GSM Bulk
DESCRIPTION
The easiest GSM solution to be integrated in your
systems.
Code: 8D0100 Audio supported
Code: 8D0097 Audio not supported
Code: 8D0101 50 poles connector
The growing demand for automatic devices has finally
seen the development of the Wireless market for the
most different applications.
Always careful to the market needs, Digicom
projected and carried out the new GSM Bulk.
ꢀ Dual-Band modem EGSM900/DCS1800
ꢀ Can be updated to GPRS Class2
ꢀ Standard ETSI GSM Phase 2+ compliant
ꢀ Radio GSM 900MHz Class 4 (2Watt
output power)
GSM Bulk is a Dual-Band GSM /GPRS modem (900-
1800 MHz) designed to be integrated into professional
equipments and to be used for Data and SMS
applications.
ꢀ Radio GSM 1800MHz Class 1 (1Watt
output power)
ꢀ External antenna (SMA connector)
ꢀ AT commands supported (GSM 07.07-07.05)
ꢀ Data transmission up to 9600bps V.32,
V.22bis, V.22, V.21
GSM Bulk has a serial interface with a 2x9 pin male
connector and can be easily
integrated in your applications.
The main aim of GSM Bulk is the one to offer a GSM
platform easy to use and integrate. Ready to be used,
it is supplied with a 5Vdc power supply circuit, with the
SIM card holder (plug-in type) and with the
professional antenna (SMA connector).
ꢀ V.110 ISDN Data transmission up to 9600bps
ꢀ Non-Transparent mode (RLP)
ꢀ SMS support PDU and Text mode (MO/MT)
ꢀ Voice Support (Code 8D0100)
ꢀ 6 General Purpose Input/Output
(optional)
On request it is possible to equip GSM Bulk with a
ꢀ Protected SIM card slot Plug-in type (3V)
ꢀ Data Interface: RS232 (male connector
2x9 pin)
2x25 pin male
connector for
particular
ꢀ LED indicator (logged/not-logged)
ꢀ Power Supply: 5Vcc +/-10%
ꢀ Size: 76 x 48 x 15 mm
needs.
GPRS Ready: Ready for the future
ꢀ Weight: 40 gr.
GSM Bulk can be updated to new standards and
functionalities. In applications where the “Always on”
function is required, it can be updated to the GPRS
function. In this way you can be always competitive
offering the best solutions of the moment to your
customers.
ꢀ Full Type Approval (R&TTE)
ꢀ CE Mark
The setup is carried out through a complete
set of AT commands, complying also with the
GSM ETSI 07.07 and 07.05 standards and
through the proper commands for the most
particular functions.
Even more performing
GSM Bulk is complete in all its functionalities: Data,
Voice and SMS (both in Text and PDU mode).
GSM Bulk 13.10.2004
|