GE Ventilation Hood ZVB30BN User Manual

ZVB30SN/BN  
GE Monogram® 30" Telescopic Downdraft Vents  
Dimensions and Installation Information (in inches)  
Separate Raise/  
Lower Switch  
All 30" models are equipped with a separate raise/lower  
switch. The switch must be installed in a separate location  
outside of the vent and cooktop cutout.  
Countertop Requirements  
Countertops must have a deep flat surface to accommodate  
the cooktop and the vent. Countertops with a rolled edge and  
backsplash may not provide the flat surface area required.  
Base Cabinet Requirements  
The base cabinet must be deep enough to accommodate the  
minimum clearance to the front edge of the countertop, the  
cooktop burner box and the vent.  
Downdraft Vent and Cooktop Cutout  
The installation of these downdraft vents with any Monogram  
cooktop requires careful consideration. For accurate planning,  
review the individual dimension drawings for the combined vent  
and Monogram cooktop installation.  
Before you begin you must:  
1. Review countertop dimension illustrations to be sure you will  
have enough flat countertop surface depth.  
2. Check to be sure that the total countertop depth required  
(including minimum cutout to front edge depth) allows enough  
space for a backsplash.  
3. Review the cabinet illustration. Check to be sure that the  
interior cabinet depth will house the cooktop burner box, the  
vent and the cutout clearance from the front.  
4. When countertop and cabinet depth present a problem, review  
Creative Solutions.  
5. Carefully review the installation instructions packed with  
With careful planning you can achieve a custom look with  
minimal adjustments.  
For answers to your Monogram,® GE Profileor  
GE® appliance questions, visit our website at  
ge.com or call GE Answer Center® service,  
800.626.2000.  
Listed by  
Underwriters  
Laboratories  
Specification Created 11/08  
130677  
 
ZVB30SN/BN  
GE Monogram® 30" Telescopic Downdraft Vents  
Dimensions and Installation Information (in inches)  
Venting Options  
The downdraft vent is shipped with the discharge outlet  
pointing straight down and can be changed to a left- or  
right-side discharge. For even more flexibility, the entire  
blower and mounting plate can be adjusted 3-1/2" to the  
left or right sides.  
Electrical and Gas Locations  
Plan the placement of the electrical outlet and gas (if used)  
carefully. Gas or electrical outlets cannot be located on the  
back wall of the cabinet because they may interfere with the  
downdraft plenum.  
• Install a standard electrical outlet within reach of the  
vent’s two-foot-long power cord. Locate the outlet inside  
the cabinet on the right side wall.  
• If the vent is installed in combination with a Monogram®  
gas cooktop, it may operate from the same 120V standard  
duplex outlet.  
• If the vent is installed in combination with a Monogram  
electric cooktop, the vent must operate from a separate  
120V outlet.  
Do Not Locate Gas or Electrical  
Connections Within Shaded Area  
29-1/2"  
Electrical  
Outlet  
12" Above  
Cabinet Floor  
34" for 36" Models  
28-1/2" for 30" Models  
For answers to your Monogram,® GE Profileor  
GE® appliance questions, visit our website at  
ge.com or call GE Answer Center® service,  
800.626.2000.  
Listed by  
Underwriters  
Laboratories  
Specification Created 11/08  
130677  
 
ZVB30SN/BN  
GE Monogram® 30" Telescopic Downdraft Vents  
Features and Benefits  
• Raises To 8-1/2” Over Cooktop Surface When  
You Cook, Then Retracts When Not in Use  
• 500-CFM Performance Helps Keep Your Kitchen  
Free of Fumes and Excess Heat  
• Remote-Mounted Control Provides  
Design Flexibility  
• Variable-Speed Blower with Electronic Controls  
Complements Most Monogram Cooktops  
• Removable Grease Filters Trap Airborne  
Grease Particles  
• Optional Remote Blower Capabilities  
• Stainless Steel Vent Body Offers a Smooth and  
Polished Appearance  
• Model ZVB30SNSS - Stainless steel (shown)  
• Model ZVB30BNBB - Black on black  
For answers to your Monogram,® GE Profileor  
GE® appliance questions, visit our website at  
ge.com or call GE Answer Center® service,  
800.626.2000.  
Specification Created 11/08  
130677  
 

Cuisinart Blender SPB 10 Series User Manual
Curtis Conference Phone TID911 User Manual
Curtis DVD Player DVD1098C User Manual
Dymo Label Maker H 1265 User Manual
Dynaudio Speaker BM12S User Manual
Frigidaire Cooktop FGEC3045K User Manual
Frigidaire Dehumidifier 66166045 User Manual
Frigidaire Ventilation Hood LI30MB User Manual
Fujitsu Server CM71 00101 5E User Manual
Gigabyte Server AP64D User Manual