DigiTech Musical Toy Instrument Supernatural Ambient Verb User Manual

Supernatenl  
A M B I E N T V E R B  
 
If you want to dispose of this product, do not mix it with general household waste.  
There is a separate collection system for used electronic products in accordance with  
legislation that requires proper treatment, recovery, and recycling.  
WARNING  
For your protection, read the following:  
Private households in the 25 member states of the EU, in Switzerland and Norway may return their  
used electronic product free of charge to designated collection facilities or to a retailer (if you  
purchase a similar new one).  
Important Safety Instructions  
For countries not mentioned above, please contact your local authorities for a correct method of  
disposal.  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery,  
and recycling and thus prevent potential negative effects on the environment and human health.  
4. Do not use this apparatus near water.  
5. Clean only with dry cloth.  
6. Do not block any ventilation openings. Install in accordance  
with the manufacturer’s instructions.  
7. Do not install near any heat sources such as radiators, heat  
registers, stoves, or other apparatus (including amplifiers)  
that produce heat.  
8. Protect the power cord from being walked on or pinched  
particularly at plugs, convenience receptacles, and the point  
where they exit from the apparatus.  
9. Unplug this apparatus during lightning storms or when  
unused for long periods of time.  
10. No user serviceable parts inside. Refer all servicing to  
qualified service personnel. Servicing is required when  
the apparatus has been damaged in any way, such as power-  
supply cord or plug is damaged, liquid has been spilled  
or objects have fallen into the apparatus, the apparatus  
has been exposed to rain or moisture, does not operate  
normally, or has been dropped.  
11.WARNING:To reduce the risk of fire or electric shock, do  
not expose this apparatus to rain or moisture.  
12. Refer to labels on the unit, including bottom cover, for  
ELECTROMAGNETIC  
COMPATIBILITY  
This device complies with part 15 of the FCC Rules  
and the Product Specifications noted on the Declara-  
tion of Conformity. Operation is subject to the fol-  
lowing two conditions:  
this device may not cause harmful interference,  
and  
this device must accept any interference received,  
including interference that may cause undesired  
operation.  
Operation of this unit within significant  
electromagnetic fields should be avoided.  
use only shielded interconnecting cables.  
 
other markings and pertinent information.  
WARRANTY:  
We at DigiTech® are very proud of our products and back-up each one we sell with the following warranty:  
valid only in the United States.  
2. DigiTech warrants this product, when purchased new from an authorized U.S. DigiTech dealer and used solely within  
the U.S., to be free from defects in materials and workmanship under normal use and service.This warranty is valid  
to the original purchaser only and is non-transferable.  
3. DigiTech liability under this warranty is limited to repairing or replacing defective materials that show evidence of  
defect, provided the product is returned to DigiTech WITH RETURN AUTHORIZATION, where all parts and labor  
will be covered up to a period of one year (this warranty is extended to a period of six years when the product  
has been properly registered through our website).A Return Authorization number may be obtained from DigiTech  
by telephone.The company shall not be liable for any consequential damage as a result of the product’s use in any  
circuit or assembly.  
4. Proof-of-purchase is considered to be the responsibility of the consumer.A copy of the original purchase receipt  
must be provided for any warranty service.  
5. DigiTech reserves the right to make changes in design, or make additions to, or improvements upon this product  
without incurring any obligation to install the same on products previously manufactured.  
6. The consumer forfeits the benefits of this warranty if the product’s main assembly is opened and tampered with by  
anyone other than a certified DigiTech technician or, if the product is used with AC voltages outside of the range  
suggested by the manufacturer.  
7. The foregoing is in lieu of all other warranties, expressed or implied, and DigiTech neither assumes nor authorizes  
any person to assume any obligation or liability in connection with the sale of this product. In no event shall DigiTech  
or its dealers be liable for special or consequential damages or from any delay in the performance of this warranty  
due to causes beyond their control.  
NOTE: The information contained in this manual is subject to change at any time without notification. Some information  
contained in this manual may also be inaccurate due to undocumented changes in the product or operating system since  
this version of the manual was completed.The information contained in this version of the owner’s manual supersedes all  
previous versions.  
 
Congratulations!  
You have just purchased a DigiTech® digital effect pedal.  
Unlike many analog pedals, the number of hours digital pedals can be powered  
with 9-Volt alkaline batteries is limited due to the constant draw which digital  
signal processors require. Until battery technology advances to meet the  
requirements of digital pedals, we suggest that a battery be used mainly for  
demonstration and practice purposes.  
If you notice a change in the LED’s brightness, or the pedal will not switch from  
Bypass to Effect, replace the battery with a new 9-Volt alkaline battery or visit  
your local DigiTech dealer to obtain the optional power adapter and unleash the  
pedal’s full potential with unlimited power.  
 
