OFF Button
17 iPod Dock
3
4
Press Alarm Set Button (15) again. Alarm is now
set. An alarm clock icon will show on the display
as well as the alarm source icon.
4
Press the Alarm Reset/Power Off Button (8) to
turn the unit and the iPod off.
Press the Wake To Button (14) repeatedly to select
the desired wake to source: iPod, Radio or Buzzer.
9
NOTE:
Before turning the unit off, set the volume to the level
you wish to wake to.
Radio Operation
10 11 12
13
14 15 16
Arming and Disarming Alarm (Turn
Alarm Function ON and OFF)
Tuning and Playing the Radio
1
2
3
4
Press the Radio Button (31) to select radio
play mode.
1
Press the Alarm On/Off Button (16) to arm or
disarm alarm function. When armed, alarm
icon appears in display.
Press AM/FM Select Button (10/27) to select
AM or FM band.
AM/FM
CLOCK ADJ.
SLEEP
SNOOZE/DIMMER
WAKE-TO
ALM.SET
ALM.ON/OFF
Snooze
Press the Tune + (6) or Tune - Button (7) to tune
radio to desired station.
1
Press the Snooze/Dimmer Button (13/32) after the
alarm sounds. The alarm will be silenced and
come on again 9 minutes later. Snooze can be
pressed several times during the 1 hour alarm
cycle.
17
Press Volume + Button (3/25) or Volume - Button
(2/29) to adjust the volume to desired sound
level.
5
Press the Alarm Reset/Power Off Button (8) to
turn the radio off.
iPod and Radio using the Remote control
Press the Next track Button (26) or Previous track
Button (30) when iPod is playing,or hold to scan
current playing track.In Radio mode, press to tune
station,hold to scan Radio station.
8
5
IMPORTANT SAFETY INSTRUCTION
General
PLEASE READ CAREFULLY ALL THE FOLLOWING IMPORTANT SAFEGUARDS
THAT ARE APPLICABLE TO YOUR EQUIPMENT
Troubleshooting :
1. Read Instructions - All the safety and operating instructions should be read before the product is operated.
2. Retain instructions - The safety and operating instructions should be retained for future reference.
3. Heed Warnings - All warnings on the product and in the operating Instructions should be adhered to.
4. Follow Instructions - All operating and use instructions should be followed.
Symptom
Possible Problem
Solution
5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning.
6. Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards.
7. Water and Moisture - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimming pool; and the like.
8. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven
surfaces may cause the product and cart combination to overturn.
9. Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable
operation of the product and to protect it from overheating, and these openings must not be blocked
or covered, The openings should never be blocked by placing the product on a bed, sofa, rug, or
other similar surface. This product should not be placed in a built - in installation such as a bookcase
or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
10. Power Sources - This product should be operated only from the type of power source indicated on the marking label,
if you are not sure of the type of power supply to your home. Consult your product dealer or local power company. For
products intended to operate from battery power, or other sources, refer to the operating instructions.
11. Grounding or Polarization - This product may be equipped with a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet try reversing the plug, If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
12. Power - Cord Protection - Power - supply cords should be routed so that they are not likely to be walked on or pinched
by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the
point where they exit from the product.
Plug the AM loop antenna connector to the jack
on the back of the unit.
No AM band radio sound
but others OK
AM loop antenna is not connected
to the unit
Move the AM loop antenna away from the main
unit/iPod and rotate it for best reception
No AM band radio is very
noisy
AM loop antenna isn’t located
properly
Sound is distorted
Volume level is set too high
Sound source is distorted
Decrease the volume
If the iPod original sound source(MP3) is old or of
poor quality, distortion and noise are easily noticed
with high-power speakers. Try a different audio
source such as a music CD.
If you are using an external sound source like
older generation of iPod or iPod Shuffle, try
reducing the output volume on the device itself.
Also try turning bass boost OFF.
Unit/adaptor gets warm
after extended play at
high volume
This is normal
Turn unit off for a while or lower volume
13. Lightning - For added protection for this product during a lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage
to the product due to lightning and power - line surges.
14. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
15. Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result
in a risk of fire or electric shock.
16. Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch
dangerous voltage points or short - out parts that could result in a fire or electric shock. Never spill liquid of any kind
on the product.
17. Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
PROBLEMS?
18. Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel
under the following conditions;
5G iPod(iPod with video) or iPod nano
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating instructions. Adjust only those controls that
are covered by the operating instructions as an improper adjustment of other controls may result in damage and
will often require extensive work by a qualified technician to restore the product to its normal operation.
e. If the product has been dropped or damaged in any way.
RESET YOUR iPOD (as per apple website)
(will not affect music on your iPod)
1. Move the Hold switch ON and OFF(slide it to Hold, then turn it off again)
2. Press and hold the MENU + centre SELECT button until the Apple logo
appears (about 6-10 seconds). You may need to repeat this step.
NOTE : Please make sure that your iPod has the latest firmware. Check
instructions on how to upgrade firmware for you iPod.
f. When the product exhibits a distinct change in performance - this indicates a need for service.
19. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement
parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock, or other hazards.
20. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety
checks to determine that the product is in proper operating condition.
21. Wall or ceiling Mounting - The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
22. Heat - The product should be situated away from heat sources such as radiators. Heat registers, stoves, or other
products (including amplifiers) that produce heat.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful intereference to radio or
television reception, which can be determined by turning the equipment off and on , the user is encouraged to try to correct
the interference by one or more of the following measures:
-
-
-
-
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio TV technician for help.
