SE-42/SE-62
External Wall-Mount Kit
for EVIDTM FM-Series
Installation Instructions
SE-42/SE-62 External Wall-Mounting Kit
The Electro-Voice® SE-42 and SE-62 External Wall-Mounting Kits feature a supportive attachment shell that al-
lows for an EVIDTM FM4.2 or FM6.2 (normally flush-mounted) loudspeaker to be externally mounted to a wall to
obtain desired mounting location and sound coverage.
Enclosure
Wall
Shell
Enclosure
Shell
Mounting
Loudspeaker
Brackets (x2)
System
Mounting
Screws (x4)
Step 1: Attach Mounting Bracket to Shell
Step 2: Attach Shell to Wall and Mount Loudspeaker
EVIDTM FM Series External Wall Mount Kits
Model Part No. Description
SE-42 ACC000037-000 Kit for Externally Wall-Mounting FM4.2 Loudspeaker
SE-62 ACC000038-000 Kit for Externally Wall-Mounting FM6.2 Loudspeaker
* Note - All hardware to mount Loudspeaker System to Enclosure Shell is included with kit. However, the end customer must
supply all hardware to mount Enclosure Shell to Wall.
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: 800/955-6831
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
Electro-Voice®
12000 Portland Avenue South, Burnsville, MN 55337
Phone: 952/884-4051, Fax: 952/884-0043
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other Internatonal locations. For customer orders, Contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 887-9212
For warranty repair or service information, contact the Service Repair department at:
800/685-2606
© Bosch Communications Systems
02/2008
For technical assistance, contact Technical Support at: 866/78AUDIO
Part Number LIT000232 Rev 1
Specifications subject to change without notice.
|