SPDS-60CA 24V
®
Color Kinetics sPDS-60ca 24V intelligent, indoor, power/data supply is specifically designed for
®
Color Kinetics 24 volt Chromasic fixtures. sPDS-60ca 24V is a robust 62W power source with a
DMX interface. It is used for installations using a DMX controller such as iPlayer 2, ColorDial, or a
third party DMX controller. The DMX data driver conditions the supplied data to a format compatible
with the fixtures. The integration of power and data simplifies wiring installation, and the selection of
control configurations expands the versatility of the applications.
Push buttons on the front panel of sPDS-60ca 24V allow you to select the base address for each
power supply, thus eliminating the need for additional addressing tools. After the base address has
been selected, each light can be sequentially addressed or all lights can be set to a single address.
All functions can be monitored from the LED display located on the front panel.
sPDS-60ca 24V is housed in a compact enclosure designed for use in dry locations and complies with
National Electrical Code (NEC) requirements. The data drive circuitry has been specifically designed
with short circuit protection to prevent failures due to incorrect wiring or installation.
sPDS-60ca 24V automatically accommodates supply voltages ranging from 100VAC to 240VAC
using a standard IEC cable. All product and data connections are made to the external panels to
shorten installation time. sPDS-60ca 24V allows the DMX data to be daisy-chained through the RJ45
terminals from one supply to the next.
FEATURES
• Economical
• Compact size
• Ease of installation
• DMX ready
• Robust 62W power source
• Indoor rated
sPDS-60ca 24V SPECIFICATIONS
POWER INPUT
MAX CURRENT
100VAC to 240VAC auto ranging (50Hz–60Hz),
1.7A at 100V, 1.5A at 120V, .75A at 240V
Power factor correction (PFC)
DRY
POWER OUTPUT
24VDC (62W Max.)
HEAT DISSIPATION
25 percent of total power input
AMBIENT OPERATING TEMP 14ºF to 122°F (-10ºC to 50°C)
ITEM# 109-000021-00 (DMX)
HOUSING
Overall dimensions: 8.8” (22.4 cm) X 4” (10.2 cm) X 2” (5.1 cm)
Weight: 2.0 lbs (907 g)
FOR USE UNDER U.S. PATENTS 6,016,038, 6,150,774, 6,340,868,
6,608,453, 6,777,891, 6,788,011, AND 6,806,659.
CONNECTORS
Data: RJ45 input and output connectors
Power: 4-pin output connectors, IES power connector
OTHER PATENTS PENDING.
DATA INPUT INTERFACE
Color Kinetics DMX controllers or DMX512 compatible
©2005 Color Kinetics Incorporated. All rights reserved.
Chromacore, Chromasic, Color Kinetics, the Color Kinetics
logo, ColorBlast, ColorBlaze, ColorBurst, ColorCast, ColorPlay,
ColorScape, Direct Light, iColor, iColor Cove, iPlayer, Optibin,
QuickPlay, Sauce, the Sauce logo, and Smartjuice are registered
trademarks and DIMand, IntelliWhite, Powercore, and Video With
Light are trademarks of Color Kinetics Incorporated.
DATA OUTPUT INTERFACE Chromasic 24V
LISTINGS
UL/C-UL, CE
All other brand or product names are trademarks
or registered trademarks of their respective owners.
BR0167 Rev 00
Philips Solid-State Lighting Solutions • 3 Burlington Woods Drive • Burlington, MA 01803 • USA
sPDS-60ca 24V
functional flow diagram
DMX
DMX IN
Color Kinetics
Controller
DMX
OUT 1
OUT 2
DMX OUT
To Lights
DMX IN
DMX
OUT 1
OUT 2
Terminator
To Lights
For complete installation instructions and safety precautions,
refer to the sPDS-60ca 24V User Guide and wiring diagrams
Philips Solid-State Lighting Solutions • 3 Burlington Woods Drive • Burlington, MA 01803 • USA
|