11
Table of Contents
Operation
Welcome
Thank you for purchasing the Crosley Tempo Radio
(CR02-001A). Before operating this unit, please
read this manual thoroughly and retain it for future
reference.
Getting Started
Remote
Antennas
Control Locators....................... 5-6
Setting the Clock...................... 7
Battery Backup......................... 7
The Remote Control controls basic unit functions as
well as basic iPod functions when the iPod is docked
in the unit. Be sure to aim the remote towards the
LCD display.
Setting up Antennas
About This Manual
1
For external FM reception, the unit is provided
with a FM Antenna Wire (35), move the wire
until the reception is clear and with no
interferences.
Instructions in this manual describe the control
functions of the CR02-001A.
Operation
Install/Replace the Remote Control Battery
Using the Alarm....................... 8
Radio Operation....................... 8
Listening to Your iPod............. 8
Remote Control....................... 9
Sleep Mode............................. 9
Auxiliary Input.......................... 9
General
Included in the package:
Tempo Radio
The remote control battery is already installed at the
factory. When the remote control stops operating or
its range seems reduced, replace the battery with
a new one.
Remote Control
FM antenna wire
AM loop antenna
AC Adaptor
2
For AM reception, the unit is provided with a
directional build-in ferrite antenna. Rotate the
set to find the position in which the best reception
is obtained.
1
The battery door is located on the back end of
the unit.
3.5mm stereo cable
2
Squeeze notched tab A while pulling battery
door latch B to release the battery door latch
and take out the battery holder.
Troubleshooting Guide............ 10-11
AM Loop Antenna (34)
FM Antenna Wire (35)
Warranty................................... 12
A
Sleep Mode
Battery
door
latch
B
Sleep mode lets you sleep to your iPod
or the radio, gradually lowering the volume
until the unit shuts off at the selected time.
3
4
Insert a “CR2025“ 3-volt lithium battery. Make
sure the polarity (the +and - side of the battery)
is correct.
1
2
Press the Sleep Button (12) to select the
amount of time before it turns off : 120,90,60,30
or 15 minutes.
Replace the battery holder back in the remote
control.
NOTE :
Press the Volume +(3/25) or Volume - (2/29) to
set the sleep volume(this volume setting is
separate from your standard volume setting).
PLEASE RESPECT THE ENVIRONMENT:
DISCARD BATTERIES PROPERLY.
CAUTION: When replacing the battery, replace only
with the same or equivalent type.
Auxiliary Input Jack
Using Dimmer
Using the Auxiliary Input Jack
1
Press the Snooze/Dimmer Button (13/32) during
normal operation to adjust brightness of LCD
display.
1
A 3.5mm stereo cable comes with your radio.
You can use it to play non-docking iPod’s or
other audio devices by connecting one end of
the cable to the Aux In Jack (18) and the other
end plugged into the line out jack of the selected
device. Make sure there is no iPod docked in
your unit before using the Aux In Jack. Press
the iPod/Aux Button (1). AUX will appear on
the display and the device is ready to use.
9
Getting Started
Getting Started
Battery Back Up
Power Source
Unit Controls
The Crosley Tempo Radio uses a battery backup
system to maintain your clock and alarm settings
during a power outage. In the event of a power outage,
the battery backup will save your time and alarm
settings until power is restored. The display light will
also turn off until power is restored. To utilize the
battery backup, you must install two AA batteries. The
battery backup will not operate unless batteries are
installed. To install batteries, follow the instructions
below.
18 Aux In Jack
1
Plug the included AC adaptor cable into the
AC Adaptor Jack (19) and the other end into a
standard 120V wall socket. It does not operate
on batteries.
19 AC Adaptor Jack
20 FM Antenna Socket
21 AM Antenna Socket
22 Headphone Jack
23 Battery Compartment
DC15V 1.3A
AUX IN
Setting the Clock and Date
FM ANT.
AM ANT.
1
2
Press and hold the Clock Adjust Button (11).
The clock Display will flash.
1
2
3
Remove the Battery Compartment cover (23)
from the back of the unit.
18 19 20
21 22
23
Press the Tune + (6) or Tune - Button (7) until
the current time is displayed (in 12 hour mode,
a PM indicator appears when time is set to PM;
there is no AM indicator.)
Install two new AA batteries in the correct position
as shown inside the battery cover.
Remote Controls
33
Reinstall the Battery Compartment cover (23) .
24 Power ON/OFF Button
25 Volume + Button
26 Next track
3
4
Press the Clock Adjust Button (11) to accept
the time. The year display will flash.
NOTE :
Do not different batteries
Do not mix old and new batteries
27 (BAND)AM/FM Button
Press the Tune + (6) or Tune - Button (7) to
adjust the year and press the Clock Adjust
Button (11). The date display will flash.
24
25
28 Play/Stop
Button
29 Volume - Button
30 Previous track
31 Radio Button
32 Snooze/Dimmer Button
33 AC Adaptor
29
5
Press the Tune + (6) or Tune - Button (7) to
adjust the date and press the Clock Adjust
Button(11).The setting is complete.
VOL
34 AM Loop Antenna
35 FM Antenna Wire
30
31
32
26
27
28
RADIO
AM/FM
iPOD
SNOOZE
DIMMER
AM Loop Antenna (34)
FM Antenna Wire (35)
6
7
|