 
Introduction  
More than a remarkable achievement, DigiTech’s HardWire® series represents  
a collection of significant improvements in guitar effects pedals.The HardWire  
series pedals provide a suite of well-known effects, each with superior tone  
and control. But these pedals go above and beyond their peers, providing such  
distinguishing features as true bypass, high voltage operation and true stereo  
processing with genuine Lexicon® reverbs, making them essential additions to the  
signal chain of players who know about sound quality and demand the utmost in  
performance.  
Included Items:  
HardWire Supernatural Stereo Reverb  
StompLock™  
Foot Switch Glow Sticker  
Hook-and-loop Pedalboard Pad  
Online Warranty Registration Information Card  
1
 
1 2 3  
4
5
Pedal Interface  
M I X  
L I V E L I N E S S  
D E C AY  
11  
6
7
8
12  
8
Supernatural  
A
M
B
I
E
N
T
V
E
R
B
9
10  
2
 
What Does This Do?  
1. Mix Knob - Controls the reverb level.Turn this knob clockwise to  
increase and counter-clockwise to decrease the reverb level.  
2. DC Adapter Jack - Connect the optional power supply to this jack.  
Use the proper supply for your area’s mains line voltage.  
3. Liveliness Knob - Controls the amount of high frequency response  
in the Reverb’s effect signal.Turn this knob clockwise to increase and  
counter-clockwise to decrease the high frequencies.  
4. Decay Knob - Controls the length of time it takes for the Reverb to  
fade out.Turn this knob clockwise to increase and counter-clockwise to  
decrease the reverb decay time.  
5. Type Knob - Selects one of 7 Lexicon® reverbs:  
plate -The classic studio reverb heard on countless hit records.  
plate mod - Plate reverb sweetened with chorus.  
shimmer - Ethereal reverb with cascading octave shifts.  
3
 
supernova - Deep space reverb with twisting flange and pitch  
shifting.  
shine - Shimmer reverb with a thick lush chorus added.  
pherb - Rich Lexicon Hall reverb with a hint of phasing.  
spring -The unmistakable classic ‘surfreverb.  
6. Input 1 (Mono) - Connect your instrument, the output of a pedal, or  
an amp effects send to this jack. Signals are heard at both outputs when  
only the Input 1 (Mono) jack is used.This jack enables battery power to  
the pedal when connected.To prolong battery life, disconnect the cable  
from the Input 1 (Mono) jack when not in use. If the optional Harman  
power supply is used, cables can remain connected.  
7. Input 2 - Connect a second input to this jack for stereo operation.  
Inputs 1 and 2 are processed separately through the Stereo Reverb  
effect then fed to Outputs 1 and 2 keeping true stereo separation  
between channels.  
4
 
8. Foot Switch Release Pins -These two pins are spring loaded  
hinges that hold the Foot Switch in place. See page 10 for information  
on accessing and changing the battery. See page 6 for more information  
about using and changing theTails Switch settings.  
9. Indicator LED - Lights when the effect is turned on.When battery  
power is low (approximately 15 minutes), the Indicator LED begins to  
dim giving you advanced warning that very shortly you will need to  
replace the battery.  
10. Foot Switch -Turns the effect on and off.  
11. Output 1 (Mono) - Connect this output to the input of a single  
guitar amplifier or amp effects return.  
12. Output 2 - Connect this output to the input of a second guitar  
amplifier when a second amp is being used.  
Note: Use unbalanced mono instrument cables only.  
5
 
Tails Switch  
The Supernatural features a switch that allows the reverb signal to continue  
being heard after the effect is bypassed.When theTails Switch is set ON, the  
Supernatural does not utilize true hardwire bypass. If you always want to use  
true hardwire bypass, set theTails Switch to OFF.When theTails Switch is OFF,  
reverb signal is cut off immediately when the effect is bypassed.  
TheTails Switch is located under the Foot Switch and is accessed by pressing  
in one of the Foot Switch Release Pins using the tip of a 1/4" guitar cable plug.  
Once the Foot Switch is removed, theTails Switch is visible inside the chassis  
next to the button switch that turns the effect on and off. Slide the switch to the  
left to turnTails ON and to the right to turnTails OFF.  
6
 
7
 
Amplifier Setup  
Optional  
Power  
Supply  
M
I
X
L
I
V
E
L
I
N
E
S
S
D
E
C
AY  
or  
Supernatural  
A
M
B
I
E
N
T
V
E
R
B
8
 
Effects Setup  
AMP RETURN  
AMP SEND  
Optional  
Power  
Supply  
M
I
X
L
I
V
E
L
I
N
E
S
S
D
E
C
AY  
Supernatural  
A
M
B
I
E
N
T
V
E
R
B
Note: If the amp effects loop has a mix control, set the mix to 100% full wet.  
 
