Instructions for Dual Travel Charger
Item # TC-2000
PLEASE READ THE INFORMATION BELOW AND FOLLOW ALL INSTRUCTIONS BEFORE USING THIS PRODUCT.
IMPORTANT WARNING:
This CHARGER is for charging rechargeable Li-Ion digital camera and camcorder batteries ONLY!
Attempting to charge any other batteries may damage the device, destroy the batteries and/or cause injury to the
user. Charging other batteries will void the warranty.
Features and Benefits:
Dual Battery Capability: Charge two batteries at the same time on the same charger without increasing the
charge time for either battery. Each battery is monitored and controlled individually on a separate circuit.
The TC-2000 charger is designed to work with changeable battery plates for charging various Li-Ion digital camera and
camcorder batteries.
Universal World Wide Voltage: Automatically switches from 100 to 240VAC
12Volt Car & Truck adaptor included
Battery Charging Plates included
CHOSING THE CORRECT BATTERY PLATE
1. Find the Plate labeled with the battery model for you camera.
(Battery plates are inscribed with the OEM battery # as well as the DigiPower battery #)
(The battery model can be found on the battery label, or check the camera instruction manual.)
2. Attach the battery plate by sliding it on to the Base Charger.
(Contacts on the Plate should slide towards the Charging Meter at the bottom of the charger)
Back Side
3. Slide the battery on to the cradle matching the battery terminals with the Plate contacts.
|