Fujitsu MP3 Player Accessories CM41004111E User Manual

FUJITSU SEMICONDUCTOR  
MICROCONTROLLER MANUAL  
CM41–00411–1E  
F2MC-8L FAMILY  
MB2142-01 LAN ADAPTER  
USER’S MANUAL  
 
Preface  
J Purpose and Target Readers  
2
The MB2142-01 is a support tool (LAN adapter) for developing and evaluating applications using the F MC  
family. Connect the MB2142-01 to the main unit (MB2141) to allow the main unit to communicate with a host  
computer (personal computer) via a LAN.  
2
The manual is for engineers who use the MB2142-01 to develop applications for the F MC. It describes the  
handling and connections of the MB2142-01.  
Reference manual:  
MB2140 Series Main Unit (MB2141) User’s Manual  
J Composition  
The manual is composed of the following two chapters. Read the manual thoroughly before use.  
Chapter 1 Product Handling  
Describes product and handling of LAN adapter  
Chapter 2 Connections and Power-On Sequence  
Describes connections and power-on sequence of LAN adapter  
iii  
 
Table of Contents  
1. PRODUCT HANDLING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1  
1.1 PACKAGE CHECK AND NAMES OF COMPONENTS . . . . . . . . . . . . . . . . . . 1-3  
1.2 SPECIFICATIONS OF LAN ADAPTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4  
1.3 SPECIFICATIONS OF INTERFACE CABLE . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6  
1.4 PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7  
2. CONNECTIONS AND POWER-ON SEQUENCE . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1  
2.1 SYSTEM CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3  
2.2 CONNECTING TO MAIN UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4  
2.3 CONNECTING TO NETWORK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6  
2.4 POWER-ON SEQUENCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7  
iv  
 
Tables  
Table 1-1 Specifications of LAN Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4  
Table 1-2 LAN Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5  
Table 1-3 Components of Interface Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6  
Table 1-4 Specifications of Interface Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6  
Table 1-5 Operating and Storage Environments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7  
v
 
Figures  
Fig. 1.1 Appearance of LAN Adapter (Top View) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3  
Fig. 1.2 Dimensions of Interface Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6  
Fig. 2.1 System Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3  
Fig. 2.2 Connecting Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4  
Fig. 2.3 Example of Connecting to Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6  
vi  
 
1. PRODUCT HANDLING  
1.1 PACKAGE CHECK AND NAMES OF COMPONENTS 1-3  
1.2 SPECIFICATIONS OF LAN ADAPTER . . . . . . . . . . . . . 1-4  
1.3 SPECIFICATIONS OF INTERFACE CABLE . . . . . . . . 1-6  
1.4 PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7  
 
PRODUCT HANDLING  
This chapter describes the handling and specifications of the LAN adapter. Read this chapter thoroughly be-  
fore using the LAN adapter, and check the package for the required products.  
1.1 PACKAGE CHECK AND NAMES OF COMPONENTS  
Check the package for the following parts before using the LAN adapter.  
LAN adapter: 1  
Interface cable: 1  
J Appearance of LAN adapter and names of components  
Figure 1.1 shows the appearance of the LAN adapter. For more information on connections, see Chapter 2.  
LAN connector  
Interface connector  
Fig. 1.1 Appearance of LAN Adapter (Top View)  
The component functions are given below.  
Interface connector: Connects interface cable  
LAN connector: Connects LAN cable  
1-3  
 
PRODUCT HANDLING  
1.2 SPECIFICATIONS OF LAN ADAPTER  
Table 1-1 and 1-2 list the specifications of the LAN adapter and LAN, respectively.  
J Specifications of LAN adapter  
Table 1-1 lists the specifications of the LAN adapter.  
Table 1-1 Specifications of LAN Adapter  
Item  
Specifications  
Name  
Model  
LAN adapter  
MB2142-01  
1
Power supply  
Voltage: +5 V±5%, Current: +1 A *  
5° to 40°C  
Working temperature  
Working humidity  
Outside dimensions  
Weight  
30 to 80% (No condensation)  
2
120 mm (W) × 26 mm (H) × 90 mm (D)*  
3
220 g*  
*1 Power is supplied from the main unit.  
*2 Except protrusions  
*3 Except pod interface cable  
1-4  
 