9
Battery Operation  
In the event that battery power is completely depleted, HardWire pedals  
automatically switch into bypass.This eliminates the need to remove the pedal  
from your pedal chain if the battery is dead.To replace the battery, do the  
following:  
1. Using the tip of a 1/4” guitar cable, push one of the Release Pins in on  
either side of the Foot Switch, and remove it from the pedal chassis.  
2. Remove the battery from the battery compartment and disconnect  
the battery cable.  
3. Connect a new battery to the battery cable and put it back in the  
battery compartment. Make sure the battery cable does not interfere  
with the spring or pedal switch arm.  
4. Place one hole of the Foot Switch over its corresponding pin.  
5. Push the opposite pin in and lower the other side of the Foot Switch  
10  
 
into place over the depressed pin. Release the pin.When the Foot  
Switch is properly fastened, both release pins are flush with the outer  
side of  
Foot Switch  
the pedal.  
Pedal Switch  
Arm  
9VDC Battery  
Foot Switch  
Release Pin  
Battery  
Compartment  
Foot Switch  
Release Pin  
Spring  
Pedal Chassis  
11  
 
Performance Accessories  
The performance accessories make integrating a HardWire pedal into any pedal  
board a snap.The following accessories are included:  
Hook-and-loop Pedalboard Pad (designed to attach to the surfaces  
found on most commercial pedalboards)  
Foot Switch Glow Sticker (easily visible on dark stages)  
StompLock™ (keeps your settings where you want them)  
12  
 
Hook-and-loop Pedalboard Pad  
To attach the Pedalboard Pad, do the following:  
1. Peel off the existing rubber skid pad from the bottom of the pedal.  
2. Peel the adhesive protector from the back of the Pedalboard Pad.  
3. Apply the Pedalboard Pad to the bottom of the pedal.  
13  
 
Foot Switch Glow Sticker  
To attach the Foot Switch Glow Sticker, do the following:  
1. Peel the adhesive backing from the Foot Switch Glow Sticker.  
2. Apply the Glow Sticker to the top of the Foot Switch.  
14  
 
StompLock  
To place the StompLock over the pedal knobs, do the following:  
1. Set the knobs to your preferred setting.  
2. Gently push the StompLock over the top of the knobs.  
3. To remove the StompLock, gently lift one side and then the other.  
15  
 
Specifications  
Controls:  
Level, Liveliness, Decay,Type, On/Off Pedal  
Input 1 (Mono), Input 2, Output 1 (Mono), Output 2  
>1 MΩ (stereo), >500 kΩ (mono) - effect on  
1 kΩ - effect on  
Jacks:  
Input Impedance:  
Output Impedance:  
Input Impedance:  
Output Impedance:  
Power Supply:  
Current Draw:  
Power Consumption:  
Dimensions:  
True hardwire bypass - effect off  
True hardwire bypass - effect off  
9V Alkaline Dry Battery or Harman 9VDC power supply  
75 mA (typical at 9VDC)  
675 mW (typical w/optional power supply)  
5.25”(L) x 3.5”(W) x 2.15”(H)  
Weight:  
1.3 lbs.  
Optional Power Supply:  
PS0913DC-01 (JA, US, EU) (100-240VDC, 50/60 Hz)  
PS0913DC-02 (UK, AU) (100-240VDC, 50/60 Hz)  
16  
 
 
8760 South Sandy Parkway  
Sandy, Utah 84070  
PH (801) 566-8800  
FAX (801) 566-7005  
DigiTech® and HardWire® are  
registered trademarks of Harman  
Designed in the USA  
Copyright - Harman  
Printed in China  
HardWire® Supernatural  
Owners Manual 5020843-B  
Please visit our  
website at:  
 

Cooper Lighting Indoor Furnishings 217 User Manual
Coustic Stereo Amplifier 161SE User Manual
Crown Audio Stereo Amplifier 12000i User Manual
Curtis Coffeemaker ALPHA 1GT User Manual
Curtis Flat Panel Television LCD1924 User Manual
Curtis Flat Panel Television LCD3798 User Manual
EdgeStar Dishwasher PDW45E User Manual
GE Monogram Oven ZSC2000CWW User Manual
Generac Power Systems Portable Generator 00802 3 User Manual
GE Waffle Iron 898678 User Manual