EverFocus Film Camera ECOR264 D2 User Manual

Operating elements ECOR264-D2 Quick Reference Guide

Power LED: This LED ON indicates Power on.

16 Alarm LED: This LED ON indicates Alarm active.

17 HDD LED: This LED ON indicates HDD active.

18 Network LED: This LED ON indicates Network active.

Description of on-screen main menu (control bar)

DVD+RW: DVD+RW burner for DVD model. (D models only)

◄◄/◄I : Fast reverse playback or step reverse playback depending on

playback mode.

◄/ II: Reverse playback or pause

►/ II: Forward playback or pause

Express menu (manual chapter 4.2)

Camera menu (manual chapter 4.3)

►►/I►: Fast Forward playback or step forward playback depending on playback mode.

Enter/ Arrow keys: Instead of or in combination with a mouse, you can use these

keys to change the Menu settings.

Record & Play menu (manual chapter 4.4)

Menu/ESC: Press this key to enter/exit MAIN SETUP MENU.

USB 2.0 (front):

firmware upgrades.

For connecting USB-Flash-Drive to copy/archive video or for

Alarm & event menu (manual chapter 4.5)

Schedule menu (manual chapter 4.6)

Channel keys 1~8 (1~4):

- Press channel key (CH1~CH8) / (CH1~CH4) to display that channel in full screen view.

- Press channel key again for 2x electronic zoom.

Network menu (manual chapter 4.7)

Disk menu (manual chapter 4.8)

Live: Press this key to show live view. Press to exit from playback mode.

View: Press this key to switch between 4x, PiP (Picture In Picture), full screen and 9x.

Note: 1. PIP display is not available in playback mode.

2. This key is also used for BNC and VGA selection at the initial setup.

Display menu (manual chapter 4.9)

System menu (manual chapter 4.10)

Information menu (manual chapter 4.11)

SEQ: Press this key to enter the auto sequential switching mode. The sequence

dwell time can be set in “Display Setting” tab of the Menu.

13 Search: Press this key to enter Search Menu.

Copy: Press this key to enter Copy Menu.

P/N: 4605XECR04002AR_Ver.A