PRODUCT HANDLING  
J LAN Specifications  
Table 1-2 lists the specifications of the LAN.  
The LAN connector is a BNC (10BASE-2) type.  
Table 1-2 LAN Specifications  
Specifications  
Item  
Communication type  
IP address  
TCP/IP  
Variable  
Variable  
Port address  
Ethernet address  
Ethernet global address  
Ethernet local address  
Global address/local address  
Fixed value (IEEE registered)  
Variable  
Note: The IP address, port address and Ethernet local address are set from the host  
computer via the RS-232C by the LAN address write program supplied with  
the emulator debugger.  
For more information, refer to the Emulator Debugger Installation Manual.  
1-5  
 
PRODUCT HANDLING  
1.3 SPECIFICATIONS OF INTERFACE CABLE  
Table 1-3and1-4listthecomponentsandspecificationsoftheinterfacecable, respectively. Figure1.2shows  
its dimensions.  
J Specifications of interface cable  
For the connections to the main unit and pod, see 2.2.  
Table 1-3 Components of Interface Cable  
Component name  
Remarks  
Fujitsu  
Connector FCN-237R068-G/E × 2  
Cover FCN-230C068-C/E × 2  
Fujitsu  
Table 1-4 Specifications of Interface Cable  
Item  
Description  
1 A (dc)  
Rated current  
Operating  
Storage  
–10° to +60°C  
–10° to +60°C  
140 g  
Temperature  
Weight  
Connector (FCN-237R068-G/E)  
300 ±10  
Fig. 1.2 Dimensions of Interface Cable  
1-6  
 
PRODUCT HANDLING  
1.4 PRECAUTIONS  
Take the following precautions when using the LAN adapter.  
J Precautions  
Take the following precautions when using the LAN adapter.  
Turn off the power before connecting/disconnecting cables.  
Hold the case/connector when disconnecting a cable.  
Never touch any connector pins to avoid dielectric breakdown.  
Do not obstruct the ventilation holes.  
Install and use the LAN adapter according to this manual.  
J Storage  
Take the following precautions when storing the LAN adapter.  
Do not drop the LAN adapter in storage.  
Do not expose the LAN adapter to direct sunshine, high temperature and high humidity. Also, keep it  
condensation free.  
Avoid storing the LAN adapter where it may be exposed to strong electric or magnetic fields for long peri-  
ods.  
Table 1-5 shows storage temperature and humidity.  
Table 1-5 Storage Environments  
Storage Temperature  
Storage Humidity  
–20° to +70°C  
20 to 90% (No Condensation)  
1-7  
 
2. CONNECTIONS AND POWER-ON SEQUENCE  
2.1 SYSTEM CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . 2-3  
2.2 CONNECTING TO MAIN UNIT . . . . . . . . . . . . . . . . . . . . 2-4  
2.3 CONNECTING TO NETWORK . . . . . . . . . . . . . . . . . . . . 2-6  
2.4 POWER-ON SEQUENCE . . . . . . . . . . . . . . . . . . . . . . . . 2-7  
 
CONNECTIONS AND POWER-ON SEQUENCE  
This chapter describes the connections and power-on sequence for the LAN adapter. Read this chapter be-  
fore turning the power on.  
2.1 SYSTEM CONFIGURATION  
ConnectingtheLANadaptertoanetworkincludingahostcomputerallowsLANcommunicationwiththatcom-  
puter.  
J System configuration  
ConnectingtheLANadaptertoanetworkincludingahostcomputerallowsLANcommunicationwiththatcom-  
puter.  
Figure 2.1 shows the hardware configuration of the LAN adapter.  
External  
probe  
Emulation pod  
(Option)  
Probe  
Host computer  
Cable  
Pod interface cable C  
Pod interface cable B  
Pod interface cable A  
Main unit  
(Option)  
RS-232C cable  
LAN adapter  
Interface cable  
100 V  
ac power cord  
Fig. 2.1 System Configuration  
2-3  
 
CONNECTIONS AND POWER-ON SEQUENCE  
2.2 CONNECTING TO MAIN UNIT  
Connect the LAN adapter to the main unit (option) via the interface cable as shown in Figure 2.2.  
J Connection to main unit  
Connect the LAN adapter to the main unit (option) via the interface cable as shown in Figure 2.2.  
LAN adapter  
Interface cable  
Main unit  
Fig. 2.2 Connecting Main Unit  
2-4  
 
CONNECTIONS AND POWER-ON SEQUENCE  
J Cautions  
Turn off the power when connecting/disconnecting cables; otherwise, the LAN adapter will be damaged.  
When disconnecting a cable, hold its case or connector; otherwise, the cable may break.  
2-5  
 
CONNECTIONS AND POWER-ON SEQUENCE  
2.3 CONNECTING TO NETWORK  
Connect the LAN connector to a network including a host computer as shown in Figure 2.3.  
J Connecting to network  
Connect the LAN connector to a network including a host computer as shown in Figure 2.3. Use a light coaxial  
cable, aterminatorandaY-typeconnector(TorFtypealsoavailable)whichareoptionallyavailable. Theyare  
not attached to the LAN adaptor.  
To network  
Light coaxial cable  
Terminator  
Y-type connector  
Fig. 2.3 Connecting to Network (Examlpe)  
J Cautions  
Turn off the power when connecting/disconnecting cables; otherwise, the LAN adapter will be damaged.  
When disconnecting a cable, hold its case or connector; otherwise, the cable may break.  
2-6  
 
CONNECTIONS AND POWER-ON SEQUENCE  
2.4 POWER-ON SEQUENCE  
After making all the connections, turn on the power in the sequence: host computer, main unit and target (user  
target system).  
J Power-on sequence  
After making all the connections, turn on the power in the sequence: host computer, main unit and target (user  
target system). Set the power switch on the rear of the main unit to 1. The LAN adapter is switched on at the  
same time as the main unit.  
2-7  
 
Index  
Numbers  
10BASE-2, 1-5  
I
Interface cable, 1-3, 1-6, 2-3, 2-4  
IP address, 1-5  
B
L
BNC type, 1-5  
LAN cable, 1-3  
P
E
Port address, 1-5  
Emulaton pod, 2-3  
Ethernet address, 1-5  
Ethernet global address, 1-5  
Ethernet local address, 1-5  
Y
Y-type connector, 2-6  
 
For further information please contact:  
Japan  
FUJITSU LIMITED  
Electronic Devices  
International Operations Department  
KAWSAKI PLANT, 1015 Kamikodanaka,  
Nakahara–ku, Kawasaki–shi,  
Kanagawa 211, Japan  
Tel: (044) 754–3753  
FAX: (044) 754–3332  
North and South America  
FUJITSU MICROELECTRONICS, INC.  
Semiconductor Division  
3545 North First Street  
San Jose, CA 95134–1804, USA  
Tel: (408 ) 922–9000  
FAX: (408) 432–9044/9045  
Europe  
FUJITSU MIKROELEKTRONIK GmbH  
Am Siebenstein 6–10,  
63303 Dreieich–Buchschlag,  
Germany  
Tel: (06103) 690–0  
Telex: 411963 fmg–d,  
FAX: (06103) 690–122  
Asia Pacific  
FUJITSU MICROELECTRONICS ASIA PTE LIMITED  
No. 51 Bras Basah Road,  
Plaza By The Park,  
#06–04 to #06–07  
Singapore 0718  
Tel: 336–1600  
FAX: 336–1609  
FUJITSU LIMITED 1994  
Printed in Japan CM41–00411–1E  
 

Edimax Technology Network Router BR 6204WG User Manual
Fisher Paykel Refrigerator RS90A1 User Manual
Fisher Price Motorized Toy Car 75548 User Manual
Friedrich Universal Remote PDXRC User Manual
Gateway Personal Computer Profile 4 User Manual
GE Freezer FUM13 User Manual
GE Gas Grill ZGG300LCPSS User Manual
GE Heat Pump AZ58H12D User Manual
Golden Technologies Wheelchair GP620SS User Manual
Goodman Mfg Air Conditioner goodman High Efficiency 2 to 5 Ton Split System Air Conditioner User Manual