Specifications — System 8 Plus Switcher
Video
Gain ............................................... 0 dB, unity
Bandwidth .................................... 300 MHz (-3 dB)
Differential phase error .............. 0.01º at 3.58 MHz and 4.43 MHz
Differential gain error ................. 0.01% at 3.58 MHz and 4.43 MHz
Crosstalk ....................................... -35 dB @ 10 MHz (typical)
Isolation......................................... -55 dB @ 10 MHz (typical)
Video input
Number/signal type ................... 8 or 10 RGBHV, RGBS, RGsB, S-video, or NTSC/PAL composite video
Connectors .................................... (8 or 10) x 5 BNC female
Nominal level ............................... 1 Vp-p for Y of S-video and for composite video
0.7 Vp-p for RGB
0.3 Vp-p for C of S-video
Minimum/maximum levels ...... Analog: 0.3 V to 2 Vp-p
TTL: up to 5 Vp-p
Impedance .................................... 75 ohms (deselected inputs)
Horizontal frequency .................. 15 kHz to 150 kHz
Vertical frequency ....................... 30 Hz to 150 Hz
Return loss .................................... <-25 dB @ 10 MHz
Video output
Number/signal type ................... 1 RGBHV, RGBS, RGsB, or
1 S-video (NTSC/PAL), or
1 composite video (NTSC/PAL)
Connectors .................................... 5 BNC female (RGBHV/RGBS/RGsB)
2 BNC female (S-video)
1 BNC female (composite video)
Nominal level ............................... 1 Vp-p for Y of S-video and for composite video
0.7 Vp-p for RGB
0.3 Vp-p for C of S-video
Minimum/maximum levels ...... 0.3 V to 2.0 Vp-p
Impedance .................................... 75 ohms
Return loss .................................... -30 dB @ 5 MHz
DC offset ....................................... None
Switching type ............................. Triple-Action™; 0 s to 7.5 s, adjustable
Sync
Input type ..................................... RGBHV, RGBS, RGsB
Output type .................................. RGBHV, RGBS, RGsB
Standards ...................................... NTSC and PAL
Input level ..................................... 0.5 V to 5 Vp-p
Output level.................................. 0.5 V to 5 Vp-p, unterminated
Input impedance.......................... 510 ohms (deselected inputs)
Output impedance ...................... 75 ohms
Max input voltage ....................... 5 Vp-p
Input sensitivity ........................... 5 Vp-p
Polarity .......................................... Positive or negative (follows input)
Audio
Gain ............................................... Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response..................... 20 Hz to 20 kHz, 0.05 dB
THD + Noise ................................ 0.015% @ 20 Hz to 20 kHz, worst case
S/N ................................................ >95 dB at maximum output
1-2
System 8 Plus • Specifications
Specifications — System 8 Plus Switcher (continued)
Compliances ................................. CE
MTBF ............................................. 30,000 hours
Warranty ....................................... 3 years parts and labor
All nominal levels are at 10%.
Specifications are subject to change without notice.
(7.51-082704-D3)
1-4
System 8 Plus • Specifications
|
Electro Voice Portable Speaker S 1803ER User Manual
EverFocus Switch ESM308T000D User Manual
Fisher Price Baby Toy C0108 User Manual
Fisher Price Motorized Toy Car 74180 User Manual
Fujitsu Air Conditioner AOU09RL2 User Manual
Furman Sound Music Pedal SPB 8 8E User Manual
GE Blender 169099 User Manual
Gemini Turntable PT 2000 User Manual
Genesis Advanced Technologies Speaker G61e User Manual
Gigabyte Mouse GM R03 User Manual