ZBD6920PSS/ZBD6910PBB/ZBD6900PII
GE Monogram® Fully Integrated Built-In Dishwashers
Dimensions and Specifications (in inches)
Custom Panel for Model ZBD6900PII
These dishwashers require a field installed 3/4” thick custom
panel and custom handle. An installation template is
packed with these models and may be obtained in advance.
Order Pub. No. 31-30569-1. Complete panel installation
instructions are included on the template.
• The dishwasher must be installed so that the drain hose
is no more than 10 feet in length for proper drainage.
• Water and power supply should enter in the
shaded area.
• Electrical and water connections are at the right front
of the dishwasher. The hot water line should extend
forward 30" to 40" from the rear wall. The electrical
must extend forward at least 24" to reach the junction
box.
CUSTOM PANEL SIZE REQUIREMENTS
HEIGHT
Panel height must
be between
30-1/16" and 30-1/4".
• To prevent siphoning, an air gap must be used when
the waste tee or disposer connection is less than 18"
above the floor.
• If the panel height is
more than 30-1/4” it
30-1/16" Min.
30-1/4" Max.
will prevent the door
from swinging open.
• If the panel height is
less than 30-1/16” it
will not cover the
dishwasher door
This Wall Area
must be Free of
23-3/4"
Pipes or wires
Cabinets
24"
34-1/2" Min.
Underside of
Countertop
to Floor
Square
and
5"
5"
Min.
4"
frame.
4"
• The top of the custom panel must be flush with the top
of the door. The 1/2” minimum gap between the top
of the door and the bottom of the countertop must be
maintained.
Plumb
6"
24" Min.
34"
Countertop
Adjustable
to 35"
Floor MUST
be Even with
Room Floor
WIDTH
Panel width must be 23-3/4".
• If the panel width is less than
23-3/4” it will not cover the
dishwasher frame.
IMPORTANT: To ensure
optimum door balance
1/2" min.
Minimum 1/2" gap
for Clearance
*24"
24"
*Dishwasher models
ZBD6900 and ZBD8900
require a 3/4" thick
custom panel and will be
24-3/4" deep.
performance, the custom panel must not weigh
more than 14 lbs.
Accessories for custom panel model ZBD6900
ZPR0700S door panel provides a professional-style handle
on a stainless steel door panel.
ZTB700 stainless steel tubular handle for installation onto a
custom panel.
Electrical Requirements
The dishwasher must be supplied with 120V, 60Hz, and
connected to an individual properly grounded branch
circuit protected by a 15- or 20-amp circuit breaker or
time-delay fuse.
Before installing refer to installation instructions for
details. Pub. No. 31-30586
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
As an EnErgy StAr®
Listed by
partner, gE has determined
that this product meets the
EnErgy StAr guidelines
for energy efficiency.
Underwriters
Laboratories
Specification Created 8/08
150051
ZBD6920PSS/ZBD6910PBB/ZBD6900PII
GE Monogram® Fully Integrated Built-In Dishwashers
Features and Benefits
• Hidden, integrated electronic controls maintain the
overall clean appearance of the exterior.
• Generously sized interior provides the space and
loading flexibility necessary to accommodate
16 place settings.
• Quiet operation (48 dBA) is made possible by
advanced sound-absorbing materials and
a smooth-running motor.
ZBD6920PSS
• As an EnERGY STAR® partner, GE has determined
that all Monogram full-size dishwashers meet the
EnERGY STAR guidelines for energy efficiency and
water conservation.
• Stainless steel tub retains its attractive shine cycle after
cycle, year after year.
• Pearlescent gray, ball-tipped nylon-coated racks
have an elegant silver-gray finish that complements
the stainless steel interior.
ZBD6910PBB
• Extraclean turbidity sensor continually monitors the
amount of soil on dishes and makes the necessary
wash-cycle adjustments for an exceptional clean.
• Powerful, forced-air drying system continually extracts
moist air from the tub, leaving dishes thoroughly dry
and ready to use.
• Three spray arms provide complete cleaning coverage,
even when the dishwasher is fully loaded with plates,
bowls and pots.
• Model ZBD6920PSS – Stainless steel
• Model ZBD6910PBB - Black
ZBD6900PII
• Model ZBD6900PII - Requires custom panel
• Accessory: ZPRo0700S - Professional-style
stainless steel door panel kit
• Accessory: ZTB700 - Stainless steel
tubular handle kit
ZPRo0700S pro panel kit
Specification Created 8/08
150051
|