Model SL6.2M
Extended Range
High Output Speaker
Key Features:
•
•
•
•
•
46 Hz – 20 kHz Response
250W Power Handling
90 dB High Sensitivity
Full-Bandwidth overload protection
Strong-Arm-MountTM for easy, flexible
aiming
•
•
Lightweight, unobtrusive plastic enclo-
sure
Easy access input terminals
General Description:
Technical Specifications:
Frequency Response 1(-10 dB) 48 Hz - 20 kHz
The SL6.2M provides high efficiency, high power
handling, and extended frequency response in a very
compact, plastic enclosure. It’s proven performance
and reliability position it as the correct choice for
small to medium theater surround applications.
Power Handling 2
Sensitivity 3
250 watts
90 dB, 1W/1m
8 ohms
Impedance
Max Calculated SPL
Horizontal Coverage4
Vertical Coverage4
Crossover Frequency
LF Transducer
HF Transducer
Protection
116 dB
The SL6.2M features a high-energy 6" low frequency
transducer, a pure titanium 1" high frequency
neodymium transducer mounted on a 100° x 100°
waveguide, and a crossover network with full
bandwidth protection. These components provide
wide dynamic range, smooth coverage, and
exceptional reliability.
100°
100°
1.8 kHz
6” (100 mm)
1” (25 mm)
Full System
Multi-Axis
100° x 90°
Spring, accepts 12 GA
ABS (paintable)
One person installation is simple using the included
EV Strong-Arm-MountTM. It provides ease of location
and aiming not possible with other brackets.
Suspension
Swing x Rotation
Terminals
The SL6.2M’s performance, reliability, and shape
make it ideal for digital age theaters.
Enclosure Material
16.5” x 9" x 11.75” (419 mm x
228 mm x 298 mm)
Dim (H x W x D)
Net Weight (each)
9.9 lbs (4.5 kg)
23 lbs (10.4 kg)
SAM™, hex key
Shipping Weight
Included Accessories
1 Half Space (wall mounting)
2 Long Term Program Rating: 3 dB greater than continuous pink noise
rating
3 Avg: Half Space (wall mounting)
4 When mounted with long axis in vertical plan
Architecture & Engineering Specs:
Frequency Response and Impedance:
The loudspeaker shall be a two-way system consisting of one 6”
(152mm) low-frequency transducer, a 1” (25mm) high-frequency
transducer with a Coherent Coverage Waveguide, and a frequency-
dividing network installed in a vented, line-array enclosure. The
network shall include a passive limiter for both the low-frequency
and high-frequency transducers. The loudspeaker system shall meet
the following performance criteria: Power handling, 250-Watts long
term program using IEC268-5 shaped pink noise; Frequency
response, 46 Hz - 20 kHz (-10 dB from rated sensitivity); Pressure
sensitivity, 90 dB at one watt, 200 Hz -10 kHz at one meter; Impedance,
8 ohms nominal, 6 ohms minimum. The high-frequency transducer
shall drive a waveguide to cover evenly 100° horizontally by 100°
vertically. The enclosure shall be molded of acrylic butyl styrene. The
enclosure shall be 16.5” (419mm) high, 9” (228mm) wide, 11.75”
(298mm) deep. The finish shall be a paintable black. The grille shall
be zinc plated, powder coated for corrosion resistance, and
restrained with a safety leash. The loudspeaker shall be adjustable
over a range of 100° horizontally and 90° vertically. The support
bracket shall be low profile and integral with the enclosure.
Beamwidth:
Block Diagram:
Directivity:
Dimension Drawings:
Front
Side
Top
Wall Plate
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: 800/955-6831
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other International locations. For customer orders, contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 736-4212
For warranty repair or service information, contact the Service Repair department at:
12000 Portland Avenue South, Burnsville, MN 55337
Phone: 952/884-4051, Fax: 952/884-0043
800/685-2606
© Telex Communications, Inc. 6/2002
For technical assistance, contact Technical Support at: 866/78AUDIO
Part Number 38110-153 Rev A
Specifications subject to change without notice.
|