Harbor Freight Tools Automobile Accessories 43569 User Manual

CARGO RETAINING BAR  
ADJUSTABLE  
ASSEMBLY AND OPERATING INSTRUCTIONS  
®
3491 Mission Oaks Blvd., Camarillo, CA 93011  
Copyright © 2000 by Harbor FreightTools®. All rights reserved. No portion of this manual  
or any artwork contained herein may be reproduced in any shape or form without the  
express written consent of Harbor Freight Tools.  
For technical questions please call 1-800-444-3353  
Revised Cover Page  
 
7.  
8.  
STAY ALERT. Watch what you are doing at all times. Use common sense.  
Do not operate this product when you are tired or distracted from the job at hand.  
CHECK FOR DAMAGED PARTS. Before using this product, carefully check that it will  
operate properly and perform its intended function. Check for damaged parts and any  
other conditions that may affect its operation. Replace or repair damaged or worn parts  
immediately.  
9.  
REPLACEMENT PARTS AND ACCESSORIES. When servicing, use only identical  
replacement parts. Only use accessories intended for use with this product. Approved  
accessories are available from Harbor Freight Tools.  
10.  
11.  
12.  
MAINTAIN PRODUCT WITH CARE. Keep this product clean and dry for better  
performance.  
MAINTENANCE: Service and maintenance should be performed regularly by a qualified  
technician.  
USE THE RIGHT PRODUCT FOR THE RIGHT JOB. There are certain applications for  
which this product was designed. Do not use this product for a purpose for which it was  
not intended.  
SPECIFIC PRECAUTIONS FOR THIS PRODUCT  
1.  
This product is for use only with one level cargo. Do not use this product with cargo that  
is stacked two or more high. Doing so may result in damaged cargo and/or personal  
injury.  
UNPACKING  
When unpacking, check to make sure all parts shown on the Parts List (page #5) are  
included. If any parts are missing or broken, please call Harbor Freight Tools at the  
number shown on the cover of this manual as soon as possible.  
ASSEMBLY INSTRUCTIONS  
NOTE: All parts below refer to the parts listed on page #6 of this manual.  
To Use Cargo  
Retaining Bar:  
Cargo  
Retaining  
Bar  
1. Check to make  
sure cargo is packed  
firmly and securely  
against the front panel  
of the truck bed.  
Cargo  
Tailgate  
NOTE: Do not use  
this product when  
stacking cargo  
(two or more high).  
SKU 43569  
PAGE 3  
 
2. Hand screw the two Stands (part #3)  
inward until they are flush with the ends  
of Bar A (part #8) and Bar B (part #11).  
3
11  
2.  
3.  
While firmly holding Bar B with one hand, press in both knobs of the Spring Clamp  
(part #9) and extend Bar A (part #8) until the Rubber Spacers (part #1) are pressed  
against the cargo toward the front of the truck bed and against the truck tailgate at  
the rear end .  
Release the knobs of the Spring Clamp, and either extend or collapse the length  
of the Cargo Retaining Bar until the knobs of the Spring Clamp self-insert into the  
nearest Adjusting Hole located on Bar B.  
11  
9
8
4.  
Depending on the final adjustment length (up to 6”) required to firmly brace the  
Cargo Retaining Bar between the cargo and the truck tailgate, twist Bar A and/or  
Bar B counterclockwise as needed to extend the Stands at either end.  
3
8
SKU 43569  
PAGE 4  
 
To Release Cargo Retaining Bar:  
1.  
2.  
Twist Bar A and/or Bar B clockwise to screw the Stands inward until they are flush  
with the ends of Bar A and Bar B.  
While firmly holding Bar B with one hand, press in both knobs of the Spring Clamp  
and collapse Bar A into Bar B.  
MAINTENANCE  
1.  
For better and safer performance, keep all moving parts of this product clean and  
dry at all times.  
PLEASE READ THE FOLLOWING CAREFULLY  
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM  
IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER  
NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO  
THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PROD-  
UCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.  
IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT  
ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTI-  
FIED AND LICENSEDTECHNICIANS AND NOT BYTHE BUYER. THE BUYER ASSUMES  
ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL  
PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER  
INSTALLATION OF REPLACEMENT PARTS THERETO.  
PARTS LIST  
PART #  
DESCRIPTION  
QTY  
1
Rubber Spacer  
Nut  
2
2
2
2
2
1
1
1
1
1
1
1
1
2
3
Stand  
4
Screw  
5
Washer  
NOTE:  
6
Adjusting Bolt A  
Adjusting Bushing A  
Bar A  
Some parts are listed and shown for  
illustration purposes only, and are not  
available individually as replacement  
parts.  
7
8
9
Spring Clamp  
Guide Bushing  
Bar B  
10  
11  
12  
13  
Adjusting Bushing B  
Adjusting Bolt B  
SKU 43569  
PAGE 5  
 
PARTS DIAGRAM  
SKU 43569  
PAGE 6  
 

Graco Coffeemaker TI12743a User Manual
Gravely Lawn Mower 205640 User Manual
Hotpoint Microwave Oven RVM1535 User Manual
HP Hewlett Packard Calculator 39gs User Manual
HP Hewlett Packard Crib Toy 5990 1234 User Manual
HP Hewlett Packard Photo Printer A516 User Manual
Husqvarna Trimmer 227L LD User Manual
Husqvarna Trimmer 326ES User Manual
iLive Speaker System ISBW2113B User Manual
Image Treadmill IMTL11992 User